Speaking of Dwarf firearms, they not only look very similar to the early flintlock muskets of the previous generation, but they also use gunpowder.
Gunpowder has existed in this world for a long time, but for some reason, while its power isn't insignificant, it's definitely less powerful than the gunpowder Solam experienced in his previous life. Perhaps that's the difference between worlds.
Therefore, gunpowder could only be used for mining; as for making weapons, its power was rather unsatisfactory.
The Dwarf muskets, powered by gunpowder, were even more powerful.
Firstly, the Dwarf muskets were too Mage; even skilled warriors, let alone mages, could easily ignore them once they put on their armor.
Secondly, the accuracy is ridiculously poor. It's a flintlock musket, after all; without rifling, that's how it is. Where the bullet hits is entirely up to chance. Like the infantry of Napoleon's era foolishly forming squares and firing at each other—did they really think they were insane?
No, it's just that there's really no other way. If we don't do it this way, we can't create any lethality. The bullets just fly everywhere as soon as they leave the barrel and are completely uncontrollable. So we have to arrange them in a square formation to create a bullet surface and increase the lethality a little.
Of course, it's not entirely the gun's fault; the bullet also bears a large part of the blame. Unlike later conical bullets, flintlock bullets were round. As a result, the bullets could not move at a uniform speed inside the barrel, nor could they maintain their direction after leaving the muzzle.
Thirdly, the attack frequency was too slow. Flintlock muskets required loading gunpowder, tamping it down with a stick, then adding ammunition, and finally firing. It looked complicated enough, let alone actually making it. Wouldn't it be better to use that time to chop a few more times with an axe?
Because of these drawbacks, even the Dwarf themselves abandoned this weapon, treating it merely as a slightly dangerous toy.
But the gun Solam is making is not just a showpiece; if all goes well, this rifle will become a deadly weapon!
Solam's plan completely abandoned gunpowder and directly adopted the principle of electromagnetism, using electromagnetic force for propulsion. (I don't know much about this; I've only seen some videos about this principle before, so I won't go into details and will just gloss over it.)
This placed unparalleled demands on the rifling. Since Solam couldn't generate such a large current, he had to work on the rifling itself. His plan was to micro-carve countless miniature magic circles on both sides of the rifling to provide power to the bullet.
Meanwhile, many magic arrays interact on the gun body to ensure the bullet's power. The bullet is also designed in a conical shape. Similarly, the manufacture of the bullet is also a difficult problem, since the diameter of the bullet must also meet strict requirements.
If it's too small, the bullet will move irregularly inside the barrel, affecting not only accuracy and range but also damaging the barrel and reducing its lifespan. If it's too large, the bullet might jam, which would be a problem.
However, these are still just plans. To implement them, Jacqueline's efforts are still needed. Just take those magic circles and enchantments for example; Jacqueline has to design them first. Otherwise, even Solam couldn't make them.
********
In the days that followed, Solam's daily routine consisted of running between the villa and the royal palace.
Although Solam has recovered, he shouldn't be able to freely enter and leave the palace anymore. But don't forget, as compensation from the Queen, he still has two months to study the Book of All Spells.
This time, Solam learned his lesson and stopped being greedy. Each time he studied the Book of All Spells, he would only stay for one day before taking a few days off. Although the ability to focus was very useful, it was mentally taxing; one day was enough to make Solam dizzy and lightheaded.
During his break, Solam wasn't idle; he was practicing micro-carving.
He originally thought that with Precision, this kind of thing should be very simple, but in fact, it still requires practice. In the past few days, Solam has ruined countless gun barrels just by carving them.
This also includes the barrel wasted during rifling, which is a standard technical task.
Never underestimate the power of rifling. Rifling can be considered the soul of a gun barrel. Its function is to give the bullet the ability to spin, so that the bullet can maintain its intended direction after leaving the barrel.
Rifling, also known as rifling grooves, consists of spiral grooves inside the barrel. The concave parts are called grooves in the center, and the convex parts are called grooves in the center. The purpose of rifling is to make the bullet spin, thereby maintaining flight stability, improving accuracy, and increasing penetration power.
The principle of rifling is not complicated. When a bullet enters the rifling at high speed, it moves forward along the rifling and begins to rotate. The rotating bullet is similar to a gyroscope, with the bullet axis acting as the gyroscope axis and the tangent of the trajectory, that is, the direction of the bullet's flight after leaving the muzzle, acting as the vertical axis.
The warhead rotates at 3,000 revolutions per second. It not only moves in circles around the warhead, but also its axis always moves in a conical motion around the ballistic tangent, thus overcoming air resistance and flying forward continuously, ensuring the warhead flies stably forward.
Therefore, it's not hard to understand why a tiny bullet can travel thousands of meters.
The number of rifling grooves is often related to the caliber of the gun, generally between 3 and 12. Pistols, submachine guns, and rifles usually have 4 grooves, while machine guns with larger calibers have 8 grooves.
However, the Solam did not use gunpowder for firing; instead, it used electromagnetic propulsion, resulting in a relatively low initial velocity of the bullet entering the barrel. Therefore, to increase the bullet's velocity and ensure its power and range, the Solam's original design increased the number of rifling grooves to 10.
