The Yongle Encyclopedia Appears in the World!!! (Part 2)
"The excavator has already dug up to the top floor of the rear hall!"
Upon hearing this...
Inside the tent that served as a temporary command post.
The conversation immediately fell silent.
Then Jiang Chenggu and Weng Tong exchanged a glance. Jiang Chenggu nodded to Weng Tong, stepped forward, and asked the newcomer:
"Xiao Lin, how's the excavation going? Has the top floor of the rear hall been damaged?"
The civil engineering guy named Xiaolin quickly shook his head, gesturing with his hands in front of his chest to indicate a height, looking like Xiong Ba gathering his strength to unleash his Three-Part Returning to Yuan Qi:
"Director Jiang, don't worry, we've prepared an excavation plan beforehand."
"The excavator stopped digging when it was still 40 centimeters away from the top of the rear hall; the equipment did not touch the main body of the rear hall."
"A few minutes ago, we carefully drilled downwards with drilling equipment and finally confirmed that the rear hall of the Ninth Hall underground palace does indeed exist below."
"Academician Zhang is currently discussing the next steps of the construction plan with several Engineer Gao. In about half an hour, we will begin the next stage of excavation for the rear hall."
Jiang Chenggu then nodded slightly:
"So that's how it is."
Although Jiang Chenggu came from the General Office of the State Council, since he was selected by his superiors as the chief commander of the Yongling excavation project, he was naturally not completely ignorant of archaeological engineering.
In fact.
Jiang Chenggu graduated from Huaxia University of Mining and Technology. Once he has accumulated enough seniority in the General Office, the unit he will be assigned to will most likely be related to mining or various engineering projects.
Therefore, he understood very well.
Although the Sany 205 is a medium-sized excavator with a large tonnage, it is quite rough and cumbersome to operate.
But for those experienced drivers who can light a lighter on an egg while driving an excavator and still keep the egg from breaking, digging precisely 40 centimeters above the back of the egg is not a difficult task at all.
After all, it's the national team playing today.
Jiang Chenggu then glanced outside the tent, confirming that much of the equipment inside the Foundation pit had indeed stopped operating, and said to Xiao Lin:
"In that case, Kobayashi, lead the way, let's go to the scene and take a look."
Xiao Lin's expression straightened:
"Clear!"
Then, under Kobayashi's guidance...
The group quickly left the command post tent, walked more than 100 meters forward, and entered the Foundation pit enclosed by barriers.
The top of this Foundation pit measures approximately 60 x 60 meters, with a total area of just over 3,000 square meters, slightly larger than half a football field.
The Foundation pit was divided into two smaller layers, with a total depth of nearly thirty meters. Originally, the pit was divided into four layers, but two of them were expanded after the equipment entered the next layer, leaving only the support, partitions, and water-stop curtain.
There are two ways to descend into the Foundation pit. One is to go down via the side slope, which also serves as the access route for engineering equipment.
Another option is to take a simple elevator, which is one of those large, sturdy iron frames that are drafty from all sides.
Xu Yun and his group naturally chose the latter.
After entering the elevator in batches, everyone successfully descended to the bottom of the pit.
The area at the bottom of the pit was about 400 square meters, much larger than Xu Yun had expected. The soil on the ground was mostly dark red and looked somewhat damp.
As soon as I stepped out of the elevator...
Then everyone saw Zhang Zi'ang wearing a hard hat, standing on the ground not far away, discussing something with several men who looked like engineers.
I don't know if it's just the way the civil engineering guys are, but everyone's body language was very expressive, and they seemed to be having a very deep conversation.
Some of them would sometimes spread their palms out in a diving posture, and other times raise their hands high with their fingers spread, as if they wanted to hit the ground.
Occasionally, someone would squat down, grab a handful of soil, and say something while holding it in their hand.
It's obvious.
They are discussing the next steps.
"Academician Zhang!"
Jiang Chenggu led the group forward quickly, first nodding to the engineers he had met in recent days, then turning to Zhang Zi'ang and asking:
"Academician Zhang, has the next phase of the excavation plan been finalized?"
Zhang Zi'ang nodded, stretched out his hand, and pointed to another rectangular area enclosed by police tape, saying:
"Director Jiang, look."
"Below that area lies the rear hall of the underground palace, the secret chamber where the coffins of the Emperor Jiajing and his three empresses were placed. The cordon was set up according to the layout of the rear hall."
"Our next step is this: first, we will use manual methods and hydraulic picks to remove all the soil above the underground palace of the rear hall, and then determine the location of the entire rear hall in the actual environment."
