"The main problem with costs is the lack of mature, fully automated production equipment."
Alita also gave Chu Feng's answer.
This Bionic Arm can be considered to be purely "handmade".
"What's still missing?" Chu Feng looked at the Engineering Robot that was still working hard and diligently, constantly building another Bionic Legs body. It was indeed quite slow, and it was impossible to use it for large-scale promotion.
"Biological Material Synthesizer, Graphene Production Machine, Ultra-precision Wire Drawing Machine, Nano-capacitor Manufacturing..."
"Stop, stop, stop!"
Chu Feng quickly called a halt to what he was about to say about Alita, as Chu Feng was already completely confused by what he had just heard.
Indeed, nothing comes from nothing; there are simply too many things involved. Every high-end product is manufactured from small, basic elements, just like building a house. You need to lay a good foundation to build a tall building.
However, the most widely used technology is Graphene. Whether it's Graphene chips, Graphene heat dissipation devices, or Graphene batteries, a large amount of Graphene is required.
Graphene, as a popular material that countries around the world are accelerating their research on, many countries have established Graphene- related technology research and development centers to try to commercialize Graphene and obtain potential application patents in industrial, technological and electronic fields.
Various researchers are exploring different methods across different fields to prepare high-quality, large-area Graphene materials. Through continuous optimization and improvement of Graphene preparation processes, they aim to reduce the cost of Graphene production, enabling its superior material properties to be more widely applied and gradually moving towards industrialization.
The excellent properties of Graphene materials and their potential applications offer broad prospects in many disciplines such as chemistry, materials science, physics, biology, environment, and energy.
The Graphene chip production technology I provided to Huawei last time used the Micro-mechanical Exfoliation Method, which uses a special transparent tape to press highly oriented pyrolytic graphite sheets onto other surfaces and peel them off multiple times, eventually obtaining single-layer or multi-layer Graphene.
Micromechanical exfoliation is a simple method that produces high-quality samples, and it is currently the main method for preparing single-layer high-quality Graphene.
However, Graphene produced in this way is small in size and expensive, and can only be used as a chip carrier, making it unsuitable for large-scale production.
The first method that Origin is now preparing to use to produce Graphene is Chemical Vapor Deposition (CVD) Method). Hydrocarbons such as methane and ethanol are introduced into the surface of a metal substrate, Cu or Ni, which is heated at high temperature. After the reaction continues for a certain period of time, it is cooled. During the cooling process, several layers or a single layer of Graphene will be formed on the substrate surface. This process includes two parts: the dissolution and diffusion growth of carbon atoms on the substrate.
This method is similar to Metal-catalyzed Epitaxial Growth Method, but it has the advantage of being able to be carried out at lower temperatures, thereby reducing energy consumption during the preparation process. Furthermore, Graphene and the substrate can be easily separated by chemically etching the metal, which is beneficial for subsequent processing of the Graphene.
However, a large amount of metal minerals are needed, and Chu Feng's previous mineral production base in Mogadishu will come in handy.
Modern society does have such methods, but the current chemical vapor deposition method is quite complex in the later stages of Graphene transfer and has a high preparation cost. In addition, there are often defects in the growth and connection within the substrate.
However, the technology from which it originated did not have this problem.
This is a method for manufacturing transparent conductive Graphene. When producing other Graphene materials, the method of cutting graphite is simply used to obtain Graphene materials.
Using Focused Ion designed by Origin to cut bulk graphite into the desired Graphene material, neither oxidation nor reduction is required, thus ensuring the structure and integrity of the Graphene.
It sounds simple, but to actually achieve this, the production of Graphene wouldn't be low, since Graphene is a nanomaterial.
Graphene is a two-dimensional carbon nanomaterial composed of carbon atoms arranged in a hexagonal honeycomb lattice with sp hybrid orbitals, and 1 millimeter thick graphite contains approximately 3 million layers of Graphene.
A light scratch of graphite on paper can leave several layers of Graphene, with each Graphene less than a nanometer thick!
Individual bacteria are invisible to the naked eye; their diameter is approximately five micrometers when measured under a microscope.
Assuming a human hair has a diameter of 0.05 millimeters, and if it is axially divided into 50,000 strands, the thickness of each strand would be approximately 1 nanometer. That is to say, 1 nanometer is 0.000001 millimeters.
Graphene is even thinner than this!
Therefore, the precision required for manufacturing machinery is not merely at the nanometer level; it must reach the atomic level! Otherwise, it would be impossible to peel off the raw material of Graphene, and the precision of the peeling machinery must reach an unbelievable level!
The overall precision of a mechanical system is determined by the precision of each component within the system. Even a slight error in a gear will result in uneven thickness of the extracted Graphene, rendering it unusable.
The requirements for precision in industry are sometimes very demanding.
For example, there are many short videos nowadays, and everyone can see many seemingly seamless parts that are completely indistinguishable from two separate entities to the naked eye.
However, with a magnifying glass, you can see that the traces are quite large.
If you want a smooth surface, you will need to use sandpaper to slowly polish it.
But once it's polished, is it really okay?
If you look at it with a 20x magnifying glass, you'll find that the surface of the material sanded with sandpaper is still the same as before, still uneven.
If further polishing is needed, finer sandpaper will be required, but under an optical microscope, it will appear as uneven surfaces.
Next, polishing compound is applied and the material is slowly ground, but under an electron scanning microscope, it appears as "a mountain range from different angles."
Just like the world's top-of-the-line lenses, such as those used in Lithography Machine machines or astronomical telescopes, these lenses are all hand-polished.
With the current level of industrialization worldwide, it is not yet possible to achieve fully automated, high-precision lens grinding!
Level 8 fitters are considered national treasures in any country. The level Level 8 Machinist fitter classification used in the past was the highest level.
These are absolute technical elites; ordinary people can't achieve this level without decades of hard work.
"It takes three years to become a skilled lathe operator, and ten years to become a mediocre fitter." This is a common saying, but it also shows how rare and difficult it is to become Level 8 Machinist.
Since the 19th century, the development and popularization of various machine tools have gradually enabled most benchwork to be mechanized and automated. However, benchwork remains a widely used basic skill in the process of mechanical manufacturing. Benchwork operations such as scribing, scraping, grinding and mechanical assembly still cannot be completely replaced by suitable mechanized equipment.
Some of the most precise templates, molds, gauges, and mating surfaces (such as guide rails and bearings) still require precision machining by hand.
Even in Japan, where automation is highly advanced, the manufacture of ultra-precise optical instruments still requires meticulous manual polishing. This is due to the fact that modern machinery, in terms of both precision and break-in process, cannot match the level of manual work.
Even now, Origin Company can only manufacture these machines by having Engineering Robot grind and produce the parts one by one and then assemble them. So, although this method is good, it still takes some time.