Skip to main content
  • Home
  • Library
  • Read
    • Popular
    • Charts
    • Browse
    • Categories
    • Wikis
    • Glossary
  • Request
  • Activity
  • Leaderboard
  • Help
Our Apps
  • DaoSearch
  • Narratorr
Social
  • Discord
  • Patreon
Stepping into the Unscientific
Chapter 174

To the Glorious People (Part One)

1,802 words 6 min read 2 views 1mo ago Source ​
Skip to the end of the chapter
Prev
Next

In the 21st Century.

Due to certain industry barriers, many people tend to think of engines as something high-end and sophisticated.

But in reality...

In some model aircraft circles, building one's own aircraft engine is not a rare thing; funding takes precedence over technology.

For example, making your own turbojet.

There are tons of related videos on Bilibili, and some geek websites still have some data left over.

Many amateur scientists have so many homemade engines at home that they could fill half a room.

Of course.

Some might ask, why is DIY engine building so popular?

This leads us to the root of all evil:

Kurt Schreckling.

In early 1998.

After countless failures, this engineer-level enthusiast finally succeeded in designing and operating the first turbojet engine, which also proved effective in combat.

And so.

He published a book called "Gas turbine engine for aircraft model" back then.

In his book, he published the specifications of an engine called FD3-64, which became the ancestor of all DIY engines.

Since then, the process for building a homemade engine has been largely finalized.

Just like a fishing rod.

With the development of the fishing industry, these days, the methods for setting up fishing reels, stringing lines, and tying bait are all fixed.

The only differences are the "parameter calculations" such as whether to use a baitcasting reel or a spinning reel, what line to use, whether to use five-gram or ten-gram baits, and which market to buy fish from after a no-go.

Indeed.

The industrial level of later generations was much higher than that of the Song Dynasty. For example, it was very difficult to achieve things like five-axis CNC machining centers and wire cutting.

But on the other hand...

As mentioned before, Xu Yun's goals were realistic; he wasn't aiming for instant success.

First, the engine he designed will not be ready for mass production immediately.

Secondly, this aircraft was intended for use in the coronation ceremony, and its lifespan was only a few dozen hours.

There is no need to consider long-term durability, long-term deformation, or universally applicable processes and production lines.

With Xiao Zhao's support, it's not a pipe dream to have the entire nation's resources mobilized to develop an engine.

As for the engine that Xu Yun is going to design this time...

It is a rotary engine. (Note: I got confused when calculating the thrust yesterday and accidentally wrote down the bypass ratio, which led some friends to think that it was going to be a turbofan engine.)

Rotary cylinder engines, also known as radial engines, are actually a type of piston engine.

However, unlike the cylinder block of an inline piston engine.

In a rotary piston engine, the cylinder block rotates around the output shaft, while in a straight piston engine, the cylinder block is fixed relative to the output shaft.

Xu Yun designed the engine template for the CJ-6, which is a radially arranged air-cooled 9-cylinder engine.

However, it has been optimized in some aspects, and is superior to pulse jet engines in all aspects, such as increasing the curvature of the impeller.

The specific parameters are as follows:

Compression ratio: 6.1 ± 0.1.

Main connecting rod strength ratio: 1.0032

Operating speed: 2370rpm

Piston stroke: 130mm

Ignition advance angle: 29±2°

Maximum gas pressure: 57.2 kg/cm².

Linkage length: 235mm

Curved neck rotation radius: 63mm

Piston diameter: 105mm.

Crankshaft deflection angle at maximum pressure: 13° (assuming the time from the start of combustion gas explosion to its maximum value is 4/1000, the first stage accounts for 12%, the pressure increase accounts for 20%, and the other dead point is 11°, I took the larger value. By the way, these are the parameters of an engine I manually tested 9 years ago, and they have been tested in actual combat.)

Of course.

Parameters are just parameters; they are only a small part of the overall machine design process.

There are also some data points that Xu Yun couldn't have compiled alone.

Examples include cross-sectional thrust and reflected wave pressure from a vertical plate.

That's why.

That's why he asked Xiao Zhao for help from Old Jia and others.

Scientific research is never a solitary endeavor.

One week later, on a certain night.

On an open space in the Manufacturing Bureau.

At this moment, in the center of the open space stood a furnace resembling an iron smelting furnace, about four meters high.

A pipe was connected to the side of the blast furnace, and on the pipe was the self-priming pump that Old Su had invented himself.

Beside the blast furnace.

Xu Yun first glanced at the sky, and after confirming that there was no sign of rain, he turned to Qifei and asked:

"Master Qi, how's the equipment preparation going?"

Qifei wiped the sweat from his brow, caught his breath, and said:

"Young Master Wang, please rest assured. I had people check it several times yesterday and even tried starting it up once. Everything is working normally."

Xu Yun glanced at the blast furnace again and said:

"That's good, Master Qi. This equipment is the core of our research and development this time. It's crucial to the team, the most important thing."

"Therefore, I'm grateful for your hard work these past few days; please make sure there are no mistakes."

Upon hearing this, Qifei immediately puffed out his chest, full of energy, and said:

"Don't worry, I'll stay here for the next few days and won't go anywhere else. I guarantee I'll complete the mission!"