"In addition to dealing with the upper soil layer, the construction team continued to excavate and clear the left, right, and rear sides of the rear hall."
"After excavating to the outer walls of the main structure on three sides, we began drilling and pumping out the water to remove the accumulated water from the rear hall as quickly as possible."
When he said this...
Zhang Zi'ang even stomped on the soil beneath his feet to cooperate.
For those who don't have a direct understanding of Zhang Zi'ang's description, try imagining one word:
Concave.
The shape of the word [concave] is almost the top view of a foundation pit.
The left, bottom, and right sides of the top view are the left, right, and rear sides mentioned by Zhang Zi'ang, and the position at the top with a missing horizontal line is the main gate of the rear hall.
Zhang Zi'ang's plan was to excavate downwards from the left, right, and rear sides of the rear hall, eventually exposing the top, left, right, and rear sides of the rear hall.
If you still don't understand, try recalling the bed you sleep in.
The headboard of the bed against the wall is the entrance to the rear hall. The four sides of the rear hall are the top, left, right, and back, which are in contact with the air.
Right now, only the bed surface is exposed to the air; what Zhang Zi'ang needs to do is dig out the other three sides.
Zhang Zi'ang then paused, and after Xu Yun and the others had understood the diagram, he continued:
"Once all four sides have been cleared and the water inside the tomb has been pumped out, we will proceed with the final cutting and lifting."
"Now that we've reached this stage, Director Jiang, old man, we'll need your help and preparation in terms of technical aspects."
Jiang Chenggu and Weng Tong Tongqi nodded in unison:
"No problem."
As key participants in the project, they were well aware of the technical means Zhang Zi'ang was referring to—the protection of cultural relics inside the rear hall.
To be precise, it should be...
The preservation of artifacts and remains inside the four imperial coffins.
After all, it is different from the integrated bronze hall that houses the Yongle Encyclopedia.
Although the walls, floors, and ceilings of the apse were made of marble-clad 'tiles,' they appeared much more solid than ordinary soil.
However, they are not ultimately cast in one piece.
Given the hundreds of years of waterlogging, no one knows whether the rear hall might suddenly collapse during the lifting process—the probability is, frankly, not high, but it's not zero either.
Therefore, out of consideration for the sake of prudence...
Weng Tong and his team had made a series of contingency plans in advance to prevent the imperial coffin from being weathered or damaged in the event of a low-probability incident.
After all, archaeologists are all seasoned veterans.
All in all.
After the plan was finalized.
Zhang Zi'ang then led the construction team to get to work.
To be honest.
40 centimeters of soil is hardly thick.
In real life, a 24-inch monitor is about 30 centimeters tall, and 40 centimeters is at most the size of a Coca-Cola bottle placed on top of the monitor.
But it's not that thin; digging a hole is not as easy as many people think—even if there aren't many stones in the soil.
Therefore, in this stage, the first tool used is not a shovel, but a small hydraulic pick.
Beep beep beep--
Seven or eight civil engineers were seen using hydraulic picks, similar to soil turners, to loosen the soil on the ground, as if they were plowing.
These men were also carrying small buckets that looked like pesticide boxes on their backs. There was a tube inside the bucket that connected to a hydraulic pick, and the two seemed to be a single module.
Seeing this situation.
A hint of curiosity flashed in Xu Yun's eyes, and he asked Weng Tong:
"Uncle Weng, what are those buckets behind those operators for?"
Following Xu Yun's pointing finger, Weng Tong glanced at the object a few times and simply said "Oh."
"That's a mixture of anionic Polyacrylamide and polyoxyethylene dehydrated polyol stearate."
"Polyacrylamide?"
Xu Yun didn't hear clearly, or rather, didn't understand the substance Weng Tong sentence, but he did know what Polyacrylamide was:
You mean soil loosening agent?
Weng Tong nodded, thought for a moment, and explained:
"It falls under the category of soil loosening agents, but it's much more efficient than agricultural ones. It's a liquid agent specifically developed for archaeological excavation."
"This liquid agent has strong penetrating power, and its soil loosening efficiency is approximately 1.5m/15g/6.8min."
"These things are frequently seen in the development of domestic historical sites, especially stone sites. However, they are not allowed in places like Sanxingdui —after all, there are too many artifacts in the soil."
Xu Yun then understood.
Perhaps this is what industry barriers are all about.
What Weng Tong took for granted seemed quite strange to Xu Yun, an outsider.
About twenty minutes later.
The soil has been loosened.
At this point, it's time for the artificial intelligence team to make their appearance.
