Skip to main content
  • Home
  • Library
  • Read
    • Popular
    • Charts
    • Browse
    • Categories
    • Wikis
    • Glossary
  • Request
  • Activity
  • Leaderboard
  • Help
Our Apps
  • DaoSearch
  • Narratorr
Social
  • Discord
  • Patreon
Return from a Low-Magic World: Creating an Artificial Intelligence
Chapter 395

Technology in Demand

1,730 words 6 min read 0 views 3mo ago Source ​
Skip to the end of the chapter
Prev
Next

"If we hand over all the magic-related technologies, will they ease the sanctions? Otherwise, will they escalate them?"

Wang Yi, who had returned to the laboratory, couldn't help but find the news relayed by Lin Shiqin somewhat amusing.

However, this does seem to fit their usual behavior.

Anyway, just start by bluffing. If you succeed, you make money. If you don't succeed, think of other ways. Take it one step at a time.

The ancient saying has always used "to seize by trickery and force" to describe this, but they didn't even bother with the superficial formalities of "skillful seizure" and went straight for "forceful seizure".

The same applies to Umbrella this time.

"Let's keep stalling them. How's the ammunition modification going?"

Wang Yi didn't tell Lin Shiqin to give a direct rejection; he just dragged it out and said whatever she wanted.

Time is on our side; let's just keep dragging it out.

If visitors from the Abyss ever come, they'll be thrown at you so you can save the world.

That's what they say in the movies...

"It's all done. All the Ka-28s have been equipped with new gear, as have the previous batch of drones."

"That's good. The stability of the propellant and explosives here is almost there. If we have enough raw materials, we can gradually replace them."

Wang Yi continuously performed various verifications on the test bench.

The modifications are now so advanced that Lin Shiqin can produce both types of 'gunpowder' simply by controlling the magic machine without having to do it herself.

Cruise missiles have high fuel requirements due to their size and the amount of propellant they carry.

While aviation fuel can be used for propulsion, more advanced methods often involve using polycyclic high-density hydrocarbon fuels, high-strength hydrocarbon fuels, and adding high-energy substances.

There is a difference between the propulsion of cruise missiles and the propulsion of rockets and ballistic missiles.

However, since they've already started building missiles themselves, Wang Yi naturally needs to optimize them.

Moreover, due to the current limitations of the usable land in Penglai, Wang Yi also wanted to achieve the standardization of the corresponding 'gunpowder'!

In other words, this propellant can also be used for other applications in the future.

This will naturally cause some trouble.

Ultimately, he chose a trinitro solid 'gunpowder' infused with magic factors!

Depending on the mixing ratio and the oxidizer, this uniformly manufactured 'gunpowder' can be used as both a propellant and an explosive.

Moreover, its power and performance are more than twice that of current competitors!

Actually, the original version of Wang Yi was developed a long time ago, but it was unstable and insecure. After subsequent improvements, it has now almost met the requirements for use.

"Oh dear, our defenses are actually sufficient now. They weren't asking about the propellant. ASML and the others have been holding back on the EUV Lithography Machine, and they've already mass-produced quite a few and started secretly delivering them."

"I guess they'll make an official announcement once the first batch of tests are done, and my upgrade can be on the agenda too. Anyway, it's already on our own turf, so why don't you come and upgrade it for me yourself, boss?"

Lin Shiqin spoke in a coquettish voice, as if trying to please her.

"Penglai already has the supporting production line for EUV. You can build it yourself. Don't ask me."

Wang Yi was speechless.

Lenses can be said to be where he first started his business; even the principle of magic nuclear fusion was discovered while researching lenses.

The DUV Lithography Machine can be considered a product that was merely 'testing the waters'.

Why keep using dry lithography?

The reason is that EUV Lithography Machine cannot use the immersion method, and they cannot even use the traditional dry EUV Lithography Machine; instead, they must use a 'vacuum' environment.

Extreme ultraviolet radiation is already ionizing radiation, enough to ionize air, let alone liquids.

In this situation, the system outside the main base is naturally DUV, but the one in Penglai is the EUV lithography system that Wang Yi personally created to match the lenses.

Structurally, it is quite similar to previous DUVs, and it is a fully mature technology.

Unlike ASML's EUV Lithography Machine, which lacks a lens that allows extreme ultraviolet light to pass through and requires reflection, resulting in severe energy loss with each reflection wasting about 30% of the energy and ultimately only achieving a 2% utilization rate.

In addition to increasing the size, the high power of the light source also requires a matching cooling system, which is almost equivalent to opening a completely new track.

So actually, Wang Yi's EUV Lithography Machine came out even earlier, and its efficiency and yield rate are far superior!

"But they have EUV now too. The physical limits of silicon-based chips are almost reached, boss, we need to upgrade!"

Lin Shiqin's words left Wang Yi speechless.

She should be able to understand that Wang Yi's advancements in Quantum Computing have certain limitations for her.

After all, the exponential increase in computing power from Quantum Computing, combined with Wang Yi's new formula algorithm, could easily lead to loss of control.

