The Beginning of the Sudden Change (Part 1)
Three weeks later.
The Su Manor.
It was still the same small courtyard where Xu Yun had previously prepared the generator.
At this moment, the courtyard had been completely cleared, and even the stone table and flowers had been moved away.
Throughout the entire courtyard.
The only odd relic remaining in the central area was a coffin-like structure with its top made of bricks pieced together in an arch.
Standing beside the equipment were Old Su, the Wang Bing brothers, Zong Ze, Wang Hou, Qifei, and others.
An elderly man with white hair and beard, yet remarkably vigorous.
Of course.
Xu Yun was also there.
At this moment, he was staring intently at the inside of the arched structure, his eyes fixed straight ahead.
Judging that the time was about right, he turned to Old Steward Xie:
"Old Steward, you can stop now."
Upon Old Steward Xie quickly replied, "Yes."
Turning around, he stopped the donkey that was pulling the blower and kindly placed a large handful of hay in front of it.
"Hurry up and grab something to eat, we'll need you later."
Brother Donkey:
"."
Xu Yun then looked at Qifei, who was already waiting there, cupped his hands in greeting, and said with a smile:
"Master Qi, thank you for your trouble."
"You're too kind, young master. It's just my duty."
Qifei gave him a very reliable look, then led several craftsmen to the equipment and used an iron bar to pry open a pre-installed cover.
As the lid was pried open, a stream of molten, viscous iron, hot to the touch, began to slowly flow from the trough into a small, dug pond.
Following Xu Yun's previous instructions, Qifei then lightly and evenly sprinkled pig iron powder into the molten iron in the small pond.
The others were stirring rapidly with willow sticks.
Seeing this situation.
Xu Yun felt a little relieved.
In ancient Huaxia, refining steel and forging steel were the two most common methods of steel casting.
Taking the finished products from the Song Dynasty's Manufacturing Bureau as an example, their sulfur content is approximately 11 parts per ten thousand, or about one part per thousand.
As mentioned before.
Even a difference of just one ten-thousandth in the amount of sulfur and phosphorus in steel can have drastically different effects; they are not the same thing at all.
Modern steelmaking processes also largely use this difference as the dividing line for grades, classifying them into ordinary steel, high-grade steel, special-grade steel, special-grade peak steel, special-grade perfect steel, semi-step transcendent steel, and so on.
All in all.
Compared to 0.05% of the content of the most common modern steel, the finished steel products of the Song Dynasty were six orders of magnitude inferior.
Even compared to the finest steel products from the Manufacturing Bureau, the difference in quality would only be reduced to about 4.5 at most.
Therefore, Xu Yun, thinking that 'since the mission is to cause trouble anyway,' decided to go all out and do something big:
He combined the Bessemer steelmaking process with the crucible steelmaking process of the Late Ming Dynasty, and used the local 1956 small-capacity furnace as a template to design a two-cubic-meter reverberatory furnace.
A reverberatory furnace.
It refers to a type of chamber-type flame furnace.
The fuel burns in its combustion chamber, and the heat generated is reflected from the furnace top to the heating chamber to heat the billet.
The heat transfer method inside the furnace relies not only on the reflection of the flame, but more importantly on the radiative heat transfer through the furnace top, furnace walls and hot gases.
Therefore, there are certain requirements regarding design specifications.
Xu Yun used a brick-built inverted arch furnace bottom this time, with a thickness of about 900 mm, from bottom to top as follows:
The furnace bottom consists of a cast iron plate, a 20 mm asbestos board, a 300 mm clay brick, a 100 mm rammed earth layer, and an uppermost layer of magnesia bricks forming an inverted arch.
What?
You ask how magnesium bricks are made?
Magnesite is calcined at high temperature and then crushed to a certain particle size to become sintered magnesia.
After pressing, you can get high-quality magnesium bricks.
Considering the relatively small melt ratio and depth of the trial-produced horseshoe, Xu Yun adopted a 129° inverted arch center angle. (This should be correct; the magnesia brick is 300 mm thick. Has anyone checked the calculation?)
