The Machine Tool Industry That Would Bury the World!
"Bull's nose!"
"This Artificial Intelligence Jarvis is incredibly productive. Compared to Artificial Intelligence, humans are really weaklings in some aspects."
"A design task that would take humans two and a half days to complete."
Jarvis only took less than a second; I just want to know the extent of the engineer's psychological trauma after learning the truth.
"Poor engineer, is he going to be phased out?!"
"You're definitely going to be phased out. After all, the Artificial Intelligence Jarvis can complete your tasks in less than a second, even if it takes you several days. What use are you then?"
"I feel like the machining industry is doomed."
"I feel like my job is hanging by a thread, and I just want to know what to do in the future?"
The video was flooded with all sorts of comments, with people expressing their amazement, worry, and fear.
"As you can see, one of the biggest advantages of the Starway 5-axis linkage machining center is that it can quickly produce the processing steps according to the 3D part drawings."
This function quickly generates the sequence of processing steps, combined with the function of continuously adjusting the processing accuracy of parts.
The combination of the two represents a miracle, powerful productivity, and a new era in human productivity!
Upon hearing Lin Feng's words, a new barrage of comments flooded the screen, clearly indicating that people were quite agitated.
Of course, while people were quite unsettled, they also acknowledged the power of the Xingtu five-axis linkage machining center.
Under these circumstances, the experience value of the Xingtu five-axis linkage machining center is soaring.
Of course, Lin Feng's videos did not stop. In the following videos, Lin Feng did not appear on the screen. Only the mechanical processing video clips and the measurement accuracy video clips were shown.
These scenes are accompanied by Lin Feng's background audio introduction.
As mentioned earlier, the machining accuracy of the Xingtu five-axis linkage machining center has increased rapidly with the continuous production of parts, which has become apparent.
Throughout this process, Lin Feng continuously explained its immense significance, educating people about what it means for the processing precision to remain stable at 0.001mm.
And so, after a few minutes, the entire video finally finished playing, and people reluctantly turned their attention away.
He then quickly opened his chat software and shared the news with his friends, family, and relatives.
Meanwhile, the experience points of the Xingtu five-axis linkage machining center are also soaring rapidly, and it is getting closer and closer to the upgrade.
As for other machine tool manufacturers around the world, they all sighed and said, "The wolf is coming!" because this is a machine tool that can maintain a machining accuracy of 0.001mm under normal circumstances.
Moreover, it can quickly generate the sequence of part processing steps in less than a second, features that have left other machine tool companies feeling somewhat isolated.
It can be said that the emergence of the Xingtu five-axis linkage machining center has put other five-axis linkage machining centers under pressure to the brink of bankruptcy.
I just don't know if this Xingtu five-axis linkage machining center will be sold to other machining manufacturers. If it is, then everything is terrible.
Those machining manufacturers will definitely prioritize purchasing Xingtu Technology's Xingtu 5-axis linkage machining center, which will deal a devastating blow to the 5-axis linkage machining centers of other machine tool companies.
As for whether Xingtu Technology will sell its five-axis linkage machining center.
Lin Feng would naturally not refuse to sell something that would benefit the country.
After all, having this product monopolized by Xingtu Technology doesn't maximize profits and effectiveness.
Leaving aside the global market, let's just take Great Xia, which is known as the world's factory, as an example.
In a country as large as Great Xia, the number of high-precision parts that various industries need to process every day is unimaginable.
Relying solely on the production capacity of Xingtu Technology, it is actually impossible to meet the high-precision parts manufacturing orders of the entire Great Xia and even the world.
Therefore, the best strategy left for Lin Feng is to sell the Xingtu five-axis linkage machining center to the outside world.
This allows other machining manufacturers to acquire the Xingtu five-axis linkage machining center and then process their own high-precision parts.
There are two brilliant aspects to this that are enough to make people curse Xingtu Technology for being too cunning.
The first advantage is that the Starway five-axis linkage machining center requires the use of the Artificial Intelligence Jarvis.
This naturally applies to both domestic and foreign machinery manufacturers.
Anyone who wants to use the Exeed 5-axis linkage machining center needs to pay Xingtu Technology a 'Xingtu Tax'.
In other words, a small fee is charged for each high-precision part produced, and each fee seems insignificant.
But think about how many high-precision parts Great Xia needs every day, and then think about how many high-precision parts the whole world needs every day...
It's safe to say that even if each part only incurs a 'Xingtu Tax' of 0.5 yuan, the company could rake in money every day from all over the world.
Therefore, for Exeed's five-axis linkage machining center, Xingtu Technology's sales strategy can be to adopt a low-profit approach.
This way, you can attract mechanical processing manufacturers to buy your products, and then you can just sit back and collect money. How wonderful is that?
What's even more remarkable is that, because Xingtu Technology's Exeed five-axis linkage machining center is priced with minimal profit, other manufacturers cannot follow suit even if they want to.
Because the Starway five-axis linkage machining center is controlled by the Artificial Intelligence Jarvis, it can achieve fully automated production.
The machining accuracy can be maintained at 0.001mm under normal circumstances, and the machining sequence of parts can be designed quickly and automatically.
If their prices were on par with Xingtu's five-axis linkage machining centers, given these two major advantages, then no one would buy their machine tools.
If they sell it cheaper than the Xingtu five-axis linkage machining center, and sell the five-axis linkage machining center at a rock-bottom price, then it means that they lose money on every one they sell.
Under such circumstances, both the five-axis machining centers they are currently selling and the five-axis machining centers they are developing have been driven to the brink of despair.
Under such circumstances, unless the country completely bans the Xingtu five-axis linkage machining center from entering the country.
Otherwise, it would be inevitable that Xingtu Technology would monopolize the global five-axis machining center market!
As for the second advantage?
The second benefit is related to the first, and it is incredibly beneficial, which is why Lin Feng was willing to sell the Xingtu five-axis linkage machining center.
The second advantage is that, in order to use the Starway five-axis linkage machining center, it must be connected to the network and controlled by the Artificial Intelligence Jarvis for production.
This also means that Lin Feng holds the lifeline of global machining manufacturers in his hands, and it also means that if they offend Lin Feng...
Lin Feng only needs to have the Artificial Intelligence Jarvis disconnect the five-axis machining center of that machining manufacturer, and their five-axis machining center will be nothing more than a pile of useless scrap metal.