Zhang Yi was inside the Test Workshop at the time, was unaware of the employees' situation. Even if he had known, he wouldn't have cared, because he was more anxious than the employees outside.
After Zhang Yi discovered the charred wire, Xiang Jun Cai and the other top students began to check the wiring of the entire engine. They were shocked to find that many of the engine's wires were charred, and some had even melted.
Upon seeing these electrical wires, Xiang Jun Cai turned to Zhang Yi and said, "Boss, we've identified the root cause of the engine's problem. It's a problem with the engine's electrical wiring. When this engine was designed, in order to save on costs, the materials used for many of the wiring were just ordinary Room-Temperature Superconducting Material, not High-Temperature Superconducting Material."
Furthermore, rigorous calculations were performed during the design phase to cool the temperature around the engine through airflow during high-speed flight. However, they forgot that during engine testing, there was no rapidly flowing air around the engine, making it impossible to cool the temperature around it.
Therefore, during engine cruising, the temperature around the engine is not high enough to melt ordinary copper, so the current flows normally and the Magnetic Confinement Device works normally. However, when the engine reaches its maximum operating conditions, the temperature around the engine rises drastically, directly causing the temperature of these ordinary copper wires to rise sharply as well. Combined with the temperature generated by the current flowing through them, this directly leads to the wires melting due to the high temperature.
After hearing Xiang Jun Cai's words, Zhang Yi was speechless. You have to know that their Seven Color Stone Group has a variety of High-Temperature Superconducting Material. In order to save a little bit of cost, they used room temperature superconducting materials, which directly led to the failure of this test.
"Old Xiang, the Combustion Chamber of this engine has been burned through. Can this engine still be used? After all, this engine is different from ordinary Aero Engine. I think the engine body and the Combustion Chamber are connected, right? And these materials are not ordinary materials either. They are extremely high-temperature resistant materials, so welding is impossible, right?" Zhang Yi said.
"Boss! Don't worry about that. When we manufactured it, we didn't just make one, but five, just to prevent such a situation from occurring. Also, the Combustion Chamber of this engine and other parts of the engine body are not integrated, but modularized. It's just that you can't see it now. If needed, the Combustion Chamber can still be replaced."
After saying that, Xiang Juncai instructed an Intermediate Scholar to bring over another spare engine from the workshop and replace all the wiring on the engine with Ultra-High Temperature Superconducting Material. This way, there would be no need to worry about the wiring burning out during engine testing.
Soon, this top student and several others pushed a spare engine out of a workshop on the Test Platform. Together with these top students, they replaced all the wires on the engine with Ultra-High Temperature Superconducting Material before pushing the engine onto the Test Platform and securing it for another test.
However, before the test drive, Xiang Jun Cai and his team conducted several final checks on the engine, and only started it again after confirming that there were no problems.
As the engine's sharp sound rang out inside the Test Workshop, the employees who had been anxiously waiting outside finally felt relieved, because they knew that the engine's sound meant the previous malfunction had been resolved.
After the second test drive, Zhang Yi immediately instructed Xiang Jun Cai and his team to turn the engine's output power to maximum, and this continued for more than five hours until 4:00 PM when the test drive finally ended.
During this five-hour test run, after all the wiring on the engine was replaced with Ultra-High Temperature Superconducting Material, no further unexpected situations occurred, and all test items were perfect.
"Old Xiang, our first test run today was a complete success. However, before this engine can be put into service, it will need to undergo many more test runs. Moreover, there will be more test items and the test difficulty will be higher in the future. I wonder if you have confidence in this engine, Mr. Xiang?" Zhang Yi asked.
"Don't worry, Director Zhang! Although there was a slight mishap during today's test drive, we still have enough confidence in this engine," Xiang Jun Cai said.
"That's good. Old Xiang, I have faith in your abilities. This engine won't experience the same problems as today during future tests." After saying that, he loudly announced to everyone in the workshop, "I hereby declare the test of this New Aero Engine a complete success!"
The entire workshop instantly became a sea of joy. At the same time, just as Zhang Yi announced the successful completion of the test run, Xiao Qi, the artificial intelligence computer of the Seven Color Stone Group, broadcast his words to the entire base, making everyone in the base aware of the success of the test run.
Suddenly, everyone in the base became extremely excited, especially the ordinary people. They shouted and jumped, and many employees even hugged each other excitedly.
The success of this test run marks the completion of their first Aero Engine development since arriving at this base.
Right after Zhang Yi announced the successful test drive, a grand celebration banquet was held at the base that evening. The next morning, the engine, which had just undergone one test drive, was transported from the Test Platform back to the Assembly Workshop, because they were going to disassemble the engine next.
Although the structure and principle of this engine are very different from those of Turbojet Engine, like ordinary Turbojet Engine, after a test run, all Fang Jin thoroughly inspected to see how the various components are in condition and whether any changes have occurred.
If there are any problems, then Xiang Jun Cai and his team need to analyze these problems, find out the root cause, and solve them.
After all, this engine was only the first batch designed and manufactured by Xiang Jun Cai and his team, and these few engines were just prototypes.
The purpose of manufacturing a demonstrator is, of course, to verify whether there are any problems with the assembly, materials, processes, thrust, and other aspects of this engine. For example, the wiring problem on this engine was a very big safety hazard. If it had not been tested and mass-produced and installed on the aircraft immediately, it would have been very likely to cause the wiring to fuse due to overheating, ultimately leading to the destruction of the aircraft and loss of life.