"Xu Chang, what's the current Graphene production capacity at the factory?"
Looking at the clean and tidy factory, Chu Feng was very satisfied with the current state of the factory. He believed that production should not pollute the environment.
On Planet Taibo, if you cause environmental pollution by manufacturing certain products, the punishment can be so severe that it can bankrupt you!
"President Chu, the equipment here is highly automated, so the current production capacity of Graphene film is also very high. At present, the daily production of Graphene film is 50,000 square meters. If production is increased, the production capacity can reach 100,000 square meters."
Xu Chang quickly answered Chu Feng's question, showing that he usually pays attention to these things and is quite responsible.
"The Graphene production base in Yang City is also completed. The Graphene films produced here will be sent there first. The Origin Headquarters is in great need of Graphene films right now, and they are ramping up production in the next few days. They need at least 500,000 square meters of Graphene films now."
Chu Feng 'Chu Feng request surprised Xu Chang for a moment, but he quickly agreed and arranged production as soon as possible. Xu Chang didn't know why such a large quantity of Graphene film was needed now.
"Have the costs been calculated yet?"
I looked at the Graphene films that have already been produced and packaged. Each Graphene film is 2 meters wide and 5,000 meters long, which means one roll is 10,000 square meters.
The rolled-up Graphene looks somewhat translucent, making it impossible to realize that it is made from black graphite.
"Including labor, materials, and other costs, it costs about 28 yuan per square meter of Graphene film. That means the cost of this roll of 10,000 square meters of Graphene is 280,000 yuan."
Speaking of price, Xu Chang has to admit that there are Graphene products on the market now. The two most common types of Graphene heating films are also known as low-pressure films and high-pressure films.
As the name suggests, low-voltage membranes are used with lower voltage electricity, while high-voltage membranes are used with higher voltage electricity.
The first type is the low-pressure membrane.
Low-pressure membranes are commonly used in Graphene therapy protective gear, such as neck supports, waist supports, knee supports, as well as sleeping pillows and heated blankets. Almost all Graphene heating film devices used in close contact with the body utilize low-pressure membranes. However, the internal Graphene heating film in these therapeutic protective gear is less than 0.1 square meters. This demonstrates that if these membranes were sold by the square meter, even after deducting subsequent packaging and processing costs, the price would be extremely high!
The second type is the high-pressure membrane.
High-pressure membranes are generally used in applications such as whole-house underfloor heating, heated murals, and plastic greenhouses.
In the application fields of high-pressure membranes, there are very few direct contact with the human body. Most of them use their own heat to raise the temperature of the air, such as heated murals and floor heating, which are also the two most common applications in daily life.
These products almost all operate by directly connecting to 220V AC power. Among them, the heated murals are more expensive because they are not just a single layer of Graphene heating film, but also have a certain aesthetic appeal, so they can cost around a thousand yuan per square meter.
Underfloor heating, on the other hand, also increases costs due to installation requirements.
From any perspective, it's impossible to reach the price of the Graphene film currently being produced by Origin. In terms of television sales, it would be a rock-bottom price.
If Graphene films from Origin were to be mass-produced and available on the market, well, Xu Chang could practically imagine how the owners of those Graphene manufacturers must feel—it certainly wouldn't be a pleasant surprise.
"280,000?"
Chu Feng pondered for a moment. If all the glass curtain walls were laminated with Graphene, the 200,000 square meters of glass curtain walls would be equivalent to an additional 5.6 million, which was already a small matter.
"Xu Chang, please take this opportunity to work overtime to produce 500,000 square meters of Graphene film. Your bonus will be doubled this month!"
Hearing Chu Feng's words, everyone around was delighted. They hadn't expected the boss to double the bonus as soon as he arrived! That was almost equivalent to a month's basic salary.
Forget about company culture and such; the most practical thing is money. This factory is highly automated, with very little physical labor required. And unlike other chemical plants, there's no concern about health. Everyone cherishes this job, and they're happy to work overtime for a few days. Besides, the boss said the bonuses will be doubled.
"Yes, President Chu, I guarantee I'll complete the mission!"
Xu Chang agreed without hesitation.
Chu Feng ate lunch with everyone in the canteen. The factory provides three meals a day, all buffet style. There are also late-night snacks for those on the night shift. Chu Feng is never picky about these things in his daily life.
After the meal, Chu Feng asked Xu Chang to arrange for the goods to be loaded and delivered to Hailing. Chu Feng then took his leave and returned home. Engineers at the Graphene production base in Yang City were installing and debugging the equipment, and production would begin tomorrow.
"What a tiring life," Chu Feng said with a yawn, sitting in the passenger seat, sounding rather bored.
Alita, who was driving, ignored Chu Feng's complaints.
The Spring Festival made Chu Feng, who was busy all day, rest a bit too much.
The next morning, Chu Feng got up early after being "harassed" by Alita's phone call. Today, the Rose Island Graphene production base in Yang City could start production.
Rose Island is no longer the desolate place it once was. Various white factory buildings are now partially hidden among carefully arranged greenery. When you come here, you really can't believe that this is a factory; it's like you've entered an ecological park.
A diversion point has been built on the highway that runs through Rose Island. Although the second phase of the project is still under construction, the factory area here is already in operation. Many people from the surrounding area have come to see the excitement and are pleasantly surprised to see that the once hazy Rose Island has truly become a paradise.
Chu Feng did not refuse outsiders from coming here. Except for the factory area, which is off-limits to outsiders, other areas, including the ecological park, are open to the public. Now, many people come here to enjoy the scenery when they have nothing to do, and many Pioneer fans also come here to film the Pioneer's work on the second phase of the project.
The origin of this ecological park has also put in a lot of effort. Each flower and plant has a dedicated watering and fertilizing system that does not require manual labor. Moreover, the system is precisely calculated by the AI to handle all the watering and fertilizing, so that some plants will not be drowning while others will be dying of thirst.
Only a "tycoon" like Origin would come up with something so expensive. This system alone cost nearly 10 million. He really doesn't value money.
The Graphene production workshop in one corner of Rose Island is the most important. Even an ordinary workshop has reached the level of a thousand-class cleanroom. The most important production workshop, which houses the Graphene cutting equipment, has reached the terrifying level one cleanroom requirement.
If the number of microparticles with a diameter of less than 0.5 micrometers per cubic meter is controlled to less than 3,500, it has already reached the international cleanroom standard of Class A. Most factories are Class 10,000 cleanrooms, which are used for the assembly of hydraulic or pneumatic equipment, and in some cases also for the food and beverage industry. In addition, Class 10,000 cleanrooms are also commonly used in the medical industry.
The number of micro-dust particles is strictly controlled to less than 1,000 per cubic meter, which is what the industry commonly refers to as a Class 1,000 cleanroom. Class 1,000 cleanrooms are mainly used for the production of high-quality optical products, as well as for testing, assembling aircraft gyroscopes, and assembling high-quality miniature bearings, etc.
The most widely used cleanrooms are Class 100 cleanrooms, which are used for aseptic manufacturing processes in the pharmaceutical industry. These cleanrooms are extensively used in the manufacture of implantable devices, surgical procedures, including transplantation, the manufacture of integrators, and the isolation treatment of patients who are particularly susceptible to bacterial infections, such as the postoperative isolation treatment of bone marrow transplant patients.
However, the factory that originated from it had reached a terrifying level of cleanliness, which means that the density of particles with a size of 0.1um or larger is no more than 35 particles per cubic foot.
This standard is almost the highest standard available today, but the Graphene production workshops that originated from it may have even higher standards!