Skip to main content
  • Home
  • Library
  • Read
    • Popular
    • Charts
    • Browse
    • Categories
    • Wikis
    • Glossary
  • Request
  • Activity
  • Leaderboard
  • Help
Our Apps
  • DaoSearch
  • Narratorr
Social
  • Discord
  • Patreon
Douluo: Live Long Enough to See It All
Chapter 2043

Means of Transportation

2,183 words 7 min read 0 views 3h ago Source ​
Skip to the end of the chapter
Prev
Next

This is a unique phenomenon in this universe. The energy required to electrolyze water in this universe is much greater than in other worlds. The energy barrier that needs to be overcome to electrolyze water is extremely high, and this energy is naturally stored in the gas produced after the water is decomposed.

This is a key reason why Direct Current) was developed here. Compared to Alternating Current), the biggest advantage of Direct Current is that it can separate Hydrogen Gas and Oxygen Gas during water electrolysis.

This allows Hydrogen Gas to be stored separately, at a much lower density than its storage capacity. Only this amount of Hydrogen Gas needs to be carried when traveling. During this process, the gas won't be temporarily depleted due to low temperatures. When water is needed, the gas can be ignited to obtain water. Moreover, it's liquid water, meaning that during long journeys, there's no need to worry about the liquid water freezing during the trip, preventing further travel.

The only problem is that Hydrogen Gas is difficult to store for long periods. While it seems like a gas that can be stored, and other gases could be stored in the same way, the molecules are so small that they leak through the gaps between them in most containers. So, don't expect to play with hydrogen balloons bought on the street for many days. Within a few days, the balloon will stop suspending in mid-air because the gas leaks out through the gaps.

However, compared to the time it takes for liquid water to freeze in cold environments, Hydrogen Gas can be stored for a sufficiently long time, providing enough liquid water for long-distance expeditions.

More importantly, if you are simply carrying Hydrogen Gas, one advantage is that the mass will be very low during transport.

This is a very simple principle: hydrogen accounts for a very small proportion of the mass of water. Even if a container capable of withstanding high pressure is used to carry it, the additional mass required is far less than that required to carry liquid water directly.

This method allows for the carrying of more water in a smaller space and with less mass.

After all, there are no large livestock in this world. Carts have to be pushed and pulled by people. The available animal power is limited, which also limits the weight that a car can carry.

In this situation, the role that the car can play must be carefully utilized, making the best use of every bit of space and weight it can carry.

As for the Hydrogen Gas cylinder, that's relatively easy to make. The people of this world have a unique advantage in metal processing. To process such a seamless steel cylinder in water is as difficult as blowing a glass bottle. You can directly knead the shape of the bottle like dough and then blow it up little by little. In this way, you basically don't need to worry about gaps. As long as there are no problems with the alloy manufacturing, the strength can also be guaranteed.

In other, relatively primitive Civilizations, the production cost of such steel cylinders would be astronomical, but here, they are hardly anything precious.

After numerous attempts in the materials science lab, they found several bottles that could relatively effectively prevent Hydrogen Gas leakage. The remaining task was to pressurize the bottles to hold more gas. For this, they opted for a structure similar to an air pump. Since the bottle's structural strength was guaranteed, even higher than that of a one-piece Forging bottle, as long as there was enough force to pump in, they could theoretically create a liquid environment inside. Their ability to process metals with high precision, combined with relatively soft materials, allowed them to create extremely airtight cylinders to complete the inflation process.

In this day and age, driving long distances is a rather dangerous thing, especially exploring unknown territories, which requires unparalleled courage.

Therefore, the king of this kingdom is quite tolerant of the costs incurred by explorers and is willing to pay extremely high prices to allow exploration teams to conduct their missions.

In the process, they also considered how to improve the power of these vehicles so that they could travel to farther places. For a long time, they could only rely on people pulling the vehicles for long-distance travel, which was too limiting.

The rapid pace of productivity development prevented the emergence of a slave society. Otherwise, simply pulling carts could have solved the current problems to some extent, though efficiency still needs improvement.

People in this world have begun to think about how to make something like an engine in a car to propel it forward.

Some people have tried making pedals like those on a bicycle and using them on the vehicle. This method is somewhat effective, as it reduces effort on flat ground, just like riding a bicycle. Several people can ride together, making it faster and easier.

However, this method can only be used on flat ground. If it is on uneven ground or uphill, this method is even more tiring than pulling the cart directly.

But this is already a significant improvement, at least on downhill or flat ground, it can save a lot of manpower and greatly increase the speed.

With the invention of four-wheeled bicycles, some people began to try two-wheeled bicycles. The biggest difficulty in producing Tires are still relatively difficult to produce.

After all, there are no rubber trees in the tropics in this world, and synthetic rubber requires things like petroleum to make. So far, Tires can only be made from animal fur or plant fibers, which has certain shortcomings in shock absorption and makes riding them somewhat tiring.

But this is already a fairly excellent means of transportation; with this new mode of transport, at least traveling between different caves becomes much easier.

