When Luca asked the question, Haro did not answer verbally this time.
Only a pair of beady eyes kept blinking.
Immediately afterward, a data stream swept across the computer screen in front of Luca, and a new screen appeared.
It is displayed on each of them.
E-Carbon Armor, Haro Robot, Haro Repair Assist Mecha, Gundam Pilot Space Suit, and a series of other props.
However, Luca's vision went black upon seeing this.
"Isn't this just the same stuff as before?"
However, the thought had barely crossed his mind when he realized he had asked a stupid question.
Although Haro possesses highly advanced autonomous AI, it is essentially still just a maintenance Robot.
To create something, you definitely need relevant information.
So he turned to Haro, who was standing next to him, and asked.
"Haro, if I give you the information on a certain item, can you help me manufacture it?"
Upon hearing Luca's question, the little guy rolled backward and looked up at the ceiling.
Due to its physical structure, Luca couldn't tell at all whether it was expressing pride or "rolling its eyes" in mockery.
However, the next moment, Orange Haro suddenly leaped up, carrying the data cable connected to him, and slammed into Luca's arm again.
"Stupid Luca! Stupid Luca!"
"Hmm... I see... he's disgusted with me..." Luca thought to himself.
However, despite its aggressive demeanor, the little thing actually crashed right into Luca's right Mechanical Arm.
Luca himself didn't react much, but Orange Haro was thrown back with a "bang," nearly crashing into the computer screen behind him.
Fortunately, since the data cable was still connected to the computer, the little gadget didn't fly very far. Like a tennis ball held in place by a rubber band, it bounced back.
This time, Luca didn't even need to ask a question; Haro, who had returned to the table, started muttering again.
"Support Mecha! Support Mecha!"
Upon hearing this, Luca immediately understood what Haro meant.
Somewhat amused, I reached out and tugged at its two little arms that were sticking out from its spherical body.
"Haha, is it because it's inherently difficult to operate?"
Indeed, Haro's main body also has two Mechanical Arms.
However, due to its design, its decorative and cute attributes may far outweigh its practicality.
However, seeing that the little thing was about to get angry again, Luca decisively pressed it onto the table, preventing it from moving an inch, and only then was he able to communicate with it harmoniously again.
The next step is to talk to the Orange Haro, which is quite troublesome.
However, Luca still managed to glean from it what conditions were generally required for Haro to help him develop and manufacture items.
In summary, there are three points.
First and foremost, Haro should at least have a complete dedicated repair Mecha.
After all, although Haro itself can connect to a computer, many devices still require manual operation, and Haro's short hands obviously cannot complete overly complex tasks.
Moreover, this Haro-Specific Maintenance Mecha can not only be remotely connected to the network, but also perform "Haro-free operation".
It also comes with some small tools such as welding torches, Wrenches, and screws.
With it, Haro can completely replace a seasoned mechanical engineer.
If industrial production were to be carried out and manufacturing scale expanded, this repair Mecha, working in conjunction with Haro, would already be considered a well-coordinated mechanical engineering team.
Yes, and the kind who's proficient in programming.
Secondly, it involves generating data and establishing clear goals and directions.
Although Haro possesses a certain degree of independent manufacturing capability, it is essentially a small intelligent Robot designed to assist in research and development and maintenance.
If Haro's own database contains complete information about the items that need to be manufactured, then there's no need to elaborate further.
Alternatively, if Haro is simply providing assistance to actual researchers during scientific research and development, there's probably no problem with that.
However, if the goal is to make Haro the main player, given that Luca, that unreliable imposter, is not helpful at all.
Using incomplete information about items, or even "high-tech gadgets" that Haro's abilities couldn't comprehend, he analyzed and deduced to provide effective manufacturing solutions.
Therefore, Haro needs to rely on its existing theoretical knowledge and greater AI computing power to perform analysis and combination.
In other words, Haro itself actually possesses a certain degree of "creativity".
However, this so-called "creativity" is actually more like a reasonable path provided by AI calculation and analysis.
Speaking of computing power, we need to talk about the last condition for Haro to create items.
That's the Server that provides computing power.
As an intelligent auxiliary Robot, Haro's internal computing power is more than sufficient for tasks such as maintenance, operation, and interaction.
After all, due to its cheat-like abilities, the Orange Haro's internal small computing module already falls into the category of cutting-edge technology.
However, when it comes to work involving "research and development," "creation," and "deduction," Haro's own computing power is far from sufficient.
In the original Gundam 00 universe, work involving this aspect often requires Haro to connect to a larger external Server for a temporary upgrade.
It may be supported by a super-large quantum computing system like "VEDA" or by the spacecraft's own core processor.
The exact level of development efficiency depends on how much computing power Luca can provide to Haro.
