With countless people busy day and night, the three years of Faction Territory Retention Time passed by in a flash. In the past three years, due to the integration of technology, the strength of the fleet's war technology system has increased a lot. Materials, weapons, and energy have all been significantly improved.
But there is also a product that cannot be copied within three years, Getter Ray.
Even if Luo has fully analyzed all the technologies contained in the trial Getter in the past three years, and is even sure that he can create a more perfect body than the trial Getter, because the energy source of Getter Ray cannot be copied, even if he creates a more perfect body, it cannot become a real Getter because of Getter Ray.
According to the calculations of Luo and his subordinate researchers, it would take seven years to copy Getter Ray at the current speed. Xiao Ran I don't know how many years it took the doctor from the Geta World to copy Getter Ray. But it would still take seven years to gather the power of all the territories of the entire legion. A total of ten years is already considered a very long time.
It is not difficult for the entire research department to completely crack the other technologies of Geta. Apart from Getter Ray, the technical content of other parts of Geta is not as high as expected. Even the technical level of 0079 World can be fully analyzed. The only one that is really special is Getter Ray.
In comparison, on a purely technical level, the technical content of Getter NEO is higher than that of Gaita, but Getter NEO has also been completely analyzed. In terms of materials, the biggest difficulty related to the production of Getter Active Alloy has been resolved, and other technologies are really nothing to the current scientific research strength.
Getter NEO Prototype Machine After the first year passed, three generations appeared in the territory. The first generation Getter NEO Prototype Machine was completely imitated from Getter NEO. The manufactured product, except for the slightly different additional weapons, Beam Rifle, Beam Saber, beam weapons that can be used in three forms, even the appearance after transformation is not much different from Getter NEO.
By this generation, the territory actually had all the capabilities to manufacture Getter NEO. However, the department that developed the Getter NEO body was not satisfied with just this. According to the current situation of the fleet, it conducted a second research. The second Prototype Machine was launched only half a year after the first Prototype Machine was launched. However, the second newly developed Prototype Machine is already completely different from the previous version.
The concept of the first generation is replication, while the concept of the second generation is fusion, so that the three Getter NEO aircraft have excellent individual combat capabilities even if they are separated. Integrating the existing fleet of fighters is also a fighter, so that the three combined fighters also have the ability to transform, which has become the key goal of this research and development.
After half a year of research and development, the first test machine of the Getter NEO type 2, which was completely re-developed and manufactured for the flexible use of Gettar alloy, has rolled off the production line. It is a product manufactured by combining the current Variable Fighter technology. In fighter form, it is very different from the Getter Fighter, and already has many features of the Variable Fighter VF-30 series of the fleet.
The experiment was ultimately successful. Three fighters with three-stage deformation capabilities were successfully combined into a brand-new tower. The new tower looked completely different from Getter NEO. It was thinner and the skeleton of the deformed structure was exposed in many places. This was a complete experimental machine, not even equipped with a weapon.
However, it took a year to go from the second generation to the third generation final product. The entire year was just to supplement and improve the second generation test aircraft. It took longer than the original direct construction of the new fighter aircraft for assembly, but the final result was extremely gratifying.
The final new model completely abandoned the name Geta, because apart from the same three-machine combination mode as Geta, this body no longer had much to do with Geta and became a completely new series.
Before being combined, the three fighter planes have the same three-stage deformation capabilities as the ordinary Variable Fighter. Fortress Mode and MS Form are in the same shape as fighter planes, but their appearance is more different from ordinary fighters.
The three newly manufactured combined fighter aircraft have different bodies. They all use Geta alloy as Outer Armor. The ductility and flexibility of the alloy are combined with the multi-stage deformation structure to achieve the purpose of deformation, and they are all slightly larger than the normal Variable Fighter.
The first body is a high-speed body. It has seven layers of appearance similar to the ancient model VF-4. However, it is more streamlined, larger, stronger and thicker. It naturally looks better and more domineering. It has retractable and foldable small flying wings and uses a modified beam Gatling gun. The rear thruster module is obviously stronger than the normal body.
The body shape will naturally be larger after the body is larger and deformed, but even so, the feet look a bit thicker, and some weapons are attached, such as the two round small Positron Cannon doors, and these two small Positron Cannon doors directly replace the arms, and the palms are directly from the Positron Cannon The muzzle of the E is "long" and can be "retracted" when not in use. With the addition of the Positron Cannon, which is the two Beam Saber mounted on the wrist, the single combat capability is no worse than the normal Variable Fighter.
