3D Printing (Part 2) Happy Mid-Autumn Festival
Inside the container, three pieces of equipment of different sizes were visible.
After Little Five completed the task, seeing Sun Cheng extend his palm, he leaped up from the ground and landed precisely in Sun Cheng's palm.
With a slight smile, Sun Cheng put it back into his pocket, then looked at the three pieces of equipment that had emerged from the container in front of him.
The three pieces of equipment in the container were also brought back from another world. The two pieces of equipment on the left were the same size and looked to be nearly three meters high and six or seven meters long. They were two Twinscan extreme ultraviolet lithography (EUVL) production platforms that had been modified by the Decepticons Engineer.
This is a 22-nanometer lithography machine manufactured by ASML, a Netherlands semiconductor equipment manufacturer. It is also the most advanced lithography machine that Sun Cheng could purchase in this other world.
After being modified by Decepticons Engineer, it can now provide linewidth and spacing with a precision of 14 nanometers, and its nanometer-level direct writing efficiency for semiconductors is nearly 170% higher than the original equipment, making it a high-precision semiconductor device that can be called a national treasure.
However, when compared to the third machine on the right, which is almost larger than both of them combined, these two Twinscan platforms, modified by Engineer, are actually quite inferior.
"Circular 3D Manufacturing Machine!"
Suddenly uttering these words, Sun Cheng slowly walked to the equipment, reached out and touched it, his eyes gleaming.
The machine is called a "Circular 3D Manufacturing Machine," but he prefers to call it a "3D printer."
The equipment in front of Sun Cheng was designed by the Decepticons Engineer at his request, to facilitate Sun Cheng's large-scale production of some high-tech products in reality.
Although the 3D printer in front of him was far inferior in performance to the equipment used to manufacture robots in his Base Two, it was by no means comparable to the so-called 3D printing equipment designed by humans on Earth.
To put it simply, the difference between the two is like the difference between conceptual draft paper and finished product; the technological gap is no less than two or three generations.
"This is a real treasure..."
Sun Cheng's fingers trembled slightly as he touched the 3D printer in front of him, his face filled with excitement.
These three machines were specially brought from another world by him for his own plans in the real world.
Beside him were two Twinscan platforms that had been upgraded to 14 nanometers. Even in the real world, these were the most advanced lithography machines that not every country could afford. For his business strategy, which started with semiconductor memory, the benefits were enormous.
According to Sun Cheng's understanding, ASML not only imposes a sales ban on China in the world of [Transformers].
In his world, this Netherlands company was already controlled by well-known European and American semiconductor giants such as Intel, Western Digital, and Micron Technology more than a decade ago.
In recent years, ASML's highest-specification 14-nanometer lithography machines have not been sold to any semiconductor companies other than Intel, Western Digital, and Micron Technology, and the differential treatment between European and American companies and Asia companies is obvious.
Dozens of China semiconductor companies can only buy 22-nanometer lithography equipment from ASML, and the price is more than 30% higher than that of European and American companies. They can forget about getting higher-level lithography machines, as ASML is also playing the technology blockade game.
The other 3D printer plays an even more significant role.
All it takes is inputting the product design, data, and information to be produced into its central processor, along with sufficient raw materials. Equipped with hundreds of robotic arms, it can automatically manufacture thousands of products, ranging from firearms to electronic devices and even high-precision products, and its manufacturing efficiency is extremely high.
According to Sun Cheng's tests in the other world, under full operation, it can simultaneously produce 36 1TB hard drives in 1,784 seconds, which is about one hard drive every 47 or 48 seconds. This efficiency is comparable to Seagate's semi-automatic hard drive production line in Ohio, United States, which is said to be the fastest and most efficient.
If this 3D printer were used for products with simpler structures, such as firearms, its efficiency could be even higher.
Defender moved forward and stood in front of the 3D printer, staring at it intently.
It seemed to take some interest in the device, but quickly looked away and quietly stood guard beside Sun Cheng.
Sun Cheng ignored it and simply stood quietly in front of the 3D printer, touching its cold outer wall.
It took him a while to look away.
Using such a powerful tool to manufacture semiconductor memory would be a huge waste. Semiconductor memory, such as hard drives, can be produced entirely with the machinery available in this world.
This 3D printer is meant to be used for manufacturing more sophisticated equipment, such as robots.
However, until the production line issue is resolved in reality, having it temporarily produce hard drives for [Cybertron Technology Company] can at least save him a lot of time.
"... It's time to let the humans of this world experience the manufacturing technology of Cybertron!"
Sun Cheng lingered on the equipment for a while, reluctantly rubbing his fingers together, before slowly withdrawing them and silently making his decision.
And it's time for his [Cybertron Technology Company], which he founded in the real world, to make some moves!
A few days passed in the blink of an eye.
After boss Sun Cheng personally gave the instructions, Wang Lu and his team were like Mainspring. With ample financial support, they recruited another twenty or thirty technical backbones who had worked in the industry for many years in just a few days. Cybertron Technology Company, a company with no reputation in the industry, finally began to take action!
Let's get ready to upload our products!
Based on several different versions of cloud storage clients for computers and mobile apps, after completing the filing with the Ministry of Computer Industry, the clients, which had been tested for more than a month, continuously modified and vulnerabilities checked, and confirmed to be free of major problems, were uploaded to numerous internet platforms and mobile app stores.
What no one knew was that, after the approval process, a product that was about to cause a huge sensation in the world would be unveiled to the public.
ps:
I broke my promise to update twice yesterday, but the whole family was here today, which made me very happy.
I drank quite a bit and my head is still spinning, but I've been working on it since 6:30, and I've finally finished two chapters. Here they are!
Going to sleep now. Happy Mid-Autumn Festival everyone!