Otherwise, if Luca wanted Haro to piece together a moving humanoid Mecha using the existing data and the technologies available in the Gundam 00 world, the little thing would probably be out of commission for several months.
However, after finally figuring these things out...
Luca was already very satisfied with Haro in front of him.
It is estimated that for a considerable period of time to come, Haro's development and manufacturing capabilities will serve as its "teacher" and "test-taker" for Luca, the imposter inventor.
"Furthermore, if we look at it this way, perhaps there's no need to go to Jupiter. Maybe with the Haro calculations and derivations, it's not impossible to create Pseudo GN Drive?"
Of course, all of this is predicated on the premise that existing technology can indeed manufacture a "Pseudo GN Drive".
However, Luca has not yet begun testing Haro's manufacturing capabilities.
Instead, he calmed down and began to examine again the few items that Haro had mentioned earlier, the ones he could currently create.
The repair of the Mecha has been mentioned before and needs no further explanation.
The fact that Haro itself can produce even more Haro also pleased Luca.
It's still unclear how much ability these "cloned Haro" will have without the added bonus of cheat codes.
However, I think it should be more than enough as a lab assistant.
In addition, the complete Gundam pilot suit is actually a rather high-tech product, including a helmet, a tight-fitting spacesuit, a zero-gravity jetpack, and a personal pistol.
However, these things are not considered important technologies for Luca, or rather, Orange Industries at present.
It is estimated that it will not be truly useful until Orange Industries' commercial cooperation extends to the aerospace field in the future.
"If there's a channel to send a PowerPoint presentation to the space agency, it's not impossible to sell a concept."
In the very end, it was the "E-Carbon Armor," which Luca had previously overlooked because it lacked "GN Particles," that caught his eye again.
Indeed, a complete "E-Carbon Armor" needs to have "GN Particles" capabilities to achieve a terrifying defensive capability that is almost immune to kinetic attacks.
However, in reality, even without "GN Particles," the properties of "E-Carbon" still far surpass those of most existing alloys.
Density, toughness, hardness, high temperature resistance, corrosion resistance, energy conductivity, and even manufacturing cost.
Taking all factors into account, this material completely surpasses existing materials in the field.
In the original Gundam 00 universe, the reason why the three major powers on Earth were able to mass-produce humanoid Mecha was essentially due to the existence of a material called "E-Carbon".
Moreover, because the material "E-Carbon" has already been widely used in the Gundam 00 world.
Therefore, the information from all aspects is outrageously detailed.
This stuff is actually somewhat similar to carbon fiber in essence.
However, the excellent performance of carbon fiber is due to the interlacing of micron-sized carbon fiber tubes and the addition of composite materials for fixation.
The material "E-Carbon" is essentially a carbon nanotube made by chemically depositing and electromagnetically confining carbon isotopes, which autonomously arrange themselves into a special lattice structure, and then arrange them in a specific complex sequence.
This manufacturing process also brings one advantage.
Although they are all called "E-Carbon", they are actually a collective term for a large class of materials.
By combining it with specific composite materials or reducing the density of carbon nanotubes, it can be achieved.
This will result in a large number of "E-Carbon" materials with different strength properties.
As long as the Orange Industries can fully absorb the industrial production of "E-Carbon".
Luca could even create "E-Carbon 1~16" or "E-Carbon Standard Edition", "E-Carbon Youth Edition", and "E-Carbon Pro Max" by "technically stripping" the technology.
Leveraging the superior performance of supermarket surface materials, they continuously iterate their products, repeatedly reaping profits from consumers.
This single material was enough to make Orange Industries a commercial giant.
"It seems that Orange Industries now has at least one guaranteed industry for the future, no, it could even be a wholly-owned subsidiary."
Having figured all this out, Luca finally felt a huge weight lifted from his heart.
However, still buzzing with excitement, he had no intention of resting now.
Instead, they took the newly "born" Orange Haro and began building it a "Auxiliary Maintenance Mecha".
Well... of course, it's wonderful to dream, and the future is bright.
However... Luca is not yet capable of using such a luxury as "E-Carbon". Even for other components, they are piecing together readily available materials as much as possible.
3D Printing, structural welding, programming...
Haro, the true mechanic, takes charge of the command and delicate work, while Luca, the mediocre Robots, acts as a "hand double" for the "big brother."
Next.
Luca, who was making props for the first time in a real sense, didn't leave the Laboratory for three days and three nights.
In the end, he actually managed to create a respectable "Haro -specific Auxiliary Maintenance Mecha" all by himself.
Looking at the creation he had painstakingly built from scratch, Luca felt an inexplicable surge of emotion that he couldn't suppress...
Joy and a sense of accomplishment!
"It seems like becoming a real researcher and mechanic wouldn't be so bad?!"
Before I knew it, a smile had crept onto my lips.