This world's unique ecological environment has also led to the development of unique technologies, such as trains powered by the heat of magma. The way these trains are built is quite peculiar, with the tracks constructed above magma rivers.
Even for a considerable portion of the train's journey, it travels over the top of lava. The engine's heat-absorbing grid is located under the vehicle's chassis, allowing it to move forward automatically without any external power when passing over the lava.
This completely separated railways and highways into two separate systems.
Highway systems should avoid underground lava rivers as much as possible. This is to ensure the safety and smooth flow of traffic, preventing drivers from being suddenly engulfed by gushing lava while driving.
However, the railway system needs to guide the flow of the lava river, traveling above it. The railway is mostly made of high-temperature resistant materials. The closer it is to the surface of the lava river, the more efficient it is in utilizing the heat energy below. This means that most of the time, the trains do not need to carry much fuel. They only need to absorb some lava at the stops to keep the trains running.
In some ways, this thing can still be called a train, since it really does run by burning fire, and moreover, it runs on molten lava.
Because of the harsh interior environment of these vehicles, there are basically only people in the front of the vehicle; they are not used to carry passengers, but rather to transport various industrial materials.
With the construction of these railways, various ores and finished materials needed by industry can be transported to various places at high speed.
Moreover, it is quite energy-efficient and cost-effective, requiring almost no additional energy consumption to deliver goods to their destination in a single transport.
This is an environment unimaginable on Earth. Of course, it's also hard to imagine an environment on Earth where it's freezing cold and where temperature differences have such a significant impact on humans.
The roar of trains connects the underground caverns. With the advent of these subways, a few more, located far from the lava fields, are also under construction as underground public transportation Networks, allowing for further expansion of the city.
The more people a system can accommodate and the more people it can utilize, the faster it can drive industrial progress.
However, the location of population concentration is gradually shifting. Construction along roads is gradually moving towards the sea. Industrial centers on land will eventually become secondary industrial centers. With the discovery of the ocean, the ocean will become the true focus of industry. In seawater, humans can maintain a comfortable life for a long time. The temperature will make people feel extremely comfortable.
At the same time, various processing industries can be carried out very easily in this environment.
The challenge in underwater processing is not how to soften the metal, but rather how to harden the softened metal after mixing.
At this point, we can't just consider metallic materials. Not all metallic materials can withstand high temperatures. At such high temperatures, sometimes alloys must be mixed with some non-metallic substances.
The physical conditions of this world are so peculiar. Humans are not yet capable of building cities underwater, but they have already determined their direction of development. Humans in this world will evolve towards an aquatic lifestyle.
As they emerged from their slump with the help of guidance, humanity in this world gradually began to prosper. Without the suppression of intelligence, humans are actually a very tenacious species. Even in extremely harsh natural environments, without the interference of Primordial Myriad Races, they can still find their own way to survive in complex and peculiar natural environments.
As the population gradually increased, the world's industrial technology also began to develop continuously, becoming more and more advanced.
People also began to develop in directions beyond just clothing, food, shelter, and transportation. In addition to these basic survival needs, people also needed easier access to knowledge. Previously, knowledge in this world was recorded on fibrous materials similar to paper.
However, this kind of thing is ultimately too inconvenient, especially in underground environments or underwater.
Needless to say, if this type of fiber paper is placed in water, it will immediately become like a puddle of mud.
Especially since the water temperature in this world is very high, even plant fibers, which can withstand such high temperatures to a certain extent and adapt to them like the human body, are absolutely unsuitable for use in water.
Furthermore, if used in the relatively dry environment of a cave, the paper must be stored in a place that is extremely cold for humans. This is because the temperature in such cold places can drop to below fifty degrees Celsius (equivalent to this world's temperature). If these papers are stored in a much warmer and colder environment, they will spontaneously combust.
When people approach Lianjiang, they feel their skin dryness, and the same is true for these papers. To store them for a long time, they need to be wetted, then frozen one by one in a relatively cold environment until they become ice blocks, and then stored.
Once frozen, the paper is much less likely to be damaged. Even if placed near lava, at most the water in the frozen paper will slowly melt, and it will not directly catch fire.
However, this also presents a problem: the paper loses its flexibility during the freezing process.
In such an environment, paper becomes cardboard that is difficult to fold. If you fold it forcefully, it is very likely to break in two.
Another problem is that after freezing, the surface of the paper is as smooth as ice, and it no longer has the property of absorbing ink. Writing on the paper becomes impossible under these conditions.
In such a harsh environment, you need to first write down what you want to record on paper, and then freeze and seal it away completely.
