The Press Conference Begins: The Industry 4.0 Era?
As for the method, it is to use the Source Points to quickly obtain product knowledge.
The Source Points is a system different from experience points. It is less costly than experience points because it does not require the creation of a physical product; it only provides knowledge.
The Source Points correspond to technologies and products with different R&D difficulties, and the Source Points consumed are also different.
In general, the principle remains the same: the higher the difficulty of developing a technology product, the greater the Source Points required.
Over the past few years, he has used the Source Points several times, and the current maximum limit for Source Points has been increased to 50 million.
I wonder if we can directly obtain knowledge about five-axis linkage machining centers using the Source Points this time?
Driven by curiosity, Lin Feng bid farewell to Liang Mengsong and began to formally study the knowledge of other five-axis linkage machining centers around the world, preparing for the development of his own five-axis linkage machining center.
The reason we still need to learn is that the Source Points still follows an unspoken rule.
In other words, the more knowledge Lin Feng possesses, or the lower the difficulty of developing the technology currently, the lower the cost of upgrading experience points.
Furthermore, when Lin Feng has a concept for the technical development of a product to be upgraded or when he promotes it, he deliberately favors that direction, and the upgraded product will be upgraded in that direction.
Therefore, after learning that the primary task was to develop a five-axis linkage machining center, Lin Feng did not immediately begin using the Source Points to acquire knowledge about five-axis linkage machining centers.
Instead, we first learn about five-axis machining centers worldwide and other mechanical processing technologies.
Only after a specific development plan for a five-axis linkage machining center was developed did the Source Points acquire relevant manufacturing knowledge.
Fortunately, thanks to the Third-generation Gene Enhancement Potion, Lin Feng's IQ reached 230, giving him not only strong memory and comprehension abilities.
Thanks to the characteristics of hummingbird genes, they possess a brain-overclocking ability, with a thinking speed and problem-solving speed several times faster than others.
Finally, Lin Feng deliberately reduced his sleep time, sleeping less than seven hours a day.
So in just two weeks, Lin Feng became one of the experts in the field of five-axis linkage machining centers.
As a result, the plan for developing Xingtu Technology version of the five-axis linkage machining center is becoming increasingly clear.
Finally, on December 19, 2015, Lin Feng used the Source Points to realize the technical knowledge of the five-axis linkage machining center.
Then, in a split second, the 50 million Source Points were instantly cleared, and Lin Feng 'Lin Feng mind was flooded with an enormous amount of information, making him feel dizzy.
Sensing the knowledge in his mind, Lin Feng's smile grew wider and wider, because according to the knowledge in his mind, the Star Path five-axis linkage machining center perfectly achieved his vision.
However, Lin Feng soon found himself in a predicament, because although it was possible to manufacture a five-axis linkage machining center with the current materials and processing technology of Great Xia.
However, the problem is that he had to personally create the mechanical drawings for the five-axis machining center and the model library on how to enable the Artificial Intelligence Jarvis to control the five-axis machining center.
Thinking of this, Lin Feng smiled wryly and quickly started working, drawing up mechanical parts drawings for relevant factories to process while also busy training the Artificial Intelligence Jarvis.
Time passed slowly, and in the blink of an eye, 2015 was over, and we arrived at the even more magnificent January 12, 2016.
On this day, Lin Feng quietly released a new video, which, with the help of top-tier traffic recommendations, saw its views skyrocket.
"Hello everyone, it's been several months since we last met."
Lin Feng greeted the netizens, and then, without waiting for their reactions, Lin Feng revealed the theme of the video.
"The product I'm going to introduce today is not for the consumer market, but for the mechanical processing industry."
As for what this thing is? This thing is the Xingtu five-axis linkage machining center!
"A five-axis machining center?"
Upon hearing Lin Feng's words, netizens around the world who watched the video through the four major video websites, Bilibili, YouTube, YouTube, Tencent Video, immediately showed expressions of disappointment.
Because five-axis machining centers are no longer considered Black Technology in this day and age.
Even Great Xia, a region that was once very backward, now has its own five-axis machining center. Of course, five-axis machining centers are nothing special in this era.
Although only a handful of countries can actually produce five-axis machining centers, it is a fact that this is not some kind of cutting- Black Technology.
Disappointed, many people considered turning off the video.
After all, what's so interesting about a video of a five-axis machining center, an outdated machining product? It's better to just turn it off.
But before netizens could actually turn off the video, Lin Feng's words in the video instantly made them stop in their tracks, and a sense of curiosity arose in their hearts.
"I wonder if everyone has heard of Industry 4.0?"
Industry 4.0 has been around for more than five years since it was first proposed in theory. The so-called Industry 4.0 is the Fourth Industrial Revolution!
Industry 1.0 was the Steam Engine Era, Industry 2.0 was the Electrification Era, and Industry 3.0 is the Information Era.
Industry 4.0 is an era that uses information technology to promote industrial transformation, also known as the Intelligent Era.
Simply put, the manufacturing sector will become highly networked, intelligent, and automated, meaning that fully automated production machines and robots will be used on a large scale.
This process was made possible by the use of fully automated production equipment and robots that could operate around the clock.
Human productivity will explode on a massive scale, and ultimately everyone's life will be better, just like the previous industrial revolutions.
Of course, this process of change will inevitably be accompanied by growing pains.
Because many workers find that, apart from basic labor, they have no way to overcome the production efficiency and labor costs of machines.
If ordinary workers want to adapt to the Industry 4.0 era, the only option is to study hard.
Then become a repairman, engineer, quality control engineer, R&D personnel, scientist, or salesperson in a fully automated factory.
Alternatively, one could switch to other industries, such as scientific research, the internet industry, programming, finance, entertainment, or services...
There will be a short, painful period during this process, but after the pain comes a bright future for the workers.
Because of the explosive increase in productivity and the massive reduction in production costs, it also means that resources can be collected to a greater extent and at a lower cost.
Many development projects that were originally in harsh environments or costly, such as those located in space, deserts, Gobi, oceans, seabeds, and deep underground resources, can now be undertaken.