Unit 2 is a multi-purpose body. It can add reconnaissance equipment to become a reconnaissance aircraft, and can use a sniper rifle to become a sniper aircraft. Its stealth performance is the best among the three aircraft, which may have a lot to do with the shape of the body. Mirage System is also installed, and the number of weapons carried is also the least.
In addition to the standard missile launch capability of a separate machine body, Beam Saber, two doors and the Beam Gun that is available in other machines are installed on the machine body. All other weapons will be matched according to personal needs during attack. According to occupation or personal ability, you can choose a sniper rifle, Beam Cannon or standard Beam Gun, so both appearance and use emphasize specialness and versatility.
Special refers to giving special abilities to the body itself or after combination, such as the launcher of Mirage System, Solar Furnace, λ-DRIVER, Thermal Ray, which can allow ordinary people to The Psycho-frame System that can be used, and all Unit 2 are equipped with these things, so the body itself does not have the conditions to install other weapons. It can be said that the body is the most selective for the driver but the least selective for the driver.
Those who can exert the power of λ-DRIVER can better utilize the capabilities of this machine, and people who cannot use λ-DRIVER can also use it.
In terms of shape, the general shape of the VF-171, which is the most versatile and has undergone several evolutions, has been used. It has undergone some unique modifications due to the need for combination, resulting in some changes in the shape of the body. The size is also larger than Unit 1 and has several more interfaces.
The Unit 3 is a complete heavy firepower body. It has the most powerful firepower and the most powerful energy. It can be regarded as a weapons arsenal in itself. Its appearance is based on the VB-6K? nigMonster, but its structure has been modified and it has beam-directed armor. Its defensive firepower is the highest among the three bodies, and its flexibility is the lowest.
Missiles, Beam Cannon, Positron Cannon, GN Dragoon, Solar Furnace, Beam Directional Armor, have the ability to launch large missiles, namely MED Warhead or Reaction Missile, and are completely extended in the direction of firepower and armor.
All three bodies use Getter Active Alloy as Armor Material, so it is not surprising that the armor changes from square to round due to the deformation of the internal skeleton during deformation. With the addition of VPS and Energy Conversion Armor as supports, there is no need to worry about the strength of the skeleton and the strength of the armor.
The three bodies are also combined into three different forms. Unit 1 is the general combat form with the head. After combination, the feet of Unit 1 become the arms of the combined machine. Two doors Positron Cannon will appear on both sides of the head, Unit 2 is in the middle, and Unit 3 is located below. The flying wings of Unit 2 have become the flying wings of the rear group and the body. The arms of Unit 3 have become the skirt armor and shield of Beam Directional Armor's ability. The weapons are both near and far. The original beam Gatling gun has become the huge Beam Saber, which has the strongest general ability.
Unit 2 is in a space combat form with the head at the head. Because of the relationship between Unit 3 and the middle, the feet of Unit 2 originally became a pair of adjustable flying wings. Unit 1 uses the highest propulsion capacity to achieve the fastest speed among the three forms, but it does not have strong land combat capabilities. The main attack method is shooting, and it can maximize the effect of λ-DRIVER.
With Unit 3 as the head, it will have the strongest firepower in all forms. The four giant cannons that cannot be used in other forms will be extended, and all the weapons on the body will also be used. The main attack methods are fire coverage and fire bombing.
In general, the No. 1 form emphasizes general capabilities, the No. 2 form emphasizes high-speed combat capabilities and special operations, and Unit 3 emphasizes maximum firepower. The same is true when separated. However, no matter in which form, once the combination of Mirage System is common, Solar Furnace installed separately on Unit 2 and Unit 3 can also get the same frequency. With the addition of Unit 3's assisted driving mass production Haro, the use of GN Dragoon is not a problem at all.
This new body was named CD-1, also called Guardian Type 1. The three machines were separated into C body, and after being combined, they became B body. Perhaps because it was built in the territory under the jurisdiction of Real Zone, it was also rated according to the level of Real Zone.
After completion, only fifteen sets were manufactured, one of which was taken over by Xiao Ran and placed on Galaxy Diva. El-Elf drove Unit 1, Moses drove Unit 2, and Billy drove Unit 3.