Skip to main content
  • Home
  • Library
  • Read
    • Popular
    • Charts
    • Browse
    • Categories
    • Wikis
    • Glossary
  • Request
  • Activity
  • Leaderboard
  • Help
Our Apps
  • DaoSearch
  • Narratorr
Social
  • Discord
  • Patreon
Galactic Industrial Overlord
Chapter 297

Problems Arise

1,100 words 4 min read 1 view 2mo ago Source ​
Skip to the end of the chapter
Prev
Next

With each report, Zhang Yi and Xiang Jun Cai in the monitoring room were very happy. Although this was only the beginning of the test drive and there would be even more rigorous test drives to come, it was still a good start.

Moreover, the test start was normal, which also shows that there are no problems with the design and assembly of this engine.

"Increase the water and electricity output to put the engine into cruising mode," Xiang Jun Cai commanded.

Due to the characteristics of Pulse Engine, the testing procedure is much simpler than that of ordinary Turbojet Engine. Ordinary Turbojet Engine require starting, a mock test, and then ignition to enter the actual working state during testing. However, pulse engines do not require this; they only need to be ignited directly to enter the working state. However, the engine of Zhang Yi's Seven Color Stone Group uses an ionization plus pulse mode, so electrical power must be input first to activate the Magnetic Confinement Device and the Ionization Device before ignition.

Their engine uses high voltage to generate ionization, which decomposes water into hydrogen and oxygen, and then the hydrogen and oxygen are burned and exploded at the high temperature generated by ionization to obtain power.

Upon hearing Xiang Jun Cai's order, the Test Operator pressed the button to increase the water and electricity output. The engine sound gradually increased, and as the water and electricity output increased, the engine sound gradually grew louder, eventually emitting a series of sharp and steady sounds. The deafening sound could be heard in the monitoring room where Zhang Yi and the others were.

After the engine had been running in cruise mode for nearly half an hour, Old Xiang. Xiang loudly ordered, "All personnel, report the engine data."

The Magnetic Confinement Device is working properly, and the Combustion Chamber temperature is normal.

The Ionization Device is working properly, and water decomposition is normal.

The Tail Nozzle temperature and the exhaust flame temperature are normal.

Hearing the pleasant reports, everyone in the monitoring room was in a good mood, as it meant that the engine's design, structure, and materials were not in any major problems during cruise operation.

In fact, even without the reports from these staff members, everyone could clearly see the engine's data and working status from the real-time virtual engine on the virtual platform.

After the engine had been running for nearly an hour, the first test run of the engine was coming to an end.

Of course, the testing of an Aero Engine involves many procedures, but this is not the engine's maximum operating condition, which is the true test of the engine.

After all, the engine's maximum power output puts all its components and structure to the most extreme test.

If it were a regular Turbojet Engine, one of the key components, which is also one of the heat-bearing components, would be subjected to the greatest test. Although Zhang Yi's engine does not have a rotor, the high temperature and high pressure environment that the Combustion Chamber endures is no less than that of a regular Turbojet Engine rotor.

It's important to understand that the core temperature of a typical Turbojet Engine is only around 2,000 degrees Celsius, but the core temperature of this engine's Combustion Chamber reaches over 6,000 degrees Celsius, and even the outer temperature reaches 4,000 to 5,000 degrees Celsius. Moreover, the pressure during the combustion and explosion of hydrogen and oxygen in the Combustion Chamber is enormous, which poses a tremendous challenge to the Combustion Chamber materials.

Even though their engine now has Magnetic Confinement Device added Combustion Chamber, so that the hydrogen and oxygen in the Combustion Chamber do not actually touch the inner wall of the Combustion Chamber, the temperature of the Combustion Chamber material has already reached more than 1,500 degrees according to the data displayed on the virtual engine.

After completing a series of test runs, Zhang Yi felt a little nervous. The real test for the engine had only just begun. He knew that the temperature of the engine Combustion Chamber wall had already reached over 1,500 degrees Celsius during cruising.

Now, the engine is about to enter its highest power output state. The core temperature inside the engine Combustion Chamber will reach more than 6,000 degrees Celsius, and the external temperature will reach more than 4,000 degrees Celsius. At the same time, the entire engine will generate tens of tons of thrust, and the test it will face is unimaginable.

At this moment, even Xiang Jun Cai, the chief designer of this engine, felt a little nervous. Although Xiang Jun Cai was in charge of Aerospace Engine design in his own universe, he had also designed many excellent engines in his own civilization.

However, this is based on the technological level of their civilization, and the technology of humans in this world is still far behind that of his original civilization. Although he has great confidence in the engine he designed, he is still inevitably a little nervous.

He glanced at Zhang Yi, who nodded at Zhang Yi. Seeing this, he said, "Start the engine at maximum operating speed."

Following his command, the Test Operator pressed another switch and pushed the engine's water-electric actuator to its limit. The engine's whistling sound became even sharper, and a series of instruments in the monitoring room gradually changed. All the engine's data and numbers jumped, and the engine's thrust and operating status data continued to climb.

In the entire monitoring room, everyone was quietly watching the virtual engine on the virtual display screen; no one spoke.

As the engine data climbed, everyone's hearts tightened, fearing something unexpected might happen. However, the more they feared, the more likely something unexpected would occur. Suddenly, a red dot appeared on the Combustion Chamber shell of the virtual engine on the virtual display screen, and it was gradually expanding. At the same time, everyone in the monitoring room heard a noticeable change in the sound of the engine.

As the chief designer of this engine, Xiang Jun Cai was even more so. He knew this engine best and was very clear about its performance, so his expression changed drastically.

He immediately ordered the Test Operator, "Stop the car!"

Following his command, the Test Operator dared not slack off and immediately turned off the stop button. Because this was a Pulse Engine, it stopped immediately after the fuel input stopped, unlike Turbojet Engine, which would continue to run for a few minutes after stopping.

After the engine on the test bench stopped working, the monitoring room remained quiet, and everyone's expressions were very solemn.

After all, everyone was upset when the engine test went wrong, especially the top students like Xiang Jun Cai who designed the engine, which was the result of nearly a month of hard work.

End of Chapter
Prev
NovelSummaries
Next

Explore the wiki

Seven Color Stone Group

Comments

No comments yet.
AboutStatsAPIChangelogStatusContactPrivacyTermsDMCA
© 2026 RandomTranslator·v3.26·RSS