After Dong Wu's hammer blow, Feng Wu roughly understood their meaning.
Because of the variable of increasing temperature due to Dong Wu and his team hammering the material, the temperature required for casting must not be constant.
As the hammer falls, the material heats up, and Feng Wu must immediately reduce the temperature of the flame.
During the intervals between hammering, the material temperature will naturally drop, and the Feng Wu will require raising the material temperature again.
Moreover, because Dong Wen Dong Wu used different angles, directions, landing points, forces, etc., and their hammers were applied differently, the resulting temperature rise within the material would also be different.
There will definitely be slight differences in temperature at different locations of the material being forged.
The requirements vary, and the hammer falls very quickly during the actual forging process.
The control of the flameless Feng Wu, the observation and prediction of material changes, and even the precision required, as well as the frequency of temperature changes in the Fire Control, all require a high level of expertise.
Theoretically speaking, the materials used in these weapon-refining processes are much more resistant to damage than the plant materials, mainly flowers, grasses, trees, and leaves, that Feng Wu used when Feng Wu.
Within a certain temperature range, as long as it doesn't turn into water, it can continue to be crafted.
The temperature can fluctuate within a range of hundreds or even thousands of degrees without being damaged.
Because metal remains metal even when cooled; even if it melts into a liquid, it will still solidify and retain its original form.
Unlike alchemy, where a slight difference in quality can turn everything to ashes.
However, Dong Wen said that a true Artifact Refiner would not forge weapons in this way.
"If it is forged that way, the weapon may be usable, but it will definitely lose its 'soul'."
Dong Wen pointed to the weapon that Dong Wu had just forged and said, "Forging also has a 'soul'."
To us, materials that are arbitrarily refined are simply waste, ruined by forging.
As he spoke, Dong Wen casually picked up another dusty short blade from beside the forge. Feng Wu seen plenty of such weapons piled up beside the forging table.
It didn't look very appealing, but with a flick of Dong Wen's wrist, its true appearance, which had been buried by other impurities and dust over time by the forging furnace, was revealed to the light of day.
It was also a sharp blade that gleamed with a cold light.
Judging from its appearance, it is also a third-tier blade.
"Feng Wu, what do you think of this weapon?" Dong Wen asked Feng Wu, holding up the Cold Blade in his hand.
"Sharp, Tier 3 quality, made of very good materials, it should be considered top-grade among Tier 3 Jin Shi materials."
It must be made of fine gold, no less valuable than the Iron Mother in this foundry.
Alchemist also need to be knowledgeable about all things. Although these Jin Shi materials are not the mainstream of alchemy, Feng Wu has also dabbled in them.
Feng Wu did have this much insight.
"Yes, it is indeed a third-tier Short Dagger." Dong Wen nodded, confirming Feng Wu's answer. Then he held up the Lake Blue Short Sword that Dong Wu had just forged and asked Feng Wu:
"Feng Wu, this short sword is also a third-tier weapon. So, what do you think of these two weapons?"
Dong Wen was like a teacher to Feng Wu.
Putting aside everything else, in terms of weapon crafting and casting alone, he and Dong Wu were indeed ahead of Feng Wu.
Feng Wu stupid. Looking at the two weapons, he naturally understood that Dong Wen's question must have a deeper meaning.
A third-tier Short Dagger is likely inferior to Dong Wu's Lake Blue Short Sword in many ways.
However, Feng Wu still truthfully expressed his thoughts. "I think the Short Dagger is slightly inferior to the short sword."
But since they're both third-order, the difference shouldn't be that much.
"Click—!"
Feng Wu sooner Feng Wu finished speaking than Dong Wen answered him with his actions.
The Lake Blue Short Sword fell suddenly, producing only a rather unpleasant scraping sound, and the blade embedded itself about halfway into the middle of the Short Dagger.
With a little more force, it will definitely break!
Feng Wu could see at a glance that at the point where the Short Dagger was cut, when it was sharply cut, the material itself seemed to have a crack that had been glued together.
Once cut, it naturally breaks apart.
Dong Wen took out the lake blue short knife, and there was a tiny bit of damage to the edge of the blade at the cut.
However, compared to the Short Dagger that was split in half, it was a minor flaw, and unlike the crack on the Short Dagger.
The lake-blue dagger looked more like a small piece that had broken off from a whole during a pure collision.
"A crack! An internal crack."
Feng Wu looked at the two weapons and replied, somewhat understanding Dong Wen's meaning.
"Yes."
Dong Wen tossed the two broken knives aside by the stove as if they were trash, and then said:
"This is garbage, the lowest grade among third-tier weapons."
I used it as a hobby when I was young; it's a failed attempt at forging. It's okay as a decoration, but using it in battle will get you killed.
Dong Wen patted Feng Wu on the shoulder and said:
"See? Temperature is very important."
The reason this Tier 3 dagger broke was because the material it was forged with had cracks.
The cracks originate from the uneven forging of the metal material.
Some parts are crisp, some are heavy, and some are soft...
There are only two possible reasons for this unevenness in the material.
The first type is the technique, the forging technique we use.
This situation can occur if the Artifact Refiner's skill level is insufficient.
Because he cannot handle this material perfectly, and he is not yet fully familiar with the properties of this metal.
Otherwise, even if it's not perfectly uniform, a uniformity of over 90% is acceptable, and some variation within a small range is fine.
Unfamiliarity and lack of ability—that's the first scenario.
As he spoke, Dong Wen suddenly looked up at Feng Wu and said, "There's a second possibility: Fire Control!"
"Fire Control?"
"Right!"
Dong Wen kicked the broken knife on the ground and said, "Fire Control is actually more important than forging in some situations."
With good Fire Control, occasional mistakes may occur, resulting in uneven heating of the forged metal material, which is perfectly normal.
However, poor Fire Control and excessive fluctuations in flame temperature will inevitably lead to uneven density throughout the metallic material.
Dong Wen casually summoned an orange Beast Flame, took out a piece of ordinary pig iron, and let it tumble and roast in the middle.
"Metals can even exhibit different properties at different temperatures."
Although they are still integrated into a large scope, the differences can be huge.
Forging the same material at 1000 degrees and 2000 degrees may look similar, but to us Artifact Refiner, the results are different.
The difference is significant.
It could even be described as a series of Class I and Class II materials.
However, if the flame temperature fluctuates greatly, a metal will be forged in seven or eight different ways, which we, as Artifact Refiner, would consider to be the result.
Then they were mixed together.
Unlike stacking and alloying, which involve skillful blending.
They were mixed together in a chaotic and disorderly manner, with more here and less there, without any pattern.
There are just too many varieties and quantities!
This naturally leads to various problems of uneven material distribution.
That will reveal flaws.
Dong Wen and Feng Wu said.
"So, the temperature of the metal must be kept within a certain range, the more stable the better?"
Feng Wu summarized what he had said to Dong Wen, then thought for a moment and said, "Shall I give it a try first?"