Skip to main content
  • Home
  • Library
  • Read
    • Popular
    • Charts
    • Browse
    • Categories
    • Wikis
    • Glossary
  • Request
  • Activity
  • Leaderboard
  • Help
Our Apps
  • DaoSearch
  • Narratorr
Social
  • Discord
  • Patreon
Warhammer 40K: Return of the Men of Iron
Chapter 112

Standard production line

1,244 words 4 min read 6 views 1mo ago Source ​
Skip to the end of the chapter
Prev
Next

In the Old Era, standardized production plants were widely adopted to cope with large-scale expansion.

The core material used for manufacturing is the STC (Standard Construction) template.

Each template can record different production data. Simply load it into the corresponding interface of the factory production line and place the corresponding materials according to the prompts, and the products will be continuously manufactured from the production line.

Every standard production plant will have at least three production lines, categorized into large, medium, and small sizes based on product dimensions.

All production lines use stacked printing technology, unlike the current Imperium production lines which melt materials, weld them, and then assemble them bit by bit with screws and rivets.

Instead, it is printed in one go.

Units exceeding the standard will adopt a modular design, such as the Knight.

Large units are manufactured in sections, with each section consisting of a different component, which is then assembled together.

Each module has a standard interface that is completely interchangeable, thus adapting to different situations.

The sophisticated equipment and structures of artifacts from the Old Era all relied on this manufacturing method. The properties of the materials would not vary much due to smelting issues.

The superior production technology resulted in a continuous stream of automated Mechanical Legion and formidable combat capabilities.

In the present Imperium, even equipment of the same model produced in two different Forge World will have certain differences in performance.

Many items in Imperium Creations that claim to be built using the STC Template are actually products of STC dungeons modified by the Adeptus Mechanicus.

The reason is actually very simple: Standard Construction Factory are far too scarce. And the Imperium doesn't have the capacity to rebuild these simple, quick, and highly automated factories; otherwise, there would be no need for so many extravagant Forge World. The Federation Era didn't have stacks of construction waste like Hive City.

Destroying these factories was the best option to curb the growth of the Men of Iron and the speed at which the Machine Intelligence army could be increased.

Although the Tech-Priest attributed these differences in equipment to the displeasure of the Machine Spirit or issues of faith within certain Conclave, it was clearly a problem with manufacturing quality control and processes.

After all, different Conclave waste different amounts of time on prayers.

Some religious Conclave that may seem to have weak faith often spend less time blessing armor, metal frames, and screws, but their manufacturing and assembly efficiency is much higher.

At the same time, these features tend to make the equipment more stable and reliable when it first enters service.

Even when the battlefield situation is so complex that one forgets to pray to the Machine Spirit, the equipment doesn't seem to show any displeasure from the Machine Spirit.

Equipment manufactured by Conclave that earnestly pray for blessings often exhibits some illogical behavior, but this is not surprising; in fact, its reliability often becomes more outstanding with increasing service life.

The Priest and Sage attributed it to the blessing of Omnissiah, and the Machine Spirit was overjoyed.

Equipment malfunctions, weapon failures, inaccurate fire control, or even barrel explosions that blow up friendly fire are often expressions of the Machine Spirit's displeasure and the Omnissiah's aversion.

The production line that Iax discovered in the Factory District was a Standard Production Line that had been commonly used in the past. Although it could not produce large Automated Machines or even ultra-large Mechanical Units modules, it could manufacture some medium-sized machines with a size not exceeding ten meters.

Although the production line was not properly installed, it did not prevent Iax from using it.

Once equipped with STC data, the Standard Production Line can clearly mark the location and type of the required or alternative materials, and guide Automated Machines to excavate at designated locations on the Planet based on Planet exploration data.

Since there are no suitable supporting facilities available right now, Iax can only throw all the materials he has at his disposal into the raw material area, where they will be automatically extracted by the production line identification device.

This production line was excavated by Cawl from the ruins of an uninhabited Planet.

Its completeness is very high.

It is comparable to the relics and equipment preserved on Terra.

However, Cawl had never actually used this production line; his heavy workload left him no time to study this ancient manufacturing tool.

It was simply placed in an empty factory and carefully stored.

When Cawl arrived at the Factory District, the production line that had never been used had been put back into operation.

Standing to the side, Iax was continuously piling up the Necrons remains he had collected into an empty area.

The production line operates in a way that Cawl never imagined, which may be the correct way to use these remnants of Ancient factory equipment.

Under Iax's adjustments, the Quantum Decomposer restored and dismantled all the unrecognizable Necrons remains into basic raw materials, and then used these materials to reconstruct matter according to the production information imported by Iax from its own data.

It looks like the Canoptek Scarab's Workbench printing objects out of Necrons air.

When the first massive metal skeleton was printed and rolled off the production line, its skeletal structure information was transcribed into these unique Necrons metals. This experiment convinced Iax that these metals could indeed be compiled as Nano-Swarm structures.

As soon as Iax finished setting up the structure record, he immediately shut down his personal Bodyguard.

The robotic arm flipped and tumbled, disassembling it into a pile of parts, and then reassembled it onto a new metal frame.

After confirming that the energy circulation system was functioning properly, Iax reactivated the Bodyguard Robot and swung his hand to sever one of its mechanical arms.

The Bodyguard Robot picked up the newly entered data with its other hand and placed it in the corresponding position. The Necrons metal began to function like nanobots, and the broken gaps were repaired as if they had never been damaged.

The internally reserved energy pipelines have also been connected accordingly.

The Bodyguard Robot moved its reattached arm to confirm its good condition, and the system's self-check showed normal operation.

After confirming the experiment's effectiveness through feedback, Iax casually tossed the damaged skeleton structure removed from the Bodyguard Robot into the raw material area for disassembly and reuse.

The second one manufactured was not just a skeleton.

A large group of rudimentary small machines, gleaming in bright silver, were thrown off the production line.

These small robots, named WK-3 by the Men of Iron, are less than half a meter tall. They use a small Tracked Chassis and look somewhat like a strange box. They have a bucket with a small filter at the front. The box-like body structure can be expanded to provide nearly half a cubic meter of storage space.

Its main function is to collect excessively fragmented mechanical debris on the battlefield. Furthermore, these small devices utilize Swarm Control Module, enabling rapid and convenient command transmission.

When its storage is full, the WK-3 will look like a large, square trash can.

Therefore, it is also known as a garbage collector. However, in addition to cleaning up battlefield debris, it can also carry out group transportation, and is a tool-type low-intelligence unit.

Iax used the collected materials to create these small robots so they could return to the previous area and retrieve all the Necrons remains.

Once the recycling operation is complete, these small items will be thrown into the materials area by Iax and consumed directly as raw materials.

End of Chapter
Prev
NovelSummaries
Next

Comments

No comments yet.
AboutStatsAPIChangelogStatusContactPrivacyTermsDMCA
© 2026 RandomTranslator·v3.26·RSS