Li Qingsong originally thought that, given the previous successful breakthroughs in 7 Nanometer, 5 Nanometer, and 3 Nanometer technologies, the 2nm chip technology would also be successfully developed.
But he did not expect that at this moment when he was closest to the limit, a number of extremely complex and difficult technical problems would emerge.
"Think about it, this is actually quite normal."
Li Qingsong sighed softly, "To precisely carve over 40 billion Transistors onto a silicon wafer within a few square centimeters, and then maintain their connections as shown in the blueprints so they can work together to perform their functions—how could that be simple..."
But no matter how difficult it is, we must do it.
After reviewing the existing technical obstacles, Li Qingsong resumed his efforts to overcome the challenges.
He discovered that a major obstacle preventing him from mastering 2-nanometer chip technology was the more severe Short-Channel Effect compared to before.
Leakage current is virtually uncontrollable at such a tiny size. This causes Transistors to malfunction completely, and a large number of Transistors will burn out instantly once power is applied.
Li Qingsong mobilized the brainpower of tens of thousands of clones, thinking, using supercomputers for simulations, and conducting various experiments.
Finally, he came up with a solution.
"Perhaps... I could change the way the Transistors is constructed? By wrapping the channel around the gate, I might be able to improve control and reduce leakage current."
Having thought of this, Li Qingsong immediately began to try it.
Using high-precision lithography equipment in the laboratory, Li Qingsong attempted to create a brand-new chip following the pattern of the Gate-All-Around Field-Effect, and then tested it with electricity.
After a series of tests, looking at the current data on the screen, Li Qingsong let out a long sigh of relief.
He knew that he had overcome the technical problem of leakage current.
But this was only the first difficulty encountered in the development of 2-nanometer chips.
Immediately after that, Li Qingsong encountered his second technical challenge.
How can we further increase the power of the light source to achieve a shorter wavelength?
Clearly, only with shorter wavelengths of light can smaller Transistors be sculpted.
But now, the lithography machine used by Li Qingsong can be called an "Extreme Ultraviolet Light Source" lithography machine.
The "ji" here means extreme.
But now, even "extreme" is not enough; we need to find ways to improve further.
Li Qingsong once again mobilized a great deal of brainpower and resources, and began an experiment regardless of cost.
Several days later, a new idea emerged from the mind of one of the clones and was simultaneously transmitted to Li Qingsong's head.
"Perhaps we could try other materials in Laser-Produced Plasma Light Source."
After some experimentation, Li Qingsong finally discovered that bombarding the Tin Droplets with a high-power Carbon Dioxide Laser generator produced a light source with a wavelength that met his requirements.
This problem has also been solved.
However, once the light source problem was solved, the Photoresist problem resurfaced.
Existing Photoresist cannot effectively absorb and react with light sources of this wavelength, thus making it impossible to effectively etch Transistors.
Furthermore, its sensitivity is not high enough. Although its defects were acceptable in the previous generation of chips, they have been amplified to an unacceptable degree in the current manufacturing of 2-nanometer chips.
"We need to develop new materials."
Li Qingsong pondered and launched another Materials Science experiment, manipulating hundreds of thousands of clones to conduct tens of millions of experiments. Finally, he found a material that met the current needs.
This is a new type of Photoresist based on metal oxides and organic-inorganic hybrid materials, which perfectly solves the various problems of the previous generation of Photoresist.
After that, new problems arose.
Insufficient reflectivity of the mask used in the photolithography process leads to energy loss of the light source, making it impossible to etch Transistors of sufficient quality.
Li Qingsong launched another research effort, attempting to use multi-layered molybdenum and silicon mirrors, and successfully solved the problem.
Even after that, one problem after another still arose.
The problems related to optical systems are numerous and almost endless, including stability, accuracy, thermal management, heat dissipation systems, and so on.
Often, once one problem is solved and you think things can proceed smoothly, hundreds or even thousands of new problems arise the next moment.
After solving these hundreds or thousands of problems, tens of thousands more problems will arise.
Sometimes, even the smallest problem can delay Li Qingsong's millions of chip research clones for more than ten days. But even if Li Qingsong mobilized enormous mental and material resources to finally solve the problem, he found that he had only made a small step forward.
Time passed slowly amidst the numerous emerging problems and the tireless attempts, reflections, and research of millions of clones.
Finally, one day, Li Qingsong solved another problem. When he subconsciously checked the problem list, he was shocked to find that the problem list was... empty.
Empty?!
A surge of excitement welled up in Li Qingsong's heart.
After so much hard work, have I finally mastered 2-nanometer chip manufacturing technology?
Although at this moment I only have the manufacturing technology in the laboratory, there is still a long way to go before large-scale mass production.
After entering the mass production stage, more problems will inevitably emerge, which will need to be solved one by one.
But at least in terms of basic principles and processes, I have truly mastered this technology! All subsequent problems will only be technical problems, no longer problems of principle!
Encouraged, Li Qingsong immediately began upgrading one of the factories that originally produced 3 Nanometer chips, replacing the original equipment with more sophisticated equipment, and attempting trial production.
As soon as trial production began, as expected, numerous problems resurfaced. But no matter, Li Qingsong had prepared one million clones, ready to respond at any time.
The problem has arisen; the solution is to address it.
Thus began a period of rapid optimization and iteration at the Chip Factory. Finally, after six months, the production line stabilized.
The first batch of 2-nanometer process chips has finally been produced.
Although the yield rate is currently less than 10%, meaning that out of the Chip Factory's annual capacity of 10 million chips, less than 1 million chips meet production expectations, it doesn't matter.
At least the supercomputer can be built now! The yield rate can be improved gradually later.
As a result, Li Qingsong took all of the approximately one million high-quality chips produced in the first year of the Chip Factory and used them all in the construction of just one supercomputer.
Meanwhile, a total of 100 newly built 2-nanometer process Chip Factory have already started production.