There are various methods for driving pipe piles. Common construction methods include: hammering, static pressure, vibration, water jetting, pre-drilling, and mid-excavation. However, no one expected that the Pioneer would actually drive the pipe pile in by force using its own machine.
Considering the ebb and flow of the tides, this time we only need to drive the pile 6 meters into the ground, and only about 3 meters above the water surface. Therefore, we only need to weld a short pile of about 5 meters onto the ground pile.
As the Trail Blazers struck, the sound resonated deep within everyone's hearts, and their heartbeats nearly synchronized with the rhythm of the strikes.
Many project managers also saw the news reports about the construction and witnessed how the two pioneers had completed what was originally a complicated project as if it were a game. The sinking pipe piles seemed to sink like their own hearts.
If the Trail Blazers can mass-produce them, then what chance do I have?
However, if the Trail Blazers can mass-produce it, we'll have to grit our teeth and buy it!
Unaware that others were already envious of him, the pioneers paid no attention to such things and continued to complete their tasks.
The flat-bottomed boat beside him was like his own warehouse. After the local piles were driven in, the end plates of the next short piles needed to be welded.
The end plate is a circular iron plate at the top of the pipe pile. The outer edge of the end plate has a bevel along the circumference. After the pipe piles are joined, the bevel becomes U-shaped. During welding, the U-shaped bevel around the pipe pile is filled.
It sounds simple, but if it's done manually, the requirements for joint welding are high. The weld should be uniform and full, and the weld surface should ideally have a "fish scale" pattern. This is something that only experienced craftsmen can do.
Many reporters were also focused on the Trail Blazers' construction, and they were puzzled when they saw the pipe piles being driven deep into the water.
Kexin, having regained her senses, continued reporting.
"As you can see, the precast pipe piles have now been driven into the ground by the Pioneers, but the joints have not yet been welded. Does this mean that Origin will have to hire an underwater welding company to carry out the welding work next?"
Seeing that the Trailblazers had already picked up another short pile, but no other construction workers were seen around them, they were puzzled.
When both Trailblazers crouched down, everyone's eyes nearly popped out of their sockets. This was...
When two dazzling white lights appear in the murky river water and bloom underwater, it is the unique white light produced by welding. Even with the river water as an obstruction, it makes people involuntarily close their eyes.
The hissing sound of electric welding echoed throughout the construction site.
As everyone knows, the two Blazers have started underwater welding simultaneously!
"It... it really is possible..."
This is a common sentiment among those who understand these things!
The underwater environment makes underwater welding much more complex than on land welding, involving not only welding techniques but also diving operation techniques and many other factors.
Poor visibility, high hydrogen content in the weld, the rapid cooling effect of water on the weld, the influence of pressure, and the difficulty in achieving continuous operation are all challenges in underwater welding.
This is a problem that is difficult to achieve even manually. The two pioneers welded directly underwater, just like ordinary welding.
If...
If we can really weld them well, this technology would be of great help to many projects.
Numerous bubbles began to churn, and white smoke surged from the bottom of the water, but thanks to the advanced exploration equipment of the Trailblazers, it posed no obstacle to the two Trailblazers.
In just over ten minutes, a pipe pile was welded.
When everyone saw the white light of the welding disappear, they also saw the Pioneer stand up, the pipe pile firmly welded to the ground pile.
If anyone were to go underwater to take a look, they would be absolutely astonished. The beautiful fish-scale pattern at the underwater weld joint is like a work of art. There is not a single trace at the weld joint between the two Pioneers; it is as if it were welded together by one person.
The next step is to repeat the previous steps: take the pile, drive the pile, weld, and you're done.
Never before had engineering been so easy. Everyone looked at the Trailblazers who had been working tirelessly, all because of these two Trailblazers.
After all the pipe piles were laid, everyone gave the two Trailblazers a warm round of applause, as they had provided another visual treat for everyone.
It's truly a treat. Watching the Trail Blazers being built feels like watching a movie, even more breathtaking than a film. These two Trail Blazers are like a treasure chest, always bringing a new surprise each time they appear.
Once all the large precast concrete slabs were laid, a simple dock was completed. This speed was definitely the fastest in the world.
Once the two pioneers completed all the construction work, the subsequent welding of handrails and other components no longer needed to be done by the pioneers, and the first phase of the mission was perfectly completed.
In just about 3 hours, they completed what others would take several days to accomplish, proving the pioneers' capabilities once again.
Meanwhile, the ferries waiting at the dock can begin the first step of transferring the equipment.
Barges transported thousands of pieces of construction machinery to the newly built dock, and the spectacular scene was captured on camera. The scene was truly magnificent.
If the Trail Blazers crossing the river was awe-inspiring, then this is a spectacular display of a thousand sails competing.
Thanks to the hard work of the dispatchers, dozens of barges transported various engineering machinery from different docks to Rose Island.
The two Pioneer robots were also shut down and waiting, standing like gatekeepers on both sides of the dock, watching over the busy dock, preventing any accidents, and cooperating with everyone's work.
The Trail Blazers will also assist with the Rose Island renovation project.
The first thing everyone sees when they come off the dock is the towering Pioneer, and everyone excitedly takes photos to commemorate the moment—a scene that is rarely seen.
The official website of Origin Company also received numerous messages inquiring whether the Trail Blazers could make a purchase.
Even many foreign engineering companies sent letters inquiring about the possibility of exporting the products, saying that prices were negotiable.
However, the official response from Origin Company was that the Trailblazer would not be sold for the time being.
Upon receiving this news, the person who inquired felt both regret and quiet relief.
After all, it's better than someone else being able to buy it. The Trail Blazers' capabilities are simply too incredible. Whoever gets this "killer app" will have an unparalleled ability to advance the project.
Those who fail to purchase the goods will become less competitive, which is absolutely unacceptable.
As more and more people arrived at Rose Island, the bustling scene of various machines and personnel working on site prompted foreign news media to eagerly film the construction.
After refueling, the Trail Blazers began the next phase of their assistance work.