Mechanical Arm Operating and Production Costs
Shen Yang is in charge of the technology R&D department and Artificial Intelligence research department of Visoft, and mainly promotes the company's medium and long-term overall technology strategy, tactics and forward-looking research and development.
Whether the Artificial Intelligence Jarvis or the Mechanical Arm that Lin Feng claims to have developed is real or not, it will undoubtedly have a profound impact on the future.
So when Microsoft CEO Nadella was preparing to send someone to check on Xingtu Technology, Shen Yang volunteered to come over himself.
Faced with the question from Shen Yang, Vice President of Microsoft, Lin Feng pondered for a moment before explaining in front of the experts, reporters, representatives, and millions of viewers on Bilibili and Douyin live streams:
"This Mechanical Arm is very expensive, both in terms of purchase and usage costs, for three main reasons."
The first aspect is the cost of Supercomputer computing power and data traffic.
Because the Artificial Intelligence Jarvis needs to analyze the surrounding environment in real time based on cameras and various sensors, this requires the computing power of Supercomputer and a large amount of data usage.
Considering the purchase and construction costs of Supercomputer, as well as their daily maintenance, usage, and depreciation costs.
Add to that the data usage fees that occur every moment, and these costs will naturally be factored into the final price.
The second aspect is materials.
Because our Mechanical Arm uses high-performance alloys, high-end sensors, and high-performance chips, which are all relatively expensive, its cost is inherently high.
The third aspect is processing and assembly.
Leaving aside high-end sensors and high-performance chips, let's just talk about the metal processing of high-performance alloys.
Because they all use high-performance alloys and require high precision, the processing and production costs are naturally relatively high.
Therefore, with all these costs added up, the Xingtu Z1 Robotic Arm has very high production, material, and even daily operating costs, making it difficult to use in large-scale industrial production.
Upon hearing Lin Feng's words, the millions of netizens in the live stream breathed a sigh of relief.
Fortunately, this thing is too expensive to be widely adopted; otherwise, if Lin Feng's Mechanical Arm were real, it would have forced many people to lose their jobs.
"Is that so?"
Shen Yang, Vice President of VivoSoft, nodded.
Lin Feng's words were within his expectations. After all, while multi-joint Mechanical Arm have many advantages, Mechanical Arm control precision is poor precisely because they have too many joints.
Improving control precision would require significantly higher material and production costs, which is why so many of the world's top companies have not entered this field.
Even if it were developed, it would be useless because the production cost is too high. It would be better to spend the money to hire more skilled veteran workers.
However, when Shen Yang nodded, Jiang Lan, an expert in the field of intelligent manufacturing, looked rather unhappy.
He was quite pleased when he heard Lin Feng talk about the precision of machining control, and that it could really achieve the level he claimed.
Hearing that both manufacturing and usage costs are high means that Mechanical Arm can only serve a niche market at best.
It is a regrettable fact that we cannot fully usher in the era of intelligent manufacturing.
"Alright, ladies and gentlemen, let's begin the test. First, we'll test the laser engraving process."
To prevent you from accusing us of Xingtu Technology, several of your experts can discuss the laser engraving task and then assign the processing task to our Artificial Intelligence, Jarvis.
Lin Feng was quite confident when he said this.
Although it doesn't have the real Artificial Intelligence Jarvis, the native software of the fourth- Pen Master is quite powerful and versatile.
Finally, with his modifications, using it to produce or process something would be an extremely simple matter.
"Good."
Upon hearing this, the experts began to discuss it among themselves.
Considering that they only had one robot and couldn't make anything too complex, they decided on a laser engraving task.
The laser engraving task is to carve a five-pointed star at varying depths.
By measuring the length and depth of each point of the pentagram, they can determine whether the laser engraving accuracy is between 0.02mm and 0.04mm.
Lin Feng naturally had no objection to this, because the laser engraving task was within the processing capabilities of the Mechanical Arm and control software.
After they finalized the size requirements, Lin Feng the task sheet and left.
The reason given for leaving was that he wanted to pass on the mission objectives to the Artificial Intelligence Jarvis, so that Jarvis could perform automated carving according to the mission requirements.
In response, experts in the field of Artificial Intelligence at the scene found the need for manual data input somewhat surprising.
However, considering that the processing field is different from chat and Q&A, every item to be processed is so complex that Artificial Intelligence cannot guess human thoughts, so it is normal to need to manually input processing requirements.
Fortunately, Lin Feng didn't keep them waiting long. In less than a few minutes, Lin Feng returned to the workshop with a thin metal plate in his hand.
The thin metal plate was placed in the designated position, and at that moment, the voice of the fake Artificial Intelligence program Jarvis also rang out.
"Sir, may we begin?"
"Let's begin."
As Lin Feng spoke, the Mechanical Arm began to work automatically, with the laser head at the front of the arm continuously emitting blue lasers that bombarded the thin metal plate.
Throughout this process, experts, representatives from other companies, and journalists kept watching the robotic arm at work.
During this process, they would occasionally use their arms to shield their eyes from the glaring purple light.
After all, the laser above is quite dazzling, and staring at it for a long time could blind you. As for how long the laser engraving will take...
The laser engraving process actually takes quite a bit of time.
Because it doesn't just require creating a five-pointed star pattern; the five points of the five-pointed star also have different depths.
So don't be fooled by the fact that the task is just carving a five-pointed star; the actual task is quite demanding and takes a considerable amount of time.
However, the people at the scene and the netizens in the live broadcast room did not seem very impatient, but patiently waited for the Mechanical Arm that kept flashing the bright blue laser.
At this moment, when the camera turned to him in the live stream, Lin Feng smiled and said:
"Actually, using a robotic arm for flat carving is not the best choice, because our Mechanical Arm are better suited for carving three-dimensional objects, and carving flat panels is a bit of a waste of their potential."
If it's a carved flat panel, then Partial Frame Structure like the Third-generation Pen Master Handwriting Robot would be more suitable.
This structure is more stable and has higher operational accuracy.
In theory, if the Third-generation Pen Master Handwriting Robot is modified by adding a laser engraving head to become a laser engraving machine, its planar engraving precision would actually surpass that of Mechanical Arm.
The expected machining accuracy is around ±0.01mm, making it more suitable for machining ultra-precision parts, as well as carving metal and wood ornaments or trademarks.
Upon hearing Lin Feng's words, many businessmen in the live stream had their eyes light up, discovering a business opportunity, because what Lin Feng proposed seemed to have great potential.
In fact, if they search on Taobao, they will find that the products Lin Feng mentioned are already available on the market.
After all, the research and development threshold for this thing is very low. It's simply a matter of replacing the pen of Handwriting Robot with a laser head to repeatedly write a 'character'.