Exposed Coin-style Electromagnetic Rifle!

After all, the handwriting detection agency is a legitimate institution, and behind it represents a fair and just thinking organization.

At this moment, the handwriting detection report all indicated that this handwriting indeed came from March six months ago, which naturally brought many imaginative scenes to the minds of those with active minds.

It didn't take long before various UP hosts added the content of this handwriting report to their videos, causing a huge stir!

Furthermore, through the UP hosts' patient research, they discovered that among the patents Xingtu Technology applied for at the same time, there were patents for partial frame architecture and cross type architecture!

It's known that these two architectures appeared in the design draft drawings from early March. Although the external appearance is different, the core is the same!

Xingtu Technology itself does not produce products in this area, so why did they register patents in this area? People became even more suspicious after seeing such news.

First, the handwriting proved it originated in March, and then they mysteriously registered patents in this area without having any products…

At this point, even those who didn't believe Lin Feng had plagiarized or was a patent thief had to believe it when faced with this evidence.

Consequently, the comment sections of all videos related to handwriting robots were filled with comments cursing Lin Feng and accusing him of being a patent thief.

Even in real life, Xiaohe Town gradually began to hear discussions and criticisms.

After all, with the previous news, many young people in Xiaohe Town who had discovered a new world had become users of Bilibili.

Under such circumstances, as the young people shared related matters with their parents or friends, discussions and criticisms naturally echoed throughout Xiaohe Town.

Even though there was no evidence online or offline proving Lin Feng had any connection with Zhisu Technology.

But it was inevitable that there was an unknown connection between Lin Feng's handwriting robot design draft drawings and Zhisu Technology's.

Facing unanimous suspicion and questioning, and a wave of negative public opinion, Lin Feng directly released his new video on Bilibili and Youku the next afternoon.

This naturally led many netizens on Bilibili and Youku who were following the matter to click on the video and check its content.

"In the past two days, many Bilibili UP hosts have not investigated the truth of the matter, and have just smeared me with some so-called evidence.

They have posted videos smearing me on Bilibili, Youku, Tudou, and other website apps.

Such behavior is quite laughable. This video will show them how ridiculous their baseless speculation and smearing are.

Of course, you must also be curious about what I've been doing during this time. This can be considered an early advertisement."

As Lin Feng finished speaking, the screen went black, and then a 3D model resembling a toy gun appeared. Next to this toy gun 3D model, it clearly read 'Coin-style Electromagnetic Rifle'.

"During this period, or rather, since I developed the handwriting robot, besides taking time to research and upgrade the handwriting robot based on consumer feedback, the vast majority of my energy has been devoted to developing the Coin-style Electromagnetic Rifle.

This Coin-style Electromagnetic Rifle is an electromagnetic rifle specifically designed for riot control and public security.

Its power is lower than a handgun. When it hits a target, it can cause bruising and pain to the target's limbs, making them lose the ability to resist, unlike a handgun which would immediately require hospitalization for rescue.

Therefore, this is a weapon specifically designed for riot control and public security.

With it, patrol officers and police officers don't have to hold back when firing, and don't have to worry about accidentally killing someone, leading to trouble from their families and friends.

With it, patrol officers and police officers no longer have to risk their lives fighting armed criminals and thieves with riot sticks.

We can completely incapacitate enemies within 15 meters, making them lose the ability to resist."

Speaking of this, Lin Feng said with a sense of emotion:

"Speaking of which, the research difficulty of the Coin-style Electromagnetic Rifle is far greater than that of the handwriting robot, although it seems simpler.

But it is very difficult to make it practical. It is no exaggeration to say that the research difficulty and cost of the Coin-style Electromagnetic Rifle are a hundred times that of the handwriting robot.

You may not know, but just to design a coil model that can perfectly fit the coin structure, the cost of renting supercomputers for calculation alone was 700,000!

With such a huge cost, the final goal is just to make a small coil generate 3.3 joules of kinetic energy for a coin!

Fortunately, after a month of effort, we finally achieved results. With the special coil that can generate 3.3 joules of kinetic energy for a coin, arranging them in a row can generate 36 joules of energy.

Ultimately achieving the research goal of incapacitating people within 15 meters by hitting them with a coin, causing bruising and making them lose the ability to resist.

Of course, the reason I chose to disclose this information is that the relevant hundreds of patents have all passed the preliminary examination this morning.

You can check this patent on the patent network, so it's not a big deal to reveal it now.

Currently, I am acquiring materials and looking for processing manufacturers to expedite the production of the parts I need, and finally complete the assembly.

In about half a month, I will release a test video on Bilibili and Youku, where you can see the combat effectiveness of the Coin-style Electromagnetic Rifle I developed.

But let's get back to the topic of handwriting robots."

As Lin Feng spoke, the video screen suddenly changed, showing a picture of an engraving machine!

"Why does this thing look so much like a handwriting robot? And why aren't you continuing to talk about the electromagnetic rifle?"

A bullet comment appeared on Bilibili, and soon, similar bullet comments appeared rapidly.

It was clear that people were very interested in the electromagnetic rifle Lin Feng mentioned, thinking it was very powerful and wanting Lin Feng to continue talking about it.

But the playing video didn't wait for them. Lin Feng appeared next to an engraving machine and then continued:

"You must all be curious about the source of inspiration for my handwriting robot, right? The inspiration actually came from engraving machines!

When I was studying at Qinghua University, my major was Automation, and I specialized in control systems and robotics...

A year ago, our class visited and studied the working principle of an automatic woodworking engraving machine. At that time, I publicly remarked that if it were miniaturized and a pen were added, wouldn't it be able to write?

If successful, then there would be no need to buy expensive printers or expensive printer ink anymore.

But at that time, when my classmates heard my idea, they all burst into laughter. Then a male classmate said that my idea was simply wishful thinking, that this thing had no commercial value at all, and it would be a waste of time and effort..."

You can ask the dozens of classmates in my year about this; quite a few of them should still remember it.

So, it all began a year ago that afternoon, starting with the woodworking engraver.

At the time, others just laughed it off and didn't take it seriously, but I wrote it down and the more I thought about it, the more feasible it seemed.

Ultimately, after graduating from Qinghua University, I didn't look for a job. Instead, I returned home to develop a handwriting robot.

When Xie Yun, an engineer from Zhisu Technology, designed the handwriting robot, I'm sure he must have studied the structure of engravers before drawing those design drafts.

As he said this, the video began rapidly switching through images of various different engraver structures.

The netizens looked at the pictures above and realized that the engraver images in the video were consistent with the three handwriting robot architectures applied for by Xingtu Technology.

There were only slight differences in appearance between the two; the core architecture was essentially the same!