In this way.
The temperature inside the furnace can easily reach over 1600 degrees Celsius, or even approach 1800 degrees Celsius.
Besides the equipment...
Xu Yun also made some improvements in terms of raw materials.
For example, bituminous coal is coked in an air-isolated environment, and coke is used as fuel instead of coal.
Another example is decarburization using the method of pouring steel into a container.
Of course.
The more crucial step is yet another:
Add a pull-out bellows.
This step doesn't consume many resources or have much labor cost; it's just quite tiring.
After a while, Qifei raised his hand to Xu Yun:
"Young Master Wang, the molten iron has turned into a sponge-like consistency."
Xu Yun strode to the edge of the trough, and as soon as he got close, a scorching heat surged up from him:
"Master Qi, have you added all the iron filings?"
"It's added."
Xu Yun nodded in agreement:
"Then cut the molten iron into pieces, put them on the second layer, and introduce oxygen."
Qifei had already practiced the relevant operating procedures, so it didn't take him long to transfer the molten iron filled with pig iron filings to the second layer of the reverberatory furnace.
The temperature of the second layer of the reverberatory furnace is much lower than that of the first layer. The main purpose of this stage is not calcination, but...
Introduce oxygen.
Or to be more precise
Introduce pure oxygen.
That's right.
Pure oxygen.
This is also why Xu Yun is confident in forging steel with a lower impurity content:
As is widely known.
Producing pure oxygen is a simple task that anyone can do; surely no one can't do it?
Cough cough
Considering the extremely high temperature inside the reverberatory furnace, Xu Yun did not use water electrolysis to produce Oxygen production.
Electrolysis of water to Oxygen production oxygen is not only energy-intensive, but it also easily mixes with hydrogen gas.
Once the concentrations of hydrogen and oxygen reach a certain limit, certain Deidara-like behaviors can easily occur inside the reverberatory furnace.
Therefore, Xu Yun chose the laboratory Oxygen production method that would be the standard method used in later generations.
That is, heating potassium permanganate to collect oxygen.
First, Xu Yun found pyrolusite through Old Su's connections. It is a very common ore, and you can find a lot of it in Bianjing City.
It is then heated with potassium nitrate to produce potassium manganate.
It is then electrolyzed with an oxidizing agent in an alkaline solution.
In this way, potassium permanganate is obtained.
Clam?
You asked where potassium nitrate comes from?
Do you remember the potassium nitrate bridge made from saltpeter obtained from the Sour Plum Drink shop when preparing chlorine gas? (See Chapters 123)
So, as I said before:
The generator and electrolytic cell that Xu Yun developed were far more than just a way to show off his skills.
Then, he directed Qifei to move the copper pipes that transported oxygen to the second-floor entrance.
Although copper has a melting point of less than 1100 degrees Celsius, the temperature of the two-layer reverberatory furnace is not high to begin with.
Furthermore, since the copper pipe is only connected to the groove opening, there is no need to consider the possibility of the copper pipe melting.
"Be careful, insert it slowly. It's very sensitive. Get ready, when you're about to come out, watch carefully, don't let the water inside splash out."
The copper pipe was connected to a self-priming pump designed by Old Su. As the valve was opened, a large amount of oxygen was quickly delivered into the second floor.
This pure oxygen quickly combines with the carbon, phosphorus, and sulfur in the spongy molten steel, and after oxidation, it escapes through the vent pulled by the Brother Donkey.
In just 25 minutes, the purity of the molten steel was stretched to an extremely high level—relative to the times.
"What a pity, what a pity."
Looking at the molten steel, which had entered its final stage, Xu Yun couldn't help but shake his head slightly.
Seeing this, Wang Bing, who was standing to the side, couldn't help but ask:
"Little Wang, what are you regretting?"
Xu Yun sighed and said:
"We didn't have enough time to prepare, and we lacked the necessary technical equipment; our hardware conditions were somewhat inadequate."