Since this part wasn't very difficult, even newcomers like Xu Yun, Academician Pan, and Lu Chaoyang, who had little civil engineering experience, were allowed to carry shovels and participate in the "shovel-wielding class."
Xu Yun drank three bowls of water while digging, so that should count as "three bowls of water a day for plowing," right?
That's all.
As time went by, and with the efforts of hundreds of people on the construction site, the four sides of the rear hall gradually revealed their true appearance.
Four hours later.
A longitudinal milling machine arrived at the 'neck' of the rear hall.
The wheels of the milling robot arm are covered with irregular nails, somewhat resembling a mace twisted into a circle, making it look extremely ferocious.
Of course.
It's easy to tell from this rough art style that the equipment couldn't have been used to cut a marble channel—even though the marble channel was a meter thick.
This longitudinal milling machine is mainly used to correct the soil layer above the cutting area, so that the subsequent 'guillotine' cutter can perform better.
At the same time.
Holes were also drilled into the left, right, and rear sides of the rear hall.
Then three thick black pipes were inserted into the three drill holes respectively.
After a while...
With the action of the air pump, water quickly gushed out of the borehole.
With the help of pressure equipment, the accumulated water was brought to the surface and, after passing through a filter screen to prevent the cultural relics from being accidentally sucked in, was discharged into a pre-dug pond.
After purification, the stagnant water will be discharged into a nearby stream.
Those who have watched the Huazhong Agricultural University Brothers' videos should know this.
Don't be fooled by the seemingly large water output of a water pump; it's incredibly powerful, bubbling and gurgling.
However, it would take at least several hours or even most of a day to completely drain the water from an ordinary fishpond.
The rear hall of Yongling Mausoleum is, in a sense, a large fishpond seven meters deep.
Therefore, although pumping water from the rear hall was a grand undertaking, it still took quite a bit of time.
According to Weng Tong's introduction.
The closest archaeological example to the scale of a rear hall being pumped out is probably the tomb of Prince Liangzhuang.
In April 2001, the Jingmen Archaeological Team conducted an archaeological excavation of the Liangzhuang King's Tomb located in Dahong Village, Changtan Town.
Prince Liangzhuang was the grandson of Zhu Di) of the Ming Dynasty. He was born in 1411 and was enfeoffed as Prince Liang at the age of 14.
He was granted a fiefdom in Anlu Prefecture, Huguang Province, and took office at the age of 18.
He died of illness at the age of 30 and was posthumously honored as King Zhuang.
Because he had no sons, his fiefdom was abolished after his death.
Besides dying young, King Liangzhuang's tomb was also quite unique—it lacked a drainage system and was built in a location where Groundwater was accessible.
Later generations have said that it was meant to express the idea of "not giving up until reaching the Yellow Springs," but whether it's true or not, only someone who was a classmate of Prince Liangzhuang in a past life would know.
When the archaeological team opened the underground palace, the water inside the tomb was 3 meters deep, half the depth of the 7-meter-deep water in the rear hall of the Jiajing underground palace.
However, the area of the Liangzhuang King's underground palace is more than twice that of the rear hall, so the volume of water inside the tomb is about the same.
It took the archaeological team 10 days to pump out the water, after which they made a huge discovery inside the tomb:
The burial goods numbered over 5,340 pieces, with 16 kg of gold, 13 kg of silver, and 14 kg of jade used, truly making Wealthy Enough to Rival a Nation.
However, the archaeological team only had one water pump at the time, and its power was different from the pumps that Zhang Zi'ang and his team are currently equipped with.
Therefore, although pumping water from the rear palace of the Jiajing Emperor was difficult, it did not take as long as ten days.
Wait until the next morning.
The water that had accumulated in the rear hall was then completely pumped out.
Three small lampstands were also pumped out along with the floodwater; they appeared to be ornaments that had been submerged in the water for a long time and had decayed.
About an hour after the floodwater was pumped out.
The longitudinal milling machine also perfectly optimized the soil layer at the 'neck' of the structure.
"."
Seeing this situation.
On the open ground to the right of the rear hall.
Zhang Zi'ang, who had been waiting there, glanced at a middle-aged man with an ordinary face beside him and politely gestured for him to proceed.
"Master Huang, I'm counting on you from now on."
Master Huang seemed to be a man of few words. Upon hearing this, he simply nodded blankly and walked to a workbench to sit down.
He quickly tapped away on the control panel for a while, inputting some commands.
Less than a moment later.
Sizzle.
A mechanical arm suddenly extended from a black square device, roughly two meters in length, width, and height, placed on the top of the rear hall.
This robotic arm is about ten centimeters thick, also black, and cylindrical in shape, thicker at the back and thinner at the front.