The idea is that this should be sufficient to provide the electromagnetic force within the barrel, giving the bullet greater power and range.
However, this also brought trouble. No matter how hard Solam tried, the rifling he drew by hand was always unsatisfactory. Moreover, according to Solam's plan, the barrel was forged from Mithral to ensure its magical conductivity, and its strength was extraordinary.
So in the end Solam had to abandon this idea and had to honestly choose the simpler method of six rifling grooves. At the same time, Solam also gave up the method of manually rifling the grooves.
Finally, with Jacqueline's help, Solam managed to create a manual rifling machine based on his memories from his previous life. This time, rifling was much simpler, but the precision couldn't be guaranteed.
And so, Solam's gun-making project came to a standstill before he could even produce a gun barrel.
Until Solam inadvertently revealed his plan to Queen One. These days, Solam frequently visits the Silverymoon High Tower and has become quite familiar with this artificial intelligence.
After learning that his rifle accuracy was insufficient, Queen One offered a solution: she would let him handle the barrel winding. At this point, Solam had to admire the tarnisher's ingenuity.
Solam simply explained the principle of rifling to her, and she understood. She then offered a great solution: using a golem to pull the rifling.
And so, every time Solam came to the Silverymoon High Tower, he had to carry a bunch of steel pipes with him.
However, despite the good plan, many problems still arose during operation. The most serious one was that the steel pipes were not precise enough; they were either not straight enough or the hollow parts of the steel pipes were not round enough.
Queen One is very powerful, but there is no steel pipe forging machine inside the Silverymoon High Tower.
Ultimately, this matter still alarmed Her Majesty the Queen. There was no way around it; Solam was conducting experiments at the Silverymoon High Tower every day, and Queen Laeral Silverhand couldn't avoid it. After learning about Solam's idea, Queen Laeral Silverhand was unexpectedly very interested in Solam.
After all, the idea of using electromagnetic propulsion to move an object at high speed is truly novel.
So after Queen One Solam Soram's gun-making project, Queen Laeral Silverhand also voluntarily joined in.
Queen Laeral Silverhand was indeed Queen Laeral Silverhand. After learning of Solam's predicament, she actually summoned a group of witches and asked them to help manufacture some high-precision steel pipes. Solam remembered the facial expressions of those witches for a long time afterward.
Queen Laeral Silverhand actually went to great lengths to ask a group of witches for help just for a few steel pipes.
Finally, after several days of effort, a group of witches produced a Construct that Solam never expected. Calling it Construct is a stretch; it's more accurate to call it a magic-driven Precision machine tool.
That's right, a magic tool machine! Is this the start of a new tech tree?
The truth is, the witches all thought that the queen was still a child at heart, making them make such useless toys just to fool around with children.
They didn't care at all how useful this strangely shaped Construct was. If these witches really continued their research in this direction, the entire Faerun Continent might just be able to enter the mechanical age.
However, Solam also kept reminding them that they might not believe him anyway. Instead, he devoted himself entirely to making the gun barrels, and finally, Solam was satisfied with the accuracy of the barrels.
Following this line of thought, Queen Laeral Silverhand personally helped Solam create a golem bed, or rather, a bed-pulling golem? Whatever, it was just Construct to replace Solam's crude bed.
With high-precision steel pipes and a high-precision broaching machine, Solam's gun barrels were quickly able to meet the standards.
Next came the inscription of the micro-carved magic circle. Solam made so many steel pipes just to practice, since there was only so much Mithral, and forging it was too difficult. If it broke, it would be a big problem.
Jacqueline had designed the magic circle long ago. At Solam's request, she created two magic circles: one that could discharge electricity and the other that could guide current.
After that Solam began his micro-carving work, and for this Solam lived in the Silverymoon High Tower, hiding for several months. Solam even refused to let Mevis visit him! Mevis was furious about this for a long time.
Despite risking Mevis's wrath, Solam did reap rewards. With the help of his "Precision" ability, he was finally able to begin micro-carving inside the barrel. However, contrary to his initial plan, Solam did not carve along the rifling.
Instead, they chose to carve on the negative lines, since the space on both sides of the positive lines was too small, and the space on the negative lines was slightly larger. At the same time, Solam developed a new use for "Precision".
When Soram activates his "Focus" ability, he simultaneously activates his "Precision" ability. This causes Solam to enter a very mysterious mental state, which he calls "Mechanical Mind."
Once in this state, Solam becomes like a perfectly functioning machine, able to flawlessly inscribe two miniature magic circles! At the same time, he can also make minor adjustments to the magic circles at any time based on the external environment while inscribing them.
Solam's micro-carving tools are actually quite simple: a few thin iron rods of varying lengths, with a miniature L-shaped carving knife at the tip. Because they are made of iron pipes, the inside cannot be seen, so the carving is done entirely by feel, and a single mistake can ruin the entire effort.
If it weren't for his "Focus" and "Precision" abilities, Solam wouldn't have dared to make the cut.
Even Queen One is ashamed of her skill. Initially, Queen Laeral Silverhand and Jacqueline had suggested that the task of inscribing the magic circle be handed over to the Construct.
However, Solam refused, because while Construct could indeed rival Solam in precision, their adaptability was insufficient. Ultimately, they were Construct and could not adjust the magic circle according to the environment as well as humans.