Therefore, theoretically, the durability of finished steel products can only reach about fifteen times that of ordinary steel.
Wang Bing:
O_O?
Xu Yun didn't notice Wang Bing's expression; what seemed pretentious to Wang Bing was actually his true thought.
After all, if the conditions are right.
Without many steps, simply adding nickel and chromium to molten steel can easily increase its quality tenfold—that is, a difference of an order of magnitude.
Unfortunately.
Laterite nickel deposits are mainly distributed in tropical countries within 30 degrees north and south of the equator.
Although some laterite nickel deposits exist locally, they are all located in the northwest and northeast, not in the Central Plains.
For example, Longyou, Zhuzhou, and the White Mountains and Green Waters.
The latter two are not currently within the territory of the Song Dynasty. Although Longyou belongs to the Song Dynasty, it is a crucial frontier area in the war against the Western Xia.
At present, Longyou is mainly focused on defensive fortifications, and its resource development is far from reaching the level of later generations.
Therefore, Xu Yun's idea of further purification could only remain unrealized, waiting for a lucky person in later generations to discover it.
About an hour later.
He estimated that it was about time, and said to Qifei:
"Master Qi, the time has come. The rest is up to you."
Qifei nodded to him and directed the other craftsmen to take out the softened molten steel and begin forging.
Slap slap slap--
The marshmallow-like molten steel gradually began to solidify under Qifei's stirring.
Qifei sensed the heat from the resistance and poured it into a horseshoe-shaped mold.
Many people in later generations, influenced by some movies and television shows or the use of horseshoes in everyday life, believe that horseshoes are a very simple tool.
But in reality...
The horseshoes for both military and racing horses are very complex, far from being as simple and lightweight as they appear.
For example, a single horseshoe in the Olympic equestrian competition weighs 2.2 pounds, or 1.99 kilograms, and is made entirely of aluminum alloy.
The Kangaroo Museum in Brisbane also preserves an iron horseshoe from the 1956 Melbourne Olympic Games show jumping competition, weighing a hefty 3 kilograms.
Why is this thing so heavy?
Because a horseshoe assembly requires not only horseshoes, but also at least seven nails for reinforcement, plus a sheet metal piece at the top that resembles a shin guard.
With so many joints, it's not surprising that horseshoes are quite heavy.
The gaze returned to its original spot.
About 20 minutes later.
The molten iron has been poured.
Xu Yun took over from Qifei, using long-handled tweezers to hold the cast horseshoe and immerse it in water.
This is a common operation seen in TV dramas, also known as quenching.
Its main purpose is to quickly solidify and shape the iron billet, giving it a hard, solid form.
However, from the perspective of relevant professional fields...
Although quenching is a simple action, the underlying principle is quite complex.
Sizzle--
A puff of white smoke suddenly rose up.
The interior of the steel rapidly transforms into austenite, and then is rapidly cooled at a rate greater than the critical cooling rate to form metastable martensite.
The deformation also brought about a high density of dislocations, while the rapid cooling caused by supercooling resulted in a high nucleation rate for new grains, leading to grain refinement strengthening.
The external manifestations of both of these are as follows.
Quenching and shaping are complete.
In movies and TV shows, blacksmith shops are usually done after quenching, but mechanical engineering students... ahem, mechanical engineering majors should know that.
At this point, there is actually a lot of stress and brittleness inside the quenched part.
If tempering is not performed in a timely manner, deformation or even cracking may occur, leading to various problems in practice.
For example, a shovel that hasn't been tempered is likely to develop a chip after just a few digs.
Therefore, Xu Yun tempered the horseshoes again, which finally brought the forging of the horseshoes to a complete end.
Fifteen minutes later.
Xu Yun, carrying the now-cooled horseshoe in his bare hands, walked to Wang Bing and the others and handed it to the old man.
"Lord Zhong, this is a horseshoe. Please take a look."
That's right.
