After comparison, it was found that this door panel is made of 420 stainless steel, which is a martensitic stainless steel that is not only corrosion-resistant and wear-resistant, but also has a relatively high hardness!
From a microscopic perspective, there are certain gaps between atoms, molecules, and ions. When two metals combine, they fill these gaps, naturally resulting in a higher hardness than before.
The best way to deal with such alloys is to break the atomic bond structure, making the originally stable structure unstable!
The simplest method is still heating, but only the cut area can be heated; the rest of the area cannot be heated.
It sounds simple, but it's not so simple in practice. If a physicist heard about this, he would definitely chase you down and chop you into three blocks!
To achieve this, it would be roughly like taking a 90-centimeter iron pipe, making the 30-centimeter section 80 degrees, the middle 30-centimeter section 60 degrees, and the last 30-centimeter section 10 degrees.
After careful comparison, a metal tube was found protruding from Chu Feng's right arm.
Although it appears to be just a single conduit, its internal structure is actually more complex. In the center is an ion flow tube that imparts kinetic energy to the basic atoms, while around the perimeter are conduits responsible for cooling and protection.
This is the cutting equipment carried by the Combat Suit during close-range intrusion into the warship. I didn't expect it to be used here; it's definitely a waste of its potential.
The melting point of 420 stainless steel is between 1450 and 1510 degrees Celsius. The ignition temperature of gas that people usually burn is only about 560 degrees Celsius, while the flame temperature of an acetylene-oxygen cutting torch, which is often used for metal cutting, is about 3000 degrees Celsius!
Acetylene and oxygen can be used to cut stainless steel.
However, the ion stream emitted from this central conduit can heat objects to a maximum of 7,000 degrees Celsius. Keep in mind that the surface temperature of the sun is only 6,000 degrees Celsius!
At this temperature, a person standing in front of it would be vaporized!
The highest temperature that humans can currently produce is 510 million degrees Celsius, which is about 30 times hotter than the core of the sun!
This temperature was achieved on May 27, 1994, by the Tokamak nuclear fusion reactor at the Princeton Plasma Physics Laboratory in New Jersey, USA, using a plasma mixture of deuterium and tritium.
It's even hotter than the 10,000-degree core temperature of Nuclear Bomb explosion!
However, since the temperature of the conduit can be controlled, Nuclear Fusion can only be carried out in the laboratory.
The ion protection measures around the conduit are important devices to prevent heat transfer to the metal around the cut section.
Particles are actually in constant, random thermal motion, and the reason for this thermal motion is that the object has internal energy.
The most intuitive manifestation of internal energy is temperature. In other words, the higher the temperature, the greater the internal energy and the more vigorous the motion.
As a protective mechanism, the ions lock the surrounding atoms in place, preventing heat transfer.
The most obvious effect is the cooling effect, just like the waterjet cutting machine that you can usually see.
Normally gentle water can easily cut through steel plates under pressure of 2000 MPa. With the addition of abrasive, almost no one can withstand it!
Chu Feng's equipment is essentially an enhanced version of a water jet. Water jets are cold-cut, which do not produce heat effects, deform, leave no slag, or cause ablation during cutting, and do not alter the physical and chemical properties of the material.
Therefore, it has a similar effect to water jet cutting!
Theodore was huddled to the side, watched as Chu Feng pulled a tube from his hand and gradually approached the metal door, as if watching a science fiction movie.
The terrifying temperature at the pipe opening distorted the air; just a slight approach caused the high-temperature resistant layer on the surface of the door to crumble, revealing the original alloy material inside.
What happened next completely overturned Theodore's understanding of metal cutting!
The thick steel plate was easily cut open like a soft cake. The alloy at the pulsed cutting point, like ice cream in summer, began to melt slowly. The equipment's built-in control system could perfectly control the direction and intensity of the ultra-high temperature ion flow.
You don't need to cut the entire door panel; you only need to remove the latch.
It cut through smoothly without any obstruction.
The sixteen thick bolts were quickly cut off, and none of the tempered glass's anti-cutting measures were activated.
The hissing cutting sound stopped; the cutting was complete, and the door was finally opened!
"Alita, take control of all electronic devices!"
With the development of technology, electronic devices are becoming more and more common, but this has also given rise to electronic warfare.
In many movies and TV dramas, top-secret communications are still conducted using physical isolation methods, and even the communication equipment is a wired telephone.
Electronic equipment has always been Chu Feng's forte. Having found the data connection point, Alita quickly took over all the control systems.
The entire underground base is now under Chu Feng's control.
The people who built this base probably never imagined that the blast door would be opened without triggering an alarm.
Inside, there were only sensor-activated doors, but when Chu Feng entered, all he wanted to do was blow up Alice, who had been blasted to pieces, all over again!
What came into Chu Feng's view were various corpses soaking in liquid.
There were human corpses, animal corpses, and even many strangely shaped corpses that looked like deformed creatures.
"What are these?" Chu Feng's sudden question startled Theodore.
"These... these are people who couldn't withstand the modification and failed in their enhancement efforts!"
It had also undergone enhancement, although it was only level one enhancement. However, the pain of having one's entire body crushed and reassembled continued to torment him like a nightmare.
If I hadn't been able to endure that pain back then, I'd probably be one of those people soaking in it now.
Inside the container, there were men, women, young and old, but they all had one thing in common: they were in pain!
With twisted and deformed limbs and a ferocious, pained expression, one can only imagine the torment they endured when facing death!
No wonder some people say, "The most cruel creature in the world is the human being!"
"We went through the same thing! It's just survival of the fittest!" Theodore's voice was slightly hollow, as if he had also recalled the scene of his life being worse than death, and even his fear of Chu Feng had faded somewhat.
Where did these people come from?
Chu Feng stared intently at the "coffin" in front of him, from which he could vaguely discern a boy of about ten years old.
Why only vaguely? Because at first glance, the appearance is so different from that of a human boy!
The hair on his head had fallen out, leaving only a few strands, making him look like Gollum from the movie "The Lord of the Rings." His fingernails had also turned into sharp claws.
Bone spurs pierced through the spine, legs twisted and deformed, knees turned backward, like the gait of a hunting dog.
"What else could it be?" Theodore looked at the bizarre corpse and couldn't help but sneer.
"Scammers, cheaters, and thieves! Otherwise, where do you think all those missing people went?"
Theodore's words left Chu Feng speechless.