Of course, it's not perfect either; the five-axis linkage machining center has one drawback.
The drawback is that the side of the worktable that clamps the part cannot be processed. If you want to continue processing, you have to take the part off first, then flip it over and clamp it again.
However, this has a drawback: because the position of your parts changes, the relevant parameters will also change, ultimately leading to a decrease in machining accuracy.
In addition, many parts are quite heavy, and it takes a lot of effort to reassemble them, which ultimately reduces the production efficiency of a machine.
The best way to solve this problem is to develop a mechanical system that automatically flips the parts.
In the field of CNC machining center, this is called a 'seven-axis linkage machining center' or 'nine-axis linkage machining center'.
Its disadvantage is that the price and complexity are far greater than those of a five-axis CNC machining center. After all, as the mechanical complexity increases, the price will naturally skyrocket.
At this point, Lin Feng undoubtedly wanted to develop a five-axis linkage machining center, because a nine-axis linkage machining center is derived from a five-axis linkage machining center.
Therefore, you first need to have a basic embryo before it can evolve into a seven-axis or nine-axis machining center.
If you start with a nine-axis linkage machining center right away, the development difficulty will be too high, and it will not be easy to get results quickly.
Therefore, Lin Feng decided to first create a five-axis linkage machining center, and then upgrade the nine-axis linkage machining center by upgrading the panel.
Developing a five-axis linkage machining center can be easy or difficult, depending on the circumstances.
It is easy because Great Xia attaches great importance to the research and development of high-end machine tools, especially five-axis linkage machining centers.
Therefore, decades later, the Great Xia version of the five-axis linkage machining center has long been developed and produced.
After all, this thing was fully finalized and put into practical use in the 1980s, Great Xia also initiated the research and development of a domestic five-axis linkage machining center at that time.
So, after more than 20 years, in 2005, the five-axis linkage blade machining center developed by Beijing Institute of Mechanical and Electrical Engineering won the first prize for scientific and technological progress.
After that, with the first unit, the second and third improved models naturally sprang up like mushrooms after rain.
By 2013, Great Xia's five-axis CNC machining centers were already available for sale overseas, making it one of the major exporters of five-axis CNC machining centers.
But this is only superficial. In reality, the five-axis linkage machining centers produced by Great Xia are only in the low-to-mid-range market due to machining accuracy issues.
Furthermore, these five-axis machining centers are more or less dependent on others in their core aspects.
They either have a problem with the cutting tools, the testing instruments or sensors, or the CNC system.
Under such circumstances, although Great Xia's five-axis linkage machining center was developed, it was still subject to the control of others to some extent.
And to be honest, there are many of the most advanced technologies that machine tool factories in Great Xia cannot purchase.
The end result was that even a skilled cook cannot cook without rice. Although Great Xia's five-axis linkage machining center was developed, it could only be used in the low-to-mid-range market due to the problem of parts machining accuracy.
Therefore, although Great Xia can now produce five-axis linkage machining centers and even export them to earn foreign exchange, it mainly focuses on the low-to-mid-end market.
Among these, Lin Feng wants to develop his own five-axis linkage machining center.
In fact, we can learn from the experience of other Great Xia five-axis linkage machining centers and combine it with our own advantages to achieve miraculous results.
As for what my advantages are?
Xingtu Technology's advantage lies in having the Artificial Intelligence Jarvis!
The field in which the Artificial Intelligence Jarvis is best suited is not company management, but the production field, especially the metal processing field.
Because the Artificial Intelligence Jarvis can use massive computing power to simulate the entire production and processing process in advance, and calculate the fastest and most efficient metal processing production steps.
Then, countless production simulations were conducted to compensate for mechanical precision, and the precision of the parts produced in the end far exceeded the highest precision that programmers could achieve.
After all, due to the limitations of the human brain, there is no way to simulate the complete parts manufacturing process in the brain.
While humans can use their experience to figure out how to produce high-precision parts, it still seems somewhat inadequate compared to Jarvis's complete simulation.
Furthermore, a greater advantage is that humans want to use five-axis machining centers to process a very complex part.
They need to use software programming to control and arrange each machining production step of the five-axis linkage machining center according to the drawing requirements on the computer.
This programming process usually takes several days or even a week.
Meanwhile, the Artificial Intelligence Jarvis possesses powerful computing capabilities.
Tasks that would take humans days or even a week to complete might only take Jarvis a few seconds or minutes to finish.
This is the huge advantage of applying the Artificial Intelligence Jarvis in the field of metal processing.
Of course, this can be done by quickly generating machining steps based on the requirements of the part drawings.
However, the most powerful aspect of Jarvis's Artificial Intelligence lies in its ability to simulate the parts manufacturing process countless times in advance to improve accuracy.
The most powerful aspect of the Artificial Intelligence Jarvis is its unparalleled learning ability!
Because of its unparalleled learning ability, the Artificial Intelligence Jarvis constantly tries to adjust the part processing model every time a part is produced.
Ultimately, through continuous production, debugging, and processing of the model, as the number of times the part is produced increases and more data is acquired, the precision of the parts that Jarvis can produce will become higher and higher.
Ultimately, the highest possible machining precision is achieved, and from then on, all parts produced will be of the highest precision. This is what is known as "human-machine integration".
Therefore, the application of the Artificial Intelligence Jarvis in the field of metal processing is truly remarkable, and other manufacturers cannot compare at all.
Of course, while the application of Artificial Intelligence Jarvis in the field of metal processing is incredibly powerful, it still requires a solid foundation in five-axis machining centers.
This Artificial Intelligence Jarvis is like a scoring device. A five-axis machining center that could originally achieve a score of 60 may eventually reach 80 or even 90 points thanks to the 'human-machine integration' of the Artificial Intelligence Jarvis.
But what if there was a five-axis linkage machining center that could originally achieve 100% accuracy?
With the 'human-machine integration' effect of the Artificial Intelligence Jarvis, it will definitely be able to achieve an incredible score of 120 points or even higher.
Therefore, the key to everything still lies in Lin Feng's rapid development of a five-axis linkage machining center that can achieve a perfect score of 100, so that he can ultimately create an incredible miracle in the eyes of the world.
As for how to quickly develop a five-axis linkage machining center that can achieve a score of 100, Lin Feng only needed to think about it briefly before he came up with a solution.