The robotic arm slowly moved, eventually extending to the edge of the soil layer excavated by the longitudinal milling machine.
Then very quickly.
The closed metal seal at the front snapped open to both sides with a "click," and a device resembling a spinning top, with a long metal strip resembling a cigarette attached to the bottom, slowly emerged.
A while later.
As Master Huang pressed a certain key.
Suddenly, a section of the gyroscope shot out from the long strip beneath it.
Water column.
Normally speaking...
Even when high-pressure water jets hit the marble structure of the rear hall, it is difficult to damage the marble in the slightest.
Surprisingly, however...
The thin jet of water hit the marble 'neck' of the rear hall.
It cut a deep slit in the marble with the ease of a cleaver cutting tofu!
Seeing this situation.
Whether it was Xu Yun, Zhang Zi'ang, or Weng Tong, everyone's expression remained calm.
After all, this is an ultra-high pressure water jet.
Ultra-high pressure water jet, or simply water jet, is also called water cutting.
It mainly consists of a high-pressure pump, a CNC machining platform, and a jet cutting head, with the high-pressure pump being the main component for pressurizing the water flow.
Ordinary water can be pressurized to 4000 bar by a high-pressure pump and then sprayed out through a tiny nozzle made of rubies or sapphires set in metal.
Then, garnet or corundum is added as an abrasive, and the resulting 'water jet' can reach speeds of up to 6 to 8 times the speed of sound.
This type of high-pressure water jet can easily cut through various types of stone or steel plates, making it a common processing method in current industrial production.
However, under normal circumstances...
Waterjet cutting is commonly used for processing precision materials, which is commonly referred to as indoor small-part production.
However, infrequent use does not mean unusable. China Construction Seventh Engineering Bureau had already produced waterjet cutting equipment for outdoor architectural scenarios in 2019.
The standard depth of indoor waterjet cutting is generally between 15 and 20 centimeters, and some can reach 30 centimeters. Without considering wear and tear costs, it can be increased to 60 centimeters in a short period of time.
The water jet system developed by China Construction Seventh Engineering Bureau has been optimized by the Chinese Academy of Engineering, which minimizes the dispersion of the water jet as the distance increases, achieving an effective cutting depth of 1.5 meters. Although there is no concrete evidence, Xu Yun believes that given China Construction Seventh Engineering Bureau's track record, the actual maximum cutting depth of this device should be over two meters.
While a depth of 1.5 meters is not enough to completely cut through the rear hall, it can cover the uppermost area of the rear hall.
If a regular circular saw or frame saw is used in this area, the marble is prone to cracking due to the resonance of the linear expansion coefficient.
After all, marble has a lot of mineral particles, and the piece used to make the door panels in the back hall has been soaked in water for so long, who knows how much it has changed.
Just like cutting vegetables in everyday life, the first cut is the most important.
Twenty minutes later.
The waterjet cutting is complete.
At this point, the rest is quite simple.
Zhang Zi'ang quickly sent people to move the waterjet equipment and replace it with a steel saw.
Steel shot saws are a typical example of frame saws, while diamond saws are another type of frame saw.
Compared to diamond saws, steel shot saws are more efficient and can cut larger slabs.
However, its disadvantages are high wear and tear, and the need to add diamond and lime during cutting, resulting in relatively high pollution.
Fortunately, there weren't many environmental activists around today, so no one was going to nag about "how dare you."
Another hour or so passed.
The diamond saw has finished cutting.
The entire rear hall was completely transformed into a 'sugar cube' that could be moved at any time.
Then Zhang Zi'ang glanced at the top of the Foundation pit, adjusted his glasses, and asked his assistant:
"Xiaolin, have the load-bearing panels been installed?"
Kobayashi, who looked to be in his fifties, quickly nodded:
"Report: The load-bearing plate has been installed!"
"Has the torque coefficient been calibrated?"
"It's been proofread three times already. This is the proofreading responsibility agreement, and all responsible parties have signed it!"
"What about anchoring?"
"It's all fine now."
Seeing this, Zhang Zi'ang took a deep breath and gave the order:
"In that case, ZAT18000H, obey my command!"
"Three"
"Two"
"One"
"Start lifting!"
Note:
Esophageal achalasia, non-atrophic gastritis with erosion in the stomach—not a particularly serious, but still troublesome condition.
I'm doing a 24-hour ECG tonight, and I'll be taking the day off tomorrow—I know what you all want to say, but even if I take the day off, I only need to post 6800 words a day, since I already had a solid foundation from posting 10,000 words a day for ten days this month.