Roads, several kilometers long, were built between the different caves. These roads were originally only accessible on foot. Even with vehicles, the journey would not be faster than walking. As a result, traveling between different caves took a considerable amount of time, making the flow of goods and people difficult. People in a cave could basically only work in their own cave. If they wanted to work in other caves and gather labor together, commuting time became quite troublesome.

But with the advent of automobiles, a distance of a few kilometers is no longer a problem. The roads between caves are not formed by flowing water or wind in nature, but by human construction. Without the influence of other external factors, these roads are quite smooth.

On such roads, one can ride a bicycle-like device through different caves. Even the longest cave, which is nearly ten kilometers long, can be traversed in just two or three hours.

Furthermore, riding faster could further shorten the time. This change may not seem revolutionary, but it had a significant effect: it allowed people from different caves to gather in the same cave. The difference between a concentrated workforce and one scattered across various locations is enormous. Being able to gather a large number of people for centralized work enabled the construction of relatively grand projects.

Industrialization itself requires concentrating a large amount of labor in cities. And now that they have the ability to concentrate labor, the expansion of the cave began. Compared to the water conservancy projects of people living on the surface, the projects undertaken by the people of this world should be called fire control projects.

This involves channeling magma through pipes to various parts of the cave, creating a geothermal effect and making the temperature in most of the cut areas within the cave suitable for habitation.

In addition, they also carved out the rock walls around the cave. After carving out these areas, they could gain more Survival Space. By building new lava rivers in these Survival Spaces, they could maintain a relatively comfortable environment in this space.

As for this underground world, a large amount of water was transported in. Magma flowed through underground pipes, and above the magma pipes was a groove filled with flowing water. With this water as a heat conduction medium, a small amount of water vapor could exist in the cave, and the presence of water vapor could resist the damage of high temperature to the human body.

Simply getting too close to the riverbank can cause the skin to scorch due to the high temperature. However, if you pour a basin of water into the lava, the water will not boil but will slowly evaporate. With a sufficiently high water vapor content in the hot air, the harm to the human body will be greatly reduced, and you will not be burned by the lava at a relatively comfortable temperature.

Humans in this world have figured out how to modify the world's environment to suit their own survival.

Water is almost a panacea, and in the future, people will probably be more accustomed to living in a humid environment, surrounded by water vapor.

The Central Cave was expanded to five times its original size during this process. Larger factories were built in this most suitable area for human habitation, while mines were located right next to one side of the cave.

Living in underground caves, mining is practically an innate skill for them. The planet is also relatively rich in mineral resources, and by constantly exploring caves, they can discover all sorts of mineral veins underground. This is a major reason why they never lack metal during construction.

In addition, another major project was the systematic transportation of ice and snow from the outside into the cave, which could truly be considered a water conservancy project, although ultimately it still required cutting ice blocks from the outside.

The only difference from before is that the ice blocks are now located downstairs from the outside. They can slide directly down the chute from the ground all the way into the cave. Because it's all downhill, even without vehicles, the relatively smooth surface of the ice blocks makes it easy to reach the destination. Then, in a huge pool heated by lava—or more accurately, a super-heat-resistant iron pot—the ice melts into water at a temperature suitable for humans. This water then flows throughout the cave, maintaining an environment suitable for human habitation.

For humans in this world, the most comfortable thing is probably to come home after a busy day of work and take a bath in warm water heated by lava. Only when the whole body is immersed in the water can humans feel the true comfort of their own temperature.

As their industrial capabilities increased, their research and development capabilities also improved. Having tasted the benefits of the transportation sector, they had even more power to develop self-propelled vehicles.

However, in this world, the Steam Engine was out of the question, and humanity pursued two technological paths simultaneously: one was the Internal Combustion Engine, and the other was the Stirling Engine.

Both directions represent technologies that can be realized in this unique world. Let's start with the Internal Combustion Engine, or more accurately, machines that use natural gas.

Using the reciprocating motion of cylinders to drive rotation has been widely recognized as an effective method of power conversion. However, since petroleum, a fossil fuel, had not yet been discovered, Hydrogen Gas was used to provide energy.

The people of this world actually wanted to use Electric Motors to power their cars, Electric Motor even manufactured them. The problem was that having Electric Motors didn't mean they had batteries with sufficient capacity. Batteries were a very troublesome problem even in the 21st century, and they hadn't been effectively solved yet. After all, batteries are inherently very difficult to manufacture, and this world's industry was only in its early stages of development. How could they possibly manufacture portable, high-energy batteries?

So the only option is to use a roundabout method: first, obtain Hydrogen Gas through water electrolysis, and then use this gas as fuel. Of course, some people have tried using Methane as fuel, and fermentation can also produce this gas to some extent. Fuel is undoubtedly a very expensive thing in this world.

In contrast, the Stirling Engine is much more practical for the inhabitants of this world. It is a machine that can operate as long as a heat source and a temperature difference are provided, and this world has abundant magma resources. More importantly, liquid water itself has a huge temperature difference with the outside world, which can be used as an energy source for this type of engine.

[To be continued]

Please add this to your favorites and vote for it!

End of Chapter
Prev
NovelSummaries
Next

Comments

No comments yet.
AboutStatsAPIChangelogStatusContactPrivacyTermsDMCA
© 2026 RandomTranslator·v3.26·RSS