<!--go-->
Speaking of BE Company, many Chinese people will feel very unfamiliar.
In addition to people in the industry, there is only one place where many people are familiar with BE Company, and that is "Leek Field", where the leeks are green and green, and they are cut over and over again. Leek Field tortured me a thousand times, but our poor leek still treated her like first love. Well, that's right, Leek Field is the stock market.
The stock price of BE Company is really at a very strong and low price, which is outrageous!
From the time it was listed to the present, it can also be said that it has been decades. Except for the rise when it was first listed, it has never risen until now. It has been falling to the limit. I don't know how many retail investors have been trapped.
I remember back then, when Zhou Feiyu just graduated, I heard that BE Company had invested in Luzhou to build the world's highest 10.5th generation TFT-LCD production line, which had a promising future, so I bought a share of BE Company's stock. As a result, I lost money and had my tail cut off, so I reluctantly quit.
Later he figured out that he was still too naive.
BE Company has not yet reached its high point, and is far from being the rival of Stick Country Mobile Phone Glass, the manufacturing giant Samsung, so it is not yet time to report high profits.
Every time there is financing or good news, most of it is that BE Company is short of money again and needs to raise funds from the stock market to replenish its blood. Otherwise, it will not be able to get the money to invest in so many advanced production lines. Each production line, whether it is TFT-LCD, OLED, or Flexible AMOLED production line, requires tens of billions of funds.
In addition to BE Company's own revenue and state subsidies, only the stock market can raise so much funds.
It is difficult for other investment banks or the companies of the richest man to switch to BE operations.
Looking at those Internet companies, burning hundreds of millions, billions, or tens of billions of money, it sounds very huge and prohibits countless people. But comparing the operation of BE, it can only be said that it pales in comparison and is completely inadequate. A production line only costs tens of billions to start, and the subsequent labor, raw materials, research and development, investment, etc. have not yet been calculated.
This is the horror of high-end industry!
Therefore, industrial upgrading, the third industrial revolution, Intelligent Manufacturing 2025, etc. can really only happen in China or Eagle Country. It can even be said that the progress of larger-scale industrial systems in the future can only happen in China. The investment is really too huge. In addition to funds, this huge amount of human resources also requires mountains and seas.
Without hundreds of billions or trillions of funds, and without millions of engineers worth over RMB 100 million, how can you carry out higher-level industrial system changes?
Luzhou, BE Company.
In a large office, a group of people were having a fierce quarrel.
"... There are so many defective products in the recent trials. They all have poor display effects and residual images. There must be problems. It cannot be defective for no reason. Have your R&D personnel looked at the raw materials? Have you Technology Department checked whether there is a problem with the process?"
The project boss Qin Wei is very annoyed. Zhong Zheng Company's newly developed Dual Punch-Hole Screen project uses their glass, and he is responsible for the docking.
I originally thought that this kind of mid-to-low-end project would be within easy reach for them. After all, Luzhou and BE Company have the top production lines in the world. He never expected that there was no problem with the supply during the sample stage, but now that it was in the trial production stage, defects occurred continuously during the trial production stage. He was suddenly under great pressure.
For a Mobile Phone Glass, during the sample or trial production stage, a certain number of samples will be produced first, and only after confirmation that there are no problems will the remaining quantity be released. This kind of first production is called trial delivery.
According to past experience, Dual Punch-Hole Screen has done a lot, and there should not be continuous failures.
But it happened this time, and I tried casting four or five times in a row, but couldn't solve it.
The person in charge of the Research and Development Department said with some helplessness, "All the raw materials are consistent with the samples. We verified the same materials, different brands and different batches one by one, but the result was that the afterimage problem could not be solved. I wonder if there is a problem with the equipment or the process parameters."
As soon as these words came out, the person in charge of the Technology Department immediately stood up with a look of displeasure and retorted, "Impossible, we have checked it all, whether it is equipment or process parameters, they are no different from the samples. We also verified different process parameters and wire bodies, but the results They are all the same. I think this must be a batch difference in the incoming materials of PI Film. The problem of image retention occurs because the performance of PI Film is not up to standard and changes occur when passing through the line, causing problems with the liquid crystal molecules."
The quality manager who participated in the review looked at the three of them and continued to lower his head to watch the operation of the mobile phone.
It has nothing to do with him, so it's better not to get involved so as not to get angry.
As the person in charge of the project, Qin Wei felt annoyed and helpless when he heard that the two people were talking about the public and the mother-in-law were right.
The R&D and craftsmen are all professionals, and they are much more professional in the R&D and production of glass than this project. They all said that it was no problem and that they were reasonable, so he just took it easy.
No matter what, as the project leader, he is ultimately responsible for the performance of the project on the client side.
R&D and technology are within the factory, not externally.
"Just now you said there are batch differences in the incoming materials of PI Film?"
After all, Qin Wei was clear-headed and did not get into trouble. He noticed what the person in charge of the Technology Department said, and he tended to believe the person in charge of the Technology Department in his heart. After all, R&D is just design, and products are made by craftsmanship. The opinions of craftsmanship are undoubtedly more weighty.
"Yes."
The person in charge of the Technology Department nodded.
Qin Wei immediately asked the person in charge of the Research and Development Department: "Have you tried other batches of PI Film?"
When the person in charge of the Research and Development Department heard what he said, he immediately knew that Qin Wei believed in craftsmanship and not him. His expression immediately changed and he said angrily, "Of course I tried it. Didn't I just say it? It still doesn't work. It's the same problem."
Qin Wei was scratching his head now. "Then what should we do now? Everyone, let's talk about it. Things can't come out, and the delivery date is delayed. I have to give Zhong Zheng Company an explanation. Everyone has no idea. I can only make up a reason to reply to Zhong Zheng Company first."
The person in charge of the Research and Development Department was startled when he heard this, and then smiled bitterly.
The person in charge of the Technology Department is not in the mood to argue with the R&D people now. Zhong Zheng Company is not easy to fool.
It was the person in charge of the Quality Department who broke the deadlock. He coughed and said, "Let's talk to Zhong Zheng Company directly and ask for their opinions."
Qin Wei looked at everyone present and saw that no one else had anything to say, so he said, "Do you all agree? If you agree, I will..."
The person in charge of the Research and Development Department interrupted him, "Wait a minute, I remember that Zhong Zheng Company recommended a PI Film and said it wanted to verify it on this project. How about we try it first?"
Qin Wei's eyes suddenly lit up and he said quickly, "Since it was recommended by Zhong Zheng Company, let's try it first."
Technology Department The person in charge twitched his lips slightly and wanted to voice his objections, but he hesitated and decided to let it go. Let's try it out first.
Under normal circumstances, any New Material must be developed and process verified before it can be used in BE projects, even if it is given by the customer.
But now, they have run out of options and can only give it a try first.
<!--over-->