Skip to main content
  • Home
  • Library
  • Read
    • Popular
    • Charts
    • Browse
    • Categories
    • Wikis
    • Glossary
  • Request
  • Activity
  • Leaderboard
  • Help
Our Apps
  • DaoSearch
  • Narratorr
Social
  • Discord
  • Patreon
Starting from Transformers
Chapter 537

Getting on Track

1,335 words 4 min read 1 view 4mo ago Source ​
Skip to the end of the chapter
Prev
Next

Sun Cheng has been in a good mood lately. Shortly after the hurricane ended, he once again disappeared briefly for two days under the pretext of a business trip.

Upon returning to Isla Nublar, he brought Defender with him to oversee the robots' reconstruction of Base Three.

With the protection of his Defender, Sun Cheng did not linger on the island and soon returned to the Xia Kingdom.

After such a long delay, the development plan, which had been partially stalled in reality, has now started to move back onto the fast track.

With the [Intelligent Machinery Laboratory] officially put into use, his cooperation with the Xia Kingdom government entered a honeymoon period.

[Future Machinery Technology Co., Ltd.. ] has been established for more than two months. Before that, during the graduation season, Sun Cheng recruited a group of fresh graduates with high academic qualifications from various universities in Southern Capital.

The Class II defense and military production license he wanted was delivered to him shortly after Lieutenant Colonel Liu Nianyuan took away two sets of semi-body mechanical exoskeleton armor.

Also present were more than twenty veterans who had undergone specialized training and were qualified to perform security work at key national defense research units.

Like the [Intelligent Machinery Laboratory], the office space of [Future Machinery Technology Co., Ltd.. ] is also located in Ningjiang District.

Because of the special consideration from the Equipment Department, they also obtained a 47-acre plot of land in the core area of Ningjiang High-Tech Park to build a dedicated factory for producing mechanical exoskeleton armor.

Forty-seven acres of land is indeed insignificant compared to large-scale production bases that often span thousands of acres.

However, it was barely enough for a factory that specialized in producing mechanical exoskeleton armor for the military.

Most importantly, the nearby factories mostly belong to several domestic military and defense enterprises, so their security is trustworthy.

The exoskeleton factory is being built by a state-owned construction contractor. Because it is not a large-scale facility, the first steel structure workshop is expected to be completed in a month and a half at most.

It's clear the country is in a bit of a hurry, but Sun Cheng can understand.

The political situation in Central Asia has been turbulent since the beginning of the year. As a battleground for the influence of major powers, everyone understands the principle that if you don't advance, you fall behind.

Moreover, in recent years, with its "pivot to Asia" strategy, the Xia Kingdom, and has even personally intervened on many occasions.

Therefore, the pressure on the country to improve its military capabilities is increasing day by day.

Sun Cheng manufactured a total of four sets of semi-overlay mechanical exoskeleton armor, two of which were taken by the Equipment Department for testing.

The other two sets were placed in the newly opened [Intelligent Machinery Laboratory].

He himself has been staying at the [Intelligent Machinery Laboratory] recently, helping to test and try to improve the low-level semi-overlay mechanical exoskeleton armor that he had crudely created.

Mechanical exoskeleton armor is still in its early stages in terms of design. The products designed by various countries are similar, including the ones Sun Cheng presented, which are all composed of three parts: the main body, leg units, and arm units.

Sun Cheng's mechanical exoskeleton armor consists mainly of the parts worn on the chest and back. The chest part has three to five steel shafts of varying lengths and several soft nylon straps, mostly for fixing. The back part consists of a mechanical spine running through it, several steel shafts, and several nylon straps.

The mechanical spine can be considered the core of this mechanical exoskeleton armor. Two lithium-air batteries are fixed to a certain part of the spine, and there are also extremely complex circuits and drive systems inside.

In addition, three bayonets are configured on the mechanical spine, two of which are located on the upper part of the back and one at the tailbone. The two bayonets on the back can be used to add equipment when needed, such as large externally clipped equipment packs, weapon units, etc., while the bayonet at the tailbone is where the external control pack is located.

The control pack is located at the waist, allowing the Taxi wearing the exoskeleton armor to control and activate the drive system and other functions of the armor.

The main components of the leg unit are a steel shaft and a nylon belt, with four small propulsion nozzles at the foot position.

The main body of the dual-arm unit is also made of several steel shafts and nylon straps, with two bayonets attached to each arm and hand for use by weapon units.

Because it is a simplified version of the latest generation HULC Exoskeleton from [Berkeley Bionics Company], this semi-overlay mechanical exoskeleton armor, which is still in its final form and is still referred to as "Experimental Type 1", has a very simple structure.

Even if you remove its all-electric drive system and two lithium-air batteries, the remaining cost is less than 10,000 yuan.

"I'm ready!"

After the "Experimental Type 1" was manufactured, Sun Cheng conducted several simple tests himself to ensure there were no problems before giving two sets to Liu Nianyuan and the others.

However, after the [Intelligent Machinery Laboratory] began operation, in addition to the fixed research topics, continuing to improve and refine the "Experimental Type 1" squad uniform mechanical exoskeleton armor also became one of the tasks.

Without interfering with other research projects in the lab, Sun Cheng, who was temporarily free, personally selected a research team of 27 people.

The team consisted almost entirely of recent graduates from several key science and engineering universities in Southern Capital. However, he also recruited two doctoral students majoring in mechanical manufacturing and automation from Professor Chen Yuan's team.

A group of people have recently been having a lot of fun with two sets of "Experimental Type 1" mechanical exoskeleton armor.

"Experimental Type 1 Mechanical Exoskeleton Armor, 17th Test, Wearer: Wang Jun, Inspectors: Liu Yiming, Liu Jun! Ready to begin..."

Sun Cheng stood quietly to the side, watching a group of young people around his age help put on a researcher's mechanical exoskeleton armor, which weighed more than ten kilograms, for the 17th test.

The wearer in this test was a young man named Wang Jun, who had just graduated from university. It was his first time wearing a mechanical exoskeleton armor, and he was very excited.

With his feet planted on the mechanical legs, his back pressed against the mechanical spine, and his hands against the mechanical arms, the staff helping Wang Jun put on the mechanical gauntlets and secured them, the snapping sounds of the buckles at the joints ringing out incessantly.

Not far away, four cameras were pointed at them, meticulously recording every single scene.

"You're all dressed, get up and do some simple exercises first!"

"Good!"

Wang Jun suppressed his excitement, gave an OK sign to the other researchers watching nearby, and then looked down to open the control bag at his waist.

The control panel inside the package is very simple, with only three different buttons: start, stop, and full power.

Considering that the hands are difficult to operate after wearing a mechanical exoskeleton, the distance between each button is large.

Wang Jun had received basic training before donning the protective gear, and had also observed other researchers' experiments in the preceding days, so he could be considered somewhat experienced.

Therefore, after pressing the start button inside the control pack, he closed the control pack again, and with a soft buzzing mechanical sound, he quickly stood up straight.

"Let's do a few simple exercises first!"

Someone nearby reminded him.

"Good!"

Wang Jun responded, then moved his fingers and rotated his wrist. The fingers of the Iron Fist Glove also made perfect synchronized movements, which made the other researchers around him, who had not yet worn the mechanical exoskeleton armor for testing, clench their fists and their eyes gleam.

End of Chapter
Prev
NovelSummaries
Next

Explore the wiki

Sun Cheng

Comments

No comments yet.
AboutStatsAPIChangelogStatusContactPrivacyTermsDMCA
© 2026 RandomTranslator·v3.26·RSS