However, Wang Yi certainly won't restrict her from improving the computing power of Classical Computing.

EUV Lithography Machine have a resolution far exceeding that of DUV Lithography Machine.

It uses a wavelength of 13.5nm, which is close to the extreme ultraviolet light of X-ray.

In theory, it has already reached the limit of silicon-based chips!

It's important to know that a single silicon atom is only 0.12nm in size, and we also need to consider the electron tunneling effect. Therefore, the current common view is that 1nm is roughly the limit for silicon-based chips.

Of course, the tunneling effect already appeared when the process was 20nm, and it was solved by structural adjustments. Perhaps a solution will be found when the process is 1nm.

Even so, the size of a silicon atom is still 0.12nm, so it's impossible to separate the atoms.

In this situation, the options are either to increase the number of transistors by stacking more chips, adopting a new architecture and approach, or to consider other materials.

For example, carbon-based is one direction, but there are too many problems to be solved and many troubles to come.

Besides these, there is another material that can exceed silicon-based computing power by hundreds of times at the same density!

Moreover, due to its extremely low power consumption and virtually no heat dissipation issues, it can be easily integrated and stacked in three dimensions, achieving an efficiency that theoretically far exceeds the upper limit of silicon-based systems at the same scale.

That is superconducting material formed by Josephson junctions.

Yes, Quantum Computing also utilize superconductivity, but the application of superconductivity in computers is not limited to Quantum Computing; traditional superconducting computers also have corresponding structures.

Due to cost-effectiveness issues and the current low-temperature superconducting materials, only a single Josephson junction has been made for testing, and integration has not been attempted.

It is well known that superconductivity can be considered as having no electrical resistance and having diamagnetic force. Normally, superconductivity itself cannot form the characteristics of semiconductors. However, by adding an oxide interlayer between two superconducting materials, the same effect can be achieved under certain conditions!

This is the Josephson junction.

However, normally speaking, obtaining superconducting materials is extremely difficult.

In most cases, superconducting materials need to be in a cryogenic environment of liquid helium to exhibit superconducting properties, and even the best ones require liquid nitrogen.

However, Lin Shiqin's intention was clearly to have Wang Yi manually produce some room-temperature superconducting materials to help her.

"Boss, the data calculations for the Mass Driver are complete. To achieve the best results, it would probably be best to add superconducting materials. If you were to use traditional superconducting materials with liquid nitrogen or even liquid helium cooling cycle devices, the required volume and workload would increase significantly."

Lin Shiqin smiled like a little fox.

"Okay, I'll think about it and organize my thoughts."

Wang Yi sighed and rubbed his forehead.

In fact, he had considered superconducting materials a few times. To be honest, he had actually managed to produce a small piece of room-temperature superconducting material using his magic, which turned out to be a silver-copper alloy.

It can be said that it was purely created by brute force without regard to cost, making it somewhat useless.

Because most applications that require superconducting materials actually demand a considerable amount, even the Google Quantum Computing in the 'Sycamore' satellite uses far more superconducting materials than this.

Not to mention the Tokamak devices that are currently the mainstream controlled nuclear fusion devices.

These were all assembled with a cooling circulation system that uses minimal liquid nitrogen, and some parts may still require liquid helium cooling.

However, Lin Shiqin is right. If we want to create the Mass Driver specified in the parameters, the best magnetic coil material to use is a superconductor.

If we don't develop better superconducting materials ourselves, then adding a cooling system would be a huge undertaking in itself.

"Boss, recently someone used King Kong to pressurize hydrogen sulfide and achieved superconductivity at -70 degrees Celsius. I've found the relevant papers and experimental results..."

When Lin Shiqin heard that Wang Yi was looking for ideas, she diligently sent him a lot of relevant information, which piqued Wang Yi's interest.

Hydrogen sulfide?

Want to simulate the properties of metallic hydrogen? Applying pressure to King Kong is indeed a very interesting idea.

The other party uses physics-related methods, while we can use magic to replace many of them. Following this approach might actually make achieving room-temperature superconductivity a simpler goal...

(Note: The 2020 paper on room-temperature superconductivity under pressure was retracted, likely due to suspected fabrication. However, another experimental team has demonstrated hydrogen sulfide superconductivity at -70 degrees Celsius in 2015 and lanthanum hydride superconductivity at -23 degrees Celsius in 2019. These experiments require pressurizing with diamonds to 1 to 2 million atmospheres. From a purely physical perspective, the practical applications of such experimental products are likely still a long way off, making liquid nitrogen superconductivity far more convenient...)

That's all for today! Please subscribe!

What traditional physics can't solve, magic will solve; technology will slowly become more and more unconventional...

This chapter has been revised.

End of Chapter
Prev
NovelSummaries
Next

Explore the wiki

Wang Yi
Umbrella
Lin Shiqin

Comments

No comments yet.
AboutStatsAPIChangelogStatusContactPrivacyTermsDMCA
© 2026 RandomTranslator·v3.26·RSS