Skip to main content
  • Home
  • Library
  • Read
    • Popular
    • Charts
    • Browse
    • Categories
    • Wikis
    • Glossary
  • Request
  • Activity
  • Leaderboard
  • Help
Our Apps
  • DaoSearch
  • Narratorr
Social
  • Discord
  • Patreon
Humanity Vanishes, Luckily I Have Billions of Clones
Chapter 163

Q Value

1,187 words 4 min read 15 views 4mo ago Source ​
Skip to the end of the chapter
Prev
Next

In Controllable Nuclear Fusion facilities, there is a very important concept: the Q Value.

It is the ratio of the output energy to the input energy of a Nuclear Fusion Reactor.

Suppose 1 MJ of energy is input to start fusion and maintain its operation, but the Nuclear Fusion Reactor can only produce 0.8 MJ of energy. Then the Q Value is 0.8, which is less than one. The input is insufficient to produce the output, and this reactor technology is obviously not practical.

Even in human times, people had already mastered Controllable Nuclear Fusion technology and even achieved Q Value of around 5.

However, this technology still faces enormous challenges.

First, the ignition time is insufficient. Such a device can usually only maintain the flame for a few minutes before shutting off, and cannot be sustained for an extended period.

Secondly, Q Value of 5 is still far too low.

If we measure Nuclear Fission Reactor using the concept of Q Value, its Q Value is usually maintained above 100.

The Lantu Ke People' mature Nuclear Fusion Reactor technology typically maintains Q Value above 300.

That is, if 1 MJ of energy is input to maintain Nuclear Fusion Reactor, it can produce more than 300 MJ of energy.

The difference is enormous.

Before the Lantu Ke People arrived in the Solar System, Li Qingsong had also conducted research on Controllable Nuclear Fusion for a period of time and achieved some results. However, with the subsequent large-scale military preparations, this research also came to a halt.

Now, under the guidance of about 200 experts related to Blueprint- Controllable Nuclear Fusion, Li Qingsong has picked up this technology again.

Soon, a massive Nuclear Fusion Reactor was built.

It looks like a huge rock, more than 20 meters high, and 40 to 50 meters long and wide, making it extremely large.

However, the vast majority of these facilities are auxiliary. Only a small portion is used for Nuclear Fusion.

This small section is circular in shape, like a pipe.

Outside these pipes, a dense array of facilities are in operation.

At this moment, some deuterium and tritium gas used for startup were introduced into it.

The deuterium-tritium mixture is first ionized, and then, under the influence of a magnetic field, enters the reaction region.

Subsequently, Li Qingsong used methods such as Neutral Beam Injection, Radio Frequency Heating, and Laser Heating to raise the temperature of this mixture of gases to over 100 million degrees Celsius.

At such high temperatures, it is impossible for any known object to come into direct contact.

So how do we keep them bound? After all, once they disperse, the pressure drops, and Nuclear Fusion can no longer be sustained.

At this point, Li Qingsong's previous research on Secondary Pressurization Propulsion Technology, as well as a technology used in Electromagnetic Cannon, came in handy.

Magnetic Confinement technology.

By using an electric current to create a magnetic field, and using an invisible magnetic field to bind the gas without any actual contact with it, the gas is prevented from running away or dispersing.

Under the powerful magnetic field, in the Ring-Shaped Reaction Chamber, this mixture of deuterium and tritium gas, despite possessing enormous energy and pressure, still could not disperse.

And so the Nuclear Fusion reaction finally began.

Under extremely high temperature and pressure, the deuterium and tritium nuclei finally overcame the Coulomb Barrier, began to approach each other, and eventually combined into an unstable intermediate nucleus, which then rapidly split into Helium Nucleus and neutrons.

In this process, about 0.375% of the mass is converted into energy and radiated to the outside world through Helium Nucleus and high-energy neutrons.

Li Qingsong only added some tritium gas to the Nuclear Fusion Reactor at the beginning, and then stopped adding it, instead continuously adding deuterium gas.

But Nuclear Fusion occurs between deuterium and tritium. Without replenishing tritium, how can fusion be maintained?

Here, Li Qingsong used a special technique.

Tritium Self-Sustaining Technology.

In simple terms, the wall material of the Ring-Shaped Reaction Chamber contains Lithium Element. The Deuterium-Tritium Fusion process releases high-energy neutrons, which bombard Lithium Element, causing the Lithium Nucleus to react with the neutrons to produce tritium and helium.

Lithium is continuously converted into tritium, which then replenishes the reaction chamber and reacts continuously with externally supplied deuterium. After the reaction consumes the tritium, lithium from the chamber wall is converted back into tritium, and the cycle continues.

This is Tritium Self-Sustaining Technology.

This technology allows Nuclear Fusion Reactor to avoid the problem of needing to replenish large amounts of tritium gas.

Because tritium has a very short half-life, only a little over ten years, it is almost impossible to mine naturally occurring tritium.

At this moment, Nuclear Fusion has been initiated. The energy generated by Nuclear Fusion is collected through the heat dissipation device in the Ring-Shaped Reaction Chamber and used to boil water to generate electricity.

The heat primarily comes from high-energy neutrons. Another portion of the energy-carrying Helium Nucleus is used to heat the deuterium-tritium plasma to maintain the fusion environment.

In this way, a complete Nuclear Fusion device completes the entire operation process.

At this moment, this massive Nuclear Fusion Reactor is operating continuously. In the distant control room, hundreds of Blueprint Scientists, along with numerous clones, are closely monitoring its operational status.

The Blueprint Scientists certainly understood the principles and structure of the entire Nuclear Fusion device, but it was, after all, a complete scientific device involving numerous technical details. It would take millions of people to even memorize all the relevant knowledge.

At this moment, these hundreds of Blueprint Scientists only know the technical framework; Li Qingsong still has to study a large number of technical details himself.

Even so, it has already saved Li Qingsong countless years and countless hours of energy.

This Nuclear Fusion Reactor ran for a full hour before being shut down in a controlled manner.

Li Qingsong was overjoyed to see that, during the entire operation cycle of this Nuclear Fusion Reactor, if the total energy input from the outside is recorded as 1, the energy it produces reaches 12, that is, the Q Value reaches 12!

It surpasses even the most advanced technology of humankind in this era!

If one had to nitpick, this Nuclear Fusion device could be considered practical, though its capabilities were rather limited.

Li Qingsong did not rush to apply it on a large scale. Instead, under the guidance of the Blueprint Scientists and with the help of a wealth of data collected from the Lantu Ke Civilization, he continued to conduct research and experiments.

Through generations of iteration and optimization, while conducting numerous other crucial scientific studies, approximately ten million clones have consistently dedicated themselves to the research of Controllable Nuclear Fusion.

With all these factors combined, Li Qingsong's Controllable Nuclear Fusion technology developed at a speed that left Blueprint Scientists speechless.

In less than 50 years, Li Qingsong's latest generation of controllable Nuclear Fusion Reactor has already reached Q Value of 260, which is about to catch up with the most advanced technology of the Blueprint Human!

End of Chapter
Prev
NovelSummaries
Next

Explore the wiki

Li Qingsong
Lantu Ke Civilization

Comments

No comments yet.
AboutStatsAPIChangelogStatusContactPrivacyTermsDMCA
© 2026 RandomTranslator·v3.26·RSS