In fact, in the end, through genetic engineering, many people who lost their bodies later in life can grow back their bodies completely on their own.
For example, if a hydra, starfish, or planarian is cut in half, each half can grow back the missing half. Shrimp, crabs, and salamanders can regenerate limbs after being cut off, and some species of lizards can regenerate their tails after being cut off.
These animals all have the ability to "regenerate," but it is truly baffling that humans, as higher animals, are inferior to these lower animals in this respect.
The difference lies in the fact that the healing mechanisms of humans and animals are quite significant.
When a human loses a limb, cells close the wound and form a blood clot, which then scabs over, eventually leaving permanent damage to the limb.
These animals' wounds heal very quickly, and cells can quickly fill in the broken parts. These cells quickly return to normal and then begin to produce buds in order to grow new limb structures.
As the bud grows, it begins to develop into new hands and feet. Cells begin to proliferate and differentiate to create new tissues, such as muscles and bones. The new feet begin to lengthen and grow back from the toes to all the joints that were broken off. However, humans do not have buds, so the human body does not regrow its body.
However, it's best not to release it at this stage, otherwise it will cause considerable chaos.
For example, if such Gene Potion were developed, everyone would have the ability to "regenerate," which would be similar to human cloning. For instance, if you remove a diseased part, that part could also regenerate, wouldn't that be "indirectly killing someone"?
Therefore, at this stage, from the perspective of morality, family ethics, and bioethics, the conditions for a complete realization have not yet been met.
Only by fully analyzing human gene fragments can this problem be effectively solved.
The most realistic approach at this stage is to create a simulated body. In the bionic laboratory of Origin, Chu Feng finally saw bionic Artificial Muscle Fiber.
Human muscle fibers have different types, resulting in different strengths and contraction speeds. Every muscle in the human body is composed of various different muscle fibers, but the proportion of different muscle fibers varies in different parts of the muscle.
The proportion of certain muscle fibers in a person's muscles is determined by their genes. You could also think of it as the type of sport you're suited for being determined by your genes.
Therefore, it's no joke that some sports require talent.
The special biomaterials synthesized in the Origin Laboratory exhibited a shrinkage strength under thermal deformation that far exceeded that of human muscle of the same volume.
Therefore, from another perspective, these Bionic Body could be used to create "super soldiers".
After synthesizing these artificial biomaterials and neurons of origin, a simple muscle fiber is formed.
Next, these artificial muscle fibers were integrated in large quantities according to the human body structure, and then installed on a porous metal material that completely simulates the human skeleton, and a "brand new" body appeared.
The material responsible for heat conduction is Graphene, which allows the Artificial Muscle Fiber to contract and relax according to different temperatures, enabling the entire Bionic Body to move.
Because Graphene has excellent thermal conductivity, being the carbon material with the highest thermal conductivity to date, it is undoubtedly the rightful choice as the thermal conductivity material for Graphene Bionic Body.
Science tells us that resistance is necessary to convert electricity into heat energy.
However, Graphene is also the most conductive material in the world. Electrons move at 1/300th the speed of light in it, far exceeding the speed of electrons in ordinary conductors. Graphene's conductivity is stronger than that of gold and silver!
However, good conductivity means it cannot be used to make resistors, so only metals are the best resistor materials.
However, if it is just a simple metal resistor, it is uncontrollable. Simply put, it heats up when it heats up and cools down when it cools down.
You can't make a resistor half hot and half cold.
Therefore, only more precise electromagnetic wave heating devices can be used to control the different temperatures, which means that different micro electromagnetic wave generators must be integrated on the Graphene chip.
A tiny CPU can integrate billions of transistors, but integrating a miniature electromagnetic wave generator is not so easy.
Because these materials must be precise to the nanometer level at the very least, but fortunately, Origin has the manufacturing process for them.
A healthy person, regardless of age or gender, has a total of 639 muscles throughout their body.
It consists of approximately 6 billion muscle fibers, the longest of which is 60 centimeters long and the shortest is only about 1 millimeter long.
Large muscles can weigh 2000 grams, while small muscles weigh only a few grams. In most people, muscle mass accounts for 35-45% of body weight.
To manufacture such massive muscle fibers, sophisticated manufacturing equipment is essential; otherwise, small-scale production would be completely impractical.
"Let's make one hand and one foot first and see how it goes."
Chu Feng frowned as he looked at the materials in front of him, wondering what the final result would be.
Now that we've cracked the biomaterial barrier, the next step is to try producing it and see how it performs.
Because there is currently no large-scale automated production equipment, we can only rely on Engineering Robot to "manually create" each miniature thermal neuron.
The 3D printer over there wasn't idle either; it was printing skeleton parts.
Chu Feng still gets interested every time he sees this 3D printing process in progress.
3D printers are no longer a novelty; you can easily find tons of them on Taobao. However, while the printed products look good, they are far too crude for industrial applications.
Meanwhile, in a dazzling burst of laser light, the 3D printer at Origin Laboratory quickly printed out lightweight, porous alloy skeletons.
By the time the skeleton was fully printed, the dozen or so Engineering Robot had already completed the fabrication of all the thermal neurons.
On a thermal neuron as thin as a sewing needle, tiny electromagnetic wave generators are densely packed, each only 5 nanometers in size. Because they are so small, they can only be integrated onto the thermal neuron using the method of integrated circuits.
Each thermal neuron has 200 miniature electromagnetic wave generators. The next step is to attach the successfully manufactured Artificial Muscle Fiber to the printed bone in the same way as human muscles.
These were similar in size to the Engineering Robot around Chu Feng, but what followed was different.
The completed body looks like it has been dissected, which is quite creepy. The next step is to attach a sensor device similar to the Trailblazer's control device to the outside.
This allows for a perfect simulation of touch, enabling the creation of Bionic Body that can sense different temperatures and tactile sensations, which is the ideal state.
Different sensors integrate different information onto the main Graphene chip through Graphene circuitry. Then, by connecting to the nerve endings that have not been lost, different signals are transmitted to the neurons of the Bionic Body through this channel when the cerebral cortex issues a command, controlling the bionic muscles to perform different movements.
Thank you hmht for the donation. We hope everyone will join our discussion group; QQ group 623592113 has plenty of space.