Compared to Offensive Laser Cannon, Defensive Laser Cannon are much smaller in power, mass, and size.
The overall structure of the Laser Cannon is similar to that of a telescope, with an outer lens tube and intricate optical components inside.
The diameter of a precision Laser Cannon's scope can reach up to 10 centimeters, and its length can be several meters. However, the maximum diameter of Defensive Laser Cannon's scope is only 1.5 centimeters, and its length is only about 30 centimeters.
Its strengths are also completely different from those of Offensive Laser Cannon.
Offensive Laser Cannon have a very small divergence angle, allowing them to attack relatively distant targets. Defensive Laser Cannon, on the other hand, target targets that are usually closer, having already passed through the Defensive Electromagnetic Cannon Defense Perimeter and are only tens or even hundreds of meters away from the spaceship. Therefore, their requirements for divergence angle are not high.
Its attack range is only a few hundred kilometers at most. Beyond this distance, it loses its lethality due to the dispersion of the beam.
Its power is also relatively low, and its lethality is very weak. After all, its targets are only small projectiles, so there's really no need for something that big.
Compared to its poor performance in other aspects, its activation time and duration are far superior to those of Offensive Laser Cannon.
It doesn't even require charging preparation time and can start instantly. At the same time, because of its low overall power consumption and minimal heat dissipation, it can be used for extended periods, sometimes running continuously for several hours, which is much more efficient than Offensive Laser Cannon that require tens of seconds of rest after starting up.
This was also tailored based on its tactical requirements.
After all, in the interstellar battlefield, there may be a large number of Electromagnetic Cannon Shell, and there are a large number of targets that need to be intercepted.
If the startup speed is too slow, the high-speed Electromagnetic Cannon Shell might hit the ship's hull before it even starts. If the duration is too short, how can you possibly stop all those Electromagnetic Cannon Shell flying everywhere?
The combination of various needs has resulted in the distinctly different designs and performance of Offensive Laser Cannon and Defensive Laser Cannon.
After a long period of continuous iteration and research, the Defensive Laser Cannon has now been initially perfected and is of practical significance.
Thus, Li Qingsong has mastered all four types of weapons: Offensive Electromagnetic Cannon, Defensive Electromagnetic Cannon, Offensive Laser Cannon, and Defensive Laser Cannon.
With the High-Speed Radar now undergoing three more rounds of optimization, its reliability and stability have been greatly improved, while its size and weight have been greatly reduced. It seems that Li Qingsong has now met all the requirements for building a truly "modern" warship.
But Li Qingsong knew it wasn't enough.
One crucial component is still missing.
High-Speed Swivel.
In the interstellar battlefield, both offensive and defensive weapons have extremely high requirements for accuracy and reaction speed.
It's possible that a spaceship will fly past at high speed in front of us, leaving only a fraction of a second, or even a few milliseconds, as the window for attack.
It is also possible that a projectile will suddenly appear and fly towards our side at high speed, leaving only a few milliseconds for interception.
The radar has detected it, and the defensive weapons are capable of hitting it. What's missing?
Aiming accuracy and reaction speed.
The muzzle of an offensive or defensive weapon must complete the corresponding turn in a very short time, changing from aiming at other directions to aiming at the target, and then immediately firing.
The reaction speed must be extremely fast; the target must be turned immediately upon detection. The turning accuracy must be extremely high; even a slight deviation will make it impossible to hit the target.
For a projectile 50 kilometers away—a very close distance for interstellar warfare and projectile speed—if the aiming angle of one ten-thousandth of a degree differs from that of a Defensive Electromagnetic Cannon or Defensive Laser Cannon, the error will expand to approximately 8.7 centimeters after 50 kilometers.
Even a heavy Electromagnetic Cannon Shell 5 grams typically has a size of no more than 1 centimeter.
An error of 8.7 centimeters is a huge difference.
After a simple calculation, Li Qingsong confirmed that to accurately aim at a target 50 kilometers away, the accuracy of Electromagnetic Cannon or Laser Cannon must reach one ten-thousandth of a degree.
It can be confirmed that in the interstellar battlefield, both Laser Cannon and Electromagnetic Cannon are necessarily in constant motion and must constantly change their aiming position, possibly changing their orientation dozens of times per second.
The spacecraft may be in constant state of violent maneuvering, transfer, vibration, or shaking. Under such circumstances, the muzzle needs to be moved dozens of times per second, and the accuracy of each movement must be as high as one ten-thousandth of a degree. The requirements for accuracy and speed are simply astronomical.
Even Li Qingsong isn't confident he can do it right now.
This technology has also been under development for decades.
At the beginning, even with the most advanced materials and the most sophisticated equipment he could find, Li Qingsong could only move the muzzle once per second, achieving an accuracy of one-hundredth of a percent, and that was only when the cannon was completely stationary.
This performance is actually quite high. But it's still far from meeting the requirements of actual combat.
Like the other key technologies, Li Qingsong could only mobilize a large amount of manpower, material resources, energy, and brainpower to continuously iterate and tackle this technology.
After spending a long time and pushing the technical level to its limit, Li Qingsong could only improve the accuracy by about a hundred times, which still did not meet the requirements of actual combat.
After reviewing the entire research process, Li Qingsong finally determined that there was only one way to break through the existing precision limit.
Develop stronger, less abrasive materials, while further improving metalworking processes.
Improving metal processing technology is straightforward; it's simply a matter of gradual refinement. However, the development of new materials is fraught with uncertainty.
Having been engaged in materials research for so long, Li Qingsong increasingly felt that developing new materials was not fundamentally different from the ancient Chinese alchemy.
Throwing random things into an alchemy furnace—only heaven knows what will ultimately be produced.
The same applies to Materials Science research.
Using all sorts of raw materials and going through all sorts of processing methods, such as heating, freezing, stirring, settling, chemical treatment, and so on, what kind of material will ultimately be produced and what properties it will possess is something only God knows.
Existing chemical, physical, and Materials Science theories are too outdated to develop suitable materials through theoretical calculations alone.
Since that's the case... then we'll have to use our ultimate move.
Following a rough theoretical direction, Li Qingsong directly established a 500,000-material research team, with two clones in each team. Each team tried a new formula and directly adopted a brute-force approach to carry out this Materials Science research.