With the operation of the WK-3 small robot swarm, the Necrons remains previously scattered in various passages were transported to the Factory District at an extremely fast speed by these small robots.
When faced with fellow Servitor and Priest picking up trash on the battlefield, these WK-3s would often use their superior power and low-profile build to knock them down, then scoop up the scattered Necrons remains and drive away.
Many Priest said they had never seen these small, Automated Machines before and wanted to dismantle them.
As the mission objectives were gradually achieved, more than a dozen WK-3s were soon parked near the production line, followed by a large group of Tech-Priest. When they saw Cawl standing at the factory gate with his Adeptus Mechanicus Power Axe, all the excited Priest regained their senses.
"Perhaps this is a new creation of the Archmagos, or some kind of experimental technology."
"Beep beep~ It seems inappropriate for the Archmagos to steal the remains of the Necrons."
After a few brief but sharp discussions about binary code, the Priest who had followed them obediently retreated.
Aside from the tunnels that Iax and his Bodyguard Robot had swept through, there were very few Necrons remains on the other battlefields. Apart from a few Necron Warrior that were too badly damaged to be recalled by phase recall, almost nothing else was left.
After all the materials were piled up, the small robots lined up in their respective rows and waited next to the raw material area.
Once all the Necrons remains have been decomposed, they will be the next batch.
Cawl was watching from the sidelines, kept muttering "Omnissiah's blessing" as he watched the pile of Necrons remains being rapidly decomposed. Meanwhile, more enormous figures emerged from the production line.
These enormous Mechanical Units were all six meters tall, and twelve of them were manufactured in total.
These combat machines, which look completely different from the Bodyguard, have a six-legged chassis similar to that of Scarab, but their upper bodies are not standard humanoid structures. Their signature four independently operating mechanical arms have the ability to fire in all directions, or they can be turned to one side for saturation attacks.
This is Elatana-Class Armed Sentinel.
These medium-sized units are among the lowest-ranking units in the Men of Iron ground forces.
This encounter with the Necrons army gave Iax a sufficient understanding of Necrons.
Energy weapons can destroy Necrons forces, but they must be powerful enough.
Otherwise, live ammunition would be necessary.
Iax didn't know if he would ever have the chance to encounter Standard Production Line again. Rather than worrying about how to replenish ammunition for live-fire weapons later, it would be more practical to directly produce energy weapons with sufficient power.
Although he could analyze the design structure of Standard Production Line, much of the information was incomplete. Even if he could analyze the structure, he didn't understand the specific manufacturing process. Moreover, the production line also required giant industrial machine tools for processing.
Building a standard factory, or even just a Standard Production Line, is unrealistic.
Technological research and development and technical analysis are not Iax's forte.
His design purpose was to reassemble existing data, utilize standard factories to transform them into entities adapted to different battlefield situations, and command them in battle.
The standard style of Men of Iron combat is characterized by an endless stream of Men of Iron forces and an advance that is oblivious to death and fear.
Just like the Elatana-Class Armed Sentinel that are now rolling off the production line.
The first six units are equipped with two lightweight Particle Ripper Machine Gun and two Particle Disintegrator Blades on their four mechanical arms, and have one-way Energy Shield. They were specially made by Iax to deal with Necrons Necron Warrior, who are comparable to lightweight robots.
The latter six are equipped with two Atomic Pulse Cannons and deflection Force Field shields.
Unlike conventional Energy Shield that utilize energy density to construct defensive barriers, this shield has a Xenos structure that allows energy to flow rapidly around it. Its design is intended to deflect projectile and energy weapons by impacting them with this energy flow.
It consumes less energy, but its defensive effect is not significantly weakened.
The Atomic Pulse Cannon is powerful enough to deal with the Necrons's Scarab and Destroyer.
As for its enhanced version, the Lord- class, it can be torn apart with just a few concentrated attacks.
This combination was a reluctant compromise by Iax. The energy of the Elatana-Class Armed Sentinel was insufficient to support both Atomic Pulse Cannon and normal Energy Shield simultaneously, even though their size was too large to support both of them, even if they were equipped with standard Quantum Reaction Core.
However, the lack of sufficient numbers forced Iax to find ways to increase firepower.
The remains of the Necrons were considered loot by Iax, but there weren't many of them.
The Men of Iron's army consumes an exceptionally large amount of resources.
The reason Iax decided to manufacture these Elatana instead of the Executor-Class mega-tanks was not only due to a lack of resources, but also because their enormous size was simply beyond the capacity of the current medium-sized Standard Production Line.
As for Titan.
Perhaps dismantling this Craftworld might gather enough resources to build one or two, but that's clearly unrealistic. It's not a standard unit, and it doesn't even have an independent STC Template.
However, Iax still considered adding transformation mechanisms to these Elatana Armed Sentinel. After all, tearing off the heads of Necrons is indeed a highly efficient way to eliminate them.
Compared to long-range weapons, which consume extremely high energy to destroy or disassemble them.
Perhaps creating a special unit covered in Mechanical Claw would be better for head-to-head combat.
However, after repeatedly checking the internal data, although Iax found a large mechanical component codenamed B-8, he still abandoned this somewhat outlandish concept. B-8 was an auxiliary AI used to assemble heavy units. Its appearance was similar to a natural creature from Ancient Earth, scientifically known as Castellan. With its numerous flexible support structures and multi-directional Mechanical Claw, it was not suitable for any battlefield environment. The design without shields could not withstand Gauss Beam.
Such an overly obvious target makes it easy to be focused down, and the close attack range and lack of shields make it easy to become useless on the battlefield.
Looking at these Elatana Armed Sentinel, which resembled miniature Exindio Robot, Cawl's remaining biological eyeballs almost popped out. Although their upper half did not match the records, and although he did not know what the original Exindio Robot was called, the terrifying combat machines before they were modified by the Imperium were indeed similar in form.
Cawl was unaware that the Exindio- class and the Elanata- class were not the same thing at all.
Its characteristics include rudimentary weaponry, low energy consumption, and low resource depletion.
If the goal is to build a Ravager armed reconnaissance robot, relying solely on this Necrons and the few metal spare parts he brought would be insufficient, even if it could replace part of the structure, as there would still be a lack of other materials.
After all, while the Ravager is more lethal and destructive, as a reconnaissance model it requires additional power and is equipped with many additional modules.