Hearing this surname, you, the readers, have probably already guessed it:
This man was none other than the renowned Old Zhong, the contemporary leader of the Zhong Family Army, and the military spirit of the Song Dynasty after Liu Fa's death.
The Zhong Shidao!
When Xu Yun was making contact with Wang Hou, he specifically asked Wang Bing to find out some information about Old Zhong.
It was eventually learned that Old Zhong had indeed returned to Bianjing with the Western Army.
After all, Weizhou was the core hub of this western front operation. As the prefect of Weizhou and the Yingdao Army commissioner of Weizhou, Old Zhong was responsible for the transportation of military horses, provisions, and clothing.
Now that they have achieved a major victory, there is a 70% chance that he will return to Beijing with them.
After all, although Old Zhong was not greedy for money and had high moral character, he had no bad reputation in his life except for a few defeats.
But this does not mean he has no desires or wants.
On the contrary.
As the current Longtou of the Zhong Family Army, Zhong Shidao strives for every achievement:
Anyway, it was the result of my own blood and sweat, so there's nothing to be ashamed of.
If you don't fight for the welfare of your subordinates, how can others trust you?
Later, Xu Yun used horseshoes as bait and, through a letter from Old Su, invited Old Zhong to his residence.
However, despite arriving at the residence, Old Zhong's attitude towards Xu Yun was rather lukewarm, and his face was even more sour than Old Jia's.
For example, right now.
Seeing Xu Yun, a young man with no experience, carrying a horseshoe and confidently claiming that it was ten times harder than ordinary steel, one is shocked.
Old Zhong's eyes were filled with suspicion.
After all, he was different from civil officials like Old Su.
Most soldiers are straightforward and say what they think, but they haven't dared to express it out of consideration for Old Su.
He glanced at Xu Yun a few times, then took the horse's iron hoof.
He stroked it all over, and even flicked it lightly with his index finger.
A moment later.
Old Zhong's expression froze slightly, a hint of surprise flashing across his face.
As a military commander stationed far from home year-round, his familiarity with steel had reached an astonishing level.
It's basically easy to get started.
He can determine whether it is low-grade, medium-grade, or high-grade steel by its quality, flatness, and syllables.
Based on the tactile feedback he had just received.
The horseshoe in front of me, weighing several kilograms, seems to be made of material that is almost identical to high-quality steel, with no difference in quality.
In other words
This young man in front of me seems to have some skills.
After all, he had seen the forging process of the Ordnance Bureau, and it was much slower than Xu Yun's in terms of both procedures and efficiency.
However, Old Zhong didn't expect was...
Some steels are called high-grade steel because they are only high-grade steel.
Some steels are classified as high-grade steel because, within the existing cognitive framework, this is the case.
Only high-quality steel.
After a moment's thought, Old Zhong took out a sword from his person.
This sword was a fine blade given to him by the late Emperor Zhezong of Song of Song, made from the finest steel from the fifth year of the Shaosheng era.
Let's not say it can cut through iron like mud.
It wouldn't be difficult to leave a notch in the steel axle of the chariot with at least one cut.
In several life-or-death hand-to-hand combats, Old Zhong even used it to pierce the enemy's breastplate, which was much thicker than a horseshoe.
After preparing the knives.
Old Zhong placed the horseshoe on the table, brandished his knife a few times beside it, and asked Xu Yun:
"Young man, may I try my hand at this?"
Xu Yun quickly gestured for him to proceed.
"That is indeed my wish, but I dare not ask."
Old Zhong glanced at him thoughtfully again.
If nothing unexpected happens, this young man should have some skill.
But he seems somewhat arrogant, or rather, strangely confident.
But if he can really produce high-quality steel on a large scale.
This is actually a good thing for the imperial court, especially for the Western Army.
Therefore, he hesitated for a few seconds.
He didn't use his full strength, intending to create a small opening to save face for Xu Yun.
Start.
The knife fell.
Clang--
With a clattering sound accompanied by sparks, the short knife in Old Zhong's hand...
Suddenly it split open from the edge, eventually breaking in two.