Guevara felt as if he had entered a science fiction world, where the uniquely shaped mechanical arms, gleaming with silver metallic light, exuded an explosive sense of power!
"Mr. Chu, what is this robotic arm for?"
Guevara looked at the robotic arm that the Origin Engineers had just taken out of the container, somewhat bewildered.
Germany is also a global leader in automated equipment, but I have never seen such a uniquely shaped robotic arm on other production lines.
No hydraulic pipes are visible on the outside; there are only sections resembling the human spine.
Overall, it looks like a centipede with mechanical claws installed.
Chris, standing to the side, was quite envious. He also wanted to know what it was, but he was too embarrassed to ask.
"As you know, hydraulic transmissions inevitably involve pressure and leakage, so they can't be used in situations where the transmission ratio is critical," Chu Feng casually remarked. Of course, Guevara knew this.
"Moreover, due to problems such as mechanical friction, pressure loss, leakage loss, oil heating, and reduced overall efficiency in hydraulic transmission, the original production lines all use electric transmission combined with mechanical structure."
Guevara's face turned red from holding his breath. Of course he knew that his six-axis robot also used electric drive, but many parts still used hydraulic drive, since it was more powerful.
However, the reason why such precision could be achieved was not explained.
The maximum precision that their six-axis electric drive robots can achieve is generally 0.02 millimeters. However, the engine of Origin is a completely different story; it has reached the nanometer level...
This is also a question many people have about FAW's engine production line.
Li Songkang, as the business supervisor and field engineer of the welding workshop of FAW, has experienced the construction, commissioning and mass production stages of four models: Jetta, Audi, Bora and Golf. He is mainly responsible for the maintenance of electrical equipment and robots in the welding workshop.
He is even hailed as an "expert at the forefront of the world's sophisticated industrial robot maintenance."
He has worked with countless robots, but he has never seen a robot as seemingly simple yet extraordinary as Origin.
You say it's complicated? Well, it only has a dozen or so parts. You say it's simple? Well, its precision can reach the nanometer level!
Li Songkang now seems to have returned to his former apprentice state, following the engineers of Origin around.
Under Chu Feng's instruction, the Origin Engineers also taught Li Songkang a lot of business knowledge, at least the most cutting-edge knowledge on Earth right now!
Everyone else in the production workshop was dumbfounded; they had never seen Li Songkang so attentive before.
"Master, how does this robotic arm achieve such precise positioning? Can you tell me?" Li Songkang asked like a curious child, initially hesitant to say much.
A true expert's skill is immediately apparent, and capable people are always proud.
When Li Songkang first learned that Origin Company was going to dismantle and replace a production line, he immediately got furious. This was equipment that he had carefully debugged and that represented all his hard work. How could they just dismantle it like that?
However, once the Origin Engineer accurately pointed out the error using his hands and eyes, Li Songkang stopped talking. This was definitely the work of a master!
"The error in accuracy largely stems from friction." The Origin engineer continued explaining to Li Songkang without stopping his hands.
"The first is to reduce friction, the second is to avoid friction, and the third is to determine the error!"
The engineer pointed to the connection point of the robotic arm and then said, "The joints here are all connected using magnetic levitation, which allows for precise control of angles and positioning."
Li Songkang adjusted the frame of the glasses and took out a magnifying glass to examine the joint design of the robotic arms closely.
Although it is not powered on now, its joints are indeed different from those of a regular robotic arm.
"Moreover, each control device uses laser tracking and positioning to ensure that the positional and orbital accuracy are within acceptable limits."
"Pass?" Li Songkang was a little curious. How much error was considered acceptable?
"How much error would be considered acceptable?"
"The error must not exceed 5 nanometers!" The Origin engineer said without turning his head, while Li Songkang looked at the dozens of mechanical arms of different shapes in front of him as if he had seen a ghost.
"How is this possible?" Even though he knew the other party had no reason to deceive him, Li Songkang still found it hard to believe that such exaggerated precision could be achieved with just a few components.
Putting aside everything else, robotic arms need to rotate and move, and the error caused by inertia alone is more than that, right?
Even with the highest precision resistors in electronic control, the error is around 0.1%, and that's for the most precise ones; other types have much larger errors!
And these errors, after being passed through many times, result in even greater errors!
This is also a problem that many automated production lines need to consider. Every vibration of the conveyor belt or deviation of the robotic arm will cause the error to become larger and larger, at which point someone needs to make corrections.
"This is our server design diagram; you can take a look."
The Origin Engineer finally turned around, only to pull a crumpled blueprint from his pocket.
Li Songkang was overjoyed, but when Li Songkang opened the blueprints, he discovered that it wasn't that simple!
It's not that there's a problem with the drawing, but rather that it's too detailed. It's so detailed that the specifications of the wires and the number of turns in each coil are clearly marked!
But how do you make a wire with a diameter marked as 15 nanometers?
How should the winding angle and number of turns for each coil be determined?
"This... how did you make this?" Li Songkang was dumbfounded. Was this even made by a human?
"Just process it according to the drawings, it's very simple."
"Very... simple?" Seeing the other party's matter-of-fact attitude, Li Songkang really didn't know how to say it.
Seeing that the other party was still busy, Li Songkang could not say anything more and could only follow along and watch how the other party operated.
Meanwhile, in Germany, Guevara also appeared to be suffering from dementia, his eyes filled with confusion.
Who am I? Where am I? What do I do?
One question after another popped into his mind, but one thing Guevara was certain of was that Origin Company's expertise in servo drives was definitely not as simple as he had imagined!
"This is an integrated intelligent network servo drive that we have specially designed for industrial robots!"
Chu Feng took out a technical component that was about 10 centimeters long and wide from the box next to him.
This is the servo driver that Chu Feng was talking about. No one expected that this small, chip-sized thing would have such a big effect!
"The built-in vibration suppression algorithm and feedforward control can greatly improve the motion accuracy and dynamic capabilities of industrial robots!"
"Moreover, this requires interaction with the Origin-specific controller to be effective!" Putting down the servo drive in his hand, Chu Feng answered Guevara's question with a smile.