Books in this world are not bound. Instead, the pages to be read are placed in a box, like playing cards. When needed, the pages are pulled out. A small number of books are bound like normal books, but their binding method isn't simply gluing one side together. These frozen pages have almost no elasticity. Their binding method involves punching holes in the paper and then connecting them with spring-like mechanisms, allowing for page turning. However, while turning these pages doesn't disrupt the order due to forgetting the sequence, it also presents some problems. For example, if too much force is applied, the connecting lines are easily broken; the paper, lacking flexibility, suffers from this issue.
Moreover, even with these improvements, it still cannot be used underwater. The people of this world have begun to explore the field of chemical engineering. Because of the unique properties of water, their path in chemical engineering is also very strange.
Plastics are difficult to manufacture because they don't contain petroleum, but they extracted a similar chemical substance from the interior of a plant they cultivate. Because it contains water of crystallization, it has a certain degree of heat resistance, somewhat similar to the properties of plastic, making it more suitable for writing than ordinary paper. Its heat resistance also prevents it from burning easily. It can be easily stored even without water. The only slight inconvenience is writing on it; without the fibrous properties, writing on it will only float on the surface, requiring a marker-like substance.
However, writing underwater is difficult even on fibrous paper. On non-fibrous, plastic-like paper, writing would require highly concentrated ink, or a completely different approach, such as carving, to leave marks. This is also possible, as manufacturers have considered underwater use when producing these papers. Underwater, all pens will leak ink, even specially designed ballpoint pens, and face similar problems.
So how do we solve this problem? We simply abandon the ink in the pen and focus on the paper itself.
Even disregarding the possibility of the paper slipping through, carving words on a blank sheet of paper would be extremely difficult to discern. Writing on a stone slab, however, is much easier to identify because of its more pronounced unevenness. A slight side view makes the uneven texture easily visible, thus making it relatively easier to decipher what has been written.
However, if we look at it from another angle, if there are obvious optical phenomena after carving words on paper, then writing on paper by carving becomes one of the feasible solutions. The initial engineers thought that they should create a material that can change color under pressure, or a material that may change color when cut.
After developing along this line of thought for quite some time, they discovered that it was not feasible. It was almost impossible to create entirely new compounds or even synthesize new elements for labeling using this method simply by applying this pressure.
Theoretically, this technology exists, but current Civilizations cannot develop it. However, the temporary alternative technology is actually quite simple. With just a little ingenuity, this problem, which might otherwise require a great deal of technology, can be solved.
The engineers in this world offered a solution by replacing ordinary paper with two- or three-layer paper.
The outer side of the paper is normal white, but the inner side is black or another color. Then, place the two pieces of paper face to face, leaving only the white side exposed.
In this way, when using these papers, one only needs to carve a hole in the paper to see the white paper with black writing on it.
This method allows you to leave what you want to write on paper, and the technical difficulty of doing so is obviously much simpler than changing the color of the paper surface by compressing it and maintaining that color.
This shows that humanity in this world is by no means lacking in creativity. While this new material is difficult to apply ink to, when two sheets are joined together, it becomes a fairly perfect writing material, even allowing writing on the back. However, this leads to some topological issues during writing. If some characters have identical empty spaces inside, writing on them might cause the paper in the empty spaces to fall off. This tests the adhesive; it must be strong enough to ensure the two sheets stick together securely and won't break when wet.
Okay, now that we've got this chess game sorted out, writing underwater will be much easier. Currently, this plastic-like paper doesn't pose much of a problem for writing on. It's easy to scratch the surface, and once a mark is left, it's not easily damaged. However, compared to traditional paper, information stored this way is still more prone to spoilage.
Moreover, the people of this world were not limited to storing information through paper. They wanted more efficient information storage devices. With the invention of this new paper, they wondered if information could be stored on paper strips. Previously, the writing they used was still hieroglyphic, so writing on paper took up a lot of space and was inconvenient for mechanical devices to read.
Conversely, if we transform writing into another form, such as Binary, then the space occupied by a single character can be compressed to a smaller size, and it would be easier to write the character successfully in special circumstances.
Therefore, their development direction began to move towards magnetic tape. Magnets must exist in this world, after all, they invented the earliest Generators that way.
However, it's often unsuitable for underwater use. Current Generators are rarely used underwater, partly due to the risk of electrical leakage, and partly because the water temperature is relatively high. High temperatures often lead to demagnetization. If conventional particulate matter is to be used to make magnets or magnetic tapes, it's necessary to consider whether the high temperatures underwater will cause demagnetization.
As a result, magnetic tapes in this world have taken a different path in their development. While they are still media for storing information, they do not necessarily need to be magnetic. Theoretically, any material that can leave a trace can be used as a medium for storing information; materials with a certain degree of magnetism simply make the process of reading and writing easier.
[To be continued]
Please add this to your favorites and vote for it!