Xu Yun nodded in relief.

In this construction process, two identically named stages are indispensable:

First, a donkey.

The second is aluminum.

That's right.

Aluminum.

Aluminum and aluminum alloys are currently the most widely used materials in aircraft manufacturing.

As is widely known.

When a small amount of Cu and Mg are added to ordinary aluminum, a type of MgCu2 micrograins called the Laves phase will form inside the aluminum.

Its dispersion in aluminum can increase the hardness and reduce the ductility of the aluminum material, forming so-called "hard aluminum", which is an important material for manufacturing aircraft fuselages and engine casings.

Of course.

From a convenience standpoint, an engine made of cast iron could actually be used as a makeshift solution.

After all, cast iron engines were quite common in later generations, and their cost would be lower.

However, considering the limitations of the Song Dynasty craftsmanship, the performance of the machine was already significantly reduced, reaching a very rudimentary level.

Therefore, considering performance, Xu Yun still plans to use a combination of aluminum and ceramics in the design to enhance stability.

But this raises a problem:

Aluminum is an extremely rare metal in ancient times, and it is very difficult to find elemental aluminum in nature.

According to normal history.

It wasn't until 1827 that the German scientist Wöhler successfully produced metallic aluminum by heating potassium and anhydrous aluminum chloride together.

Later generations mainly produced aluminum through electrolysis, specifically the cryolite-alumina molten salt electrolysis method.

Molten cryolite is the solvent, and alumina is the solute.

Carbon material is used as the anode, and molten aluminum is used as the cathode.

Metallic aluminum can be produced at 950℃-970℃ by passing a strong direct current through it.

However, this method requires a large amount of direct current and a series of associated processes.

The generator that Xu Yun could create by hand simply couldn't achieve that effect.

Therefore, after much consideration, he finally decided to produce aluminum in another way.

This process was developed based on copper and iron smelting and requires copper, carbon, and bauxite.

Its main chemical reaction formula is:

At high temperatures, 3Cu + Al₂O₃ = 3CuO + 2Al.

In a closed environment, CuO + C = Cu + CO.

At this point, some students might be wondering.

That's not right.

Isn't this a reaction equation that contradicts modern chemical theory?

Because aluminum is far more chemically reactive than copper, it is impossible for aluminum to lose an oxygen atom and donate an oxygen atom to copper. Therefore, this reaction formula is completely wrong.

In reality...

This reaction has a prerequisite:

In a sealed, high-temperature resistant container free of free oxygen, copper and Al2O3 are placed inside and heated until their temperature rises to the boiling point of aluminum.

At this point, a small amount of Al2O3 will instantly lose oxygen and turn into aluminum vapor, which will then escape from the surface of the molten copper and aluminum oxide mixture.

At this point, the copper, which is in a molten state, will have to accept oxygen and turn into copper oxide.

Therefore, if the small channel on the sealed container can be opened in time, allowing the aluminum vapor to flow into another sealed container without oxygen, and then cooled, elemental aluminum can be obtained.

Considering that aluminum has a boiling point of 2467℃, far exceeding the 1600℃ of even a blast furnace for ironmaking, Xu Yun has also used ethanol to produce acetylene these days.

See, the alcohol and hydrochloric acid from the beginning have come in handy again.

Let's return to reality.

Once everything is ready...

Xu Yun looked at Qifei and said:

"Master Qi, let's begin."

Qifei nodded to him, then walked to the stove and lit a fire at the low arched entrance.

The oxygen supplied for acetylene combustion is still obtained from the industrial production of potassium permanganate by heating, just as it is in iron smelting.

Acetylene can burn at 3600 degrees Celsius in oxygen, so aluminum vapor was quickly produced in the equipment.

Aluminum vapor rises into the channel under the guidance of the self-priming pump invented by Old Su, while ice blocks are placed around the channel to cool it down.

Don't ask where the ice came from; do you still remember the Sour Plum Drink from back then?

About half an hour later.

As the reaction proceeded, another container produced something extremely rare for this era.

Aluminum.

However, the aluminum metal available now is only a small lump, which is far from meeting Xu Yun's requirements.

Therefore, after handing the scene over to Qifei.

Xu Yun then took his leave and went to another courtyard of the Manufacturing Bureau.

Yesterday someone said that hand-building a generator is ridiculous, but the thing is, I've actually done it!

I've explained the principles and the material preparation process so clearly. You can say I'm talking nonsense, but at least explain where the nonsense is.

Some people immediately claim the plot is nonsense, but when asked to point out any problems, they can't. Does that mean anything beyond their understanding is nonsense?

The two reader groups together have over a thousand readers, including four or five Doctorate and twenty or thirty graduate students, who often message me privately to discuss various issues.

I wouldn't dare say my book is exceptionally well-written, but I can at least guarantee that the knowledge I present is accurate; otherwise, it wouldn't have achieved its current success.

Speaking of sales figures, I'd like to mention that this book has already reached 6,500 average daily subscriptions, an increase of 1,000 this month!

End of Chapter
Prev
NovelSummaries
Next

Explore the wiki

Xu Yun

Comments

No comments yet.
AboutStatsAPIChangelogStatusContactPrivacyTermsDMCA
© 2026 RandomTranslator·v3.26·RSS