Skip to main content
  • Home
  • Library
  • Read
    • Popular
    • Charts
    • Browse
    • Categories
    • Wikis
    • Glossary
  • Request
  • Activity
  • Leaderboard
  • Help
Our Apps
  • DaoSearch
  • Narratorr
Social
  • Discord
  • Patreon
Tech Nation: My Creations Have Upgrade Panels
Chapter 84

Unbelievable Precision!

1,369 words 5 min read 2 views 2mo ago Source ​
Skip to the end of the chapter
Prev
Next

Therefore, in theory, a capable individual developer can also develop a laser engraving machine on their own, which shows how low the barrier to entry is.

Of course, although the barrier to entry is low, there are no well-known companies doing this right now; it's mostly small companies with a few or a dozen people doing these things.

Among these, those smaller companies also infringed on some of Xingtu Technology's technology patents.

Although one is a laser engraving machine and the other is Handwriting Robot, they have the same structure. It is very difficult for them to avoid infringing on the one-line structure and the Partial Frame Structure.

However, Xingtu Technology doesn't have the resources to deal with them, and the investors haven't matured yet. If Xingtu Technology wanted to deal with them, they could easily do so based on the fact that they infringed on technology patents.

At that point, they will either have to pay a loss or give up company shares in exchange for licensing the relevant architecture patents!

This is also the plan of Qu Qiongying, general manager of Xingtu Technology, since Xingtu Technology does not currently have the resources to enter the niche market of laser engraving machines.

If we could use patent licenses with a linear or frame-like structure to acquire a large stake in a promising company in the laser engraving machine field, that would be a good deal.

After all, the market for laser engraving machines is too small and doesn't offer much financial potential, so Xingtu Technology can't afford to waste time and energy on such things.

Of course, Lin Feng's purpose in bringing up this topic was not to remind others that they could enter the field of laser engraving machines, but rather to imply something:

"Simply using planar laser engraving cannot fully utilize the capabilities of our Xingtu Z1 Robotic Arm, so I decided to add a few more features to showcase its greatest strengths."

As Lin Feng finished speaking, a staff member handed him a specially made 'I'-shaped metal block.

"This is an 'I' shaped metal block. If you want to use the modified Third-generation Pen Master Handwriting Robot to carve the same five-pointed star on both sides inside this thing, it would be a disaster."

But this was a piece of cake for our Xingtu Z1 Robotic Arm, so I decided to do something extra: laser-engraved a five-pointed star, as determined by the experts, on both sides inside this "I"-shaped metal block!

"Whoosh!"

Upon hearing Lin Feng's words, the scene erupted in an uproar.

Meanwhile, the live stream was filled with shocked comments.

"My God, Lin Feng is really crazy, he actually went so far as to add dishes to make things difficult for himself!"

"Wow, that's incredible! Lin Feng actually did that!"

"Amazing! Lin Feng is amazing."

"I don't think this level of difficulty is a problem for the Mechanical Arm, after all, it has six-axis machining capabilities."

It's just that carving on a flat surface is rather simple; those experts probably didn't want to make things too difficult for Lin Feng, so they only gave him a basic task.

"That's right, the level of difficulty that Lin Feng proposed at this time is in line with the level of difficulty that Mechanical Arm should have."

"Regardless of the circumstances, Lin Feng's act of deliberately increasing the difficulty deserves applause!"...

Upon hearing Lin Feng's words, everyone in the live stream became excited and started discussing it animatedly.

They were incredibly impressed by Lin Feng's decision to increase the difficulty of the challenge, praising Lin Feng as amazing and saying Lin Feng truly lived up to his Lin Feng.

Lin Feng was unaware of what was happening in the live stream. As soon as the laser engraving was completed, he used his tools to take out the thin metal plate and put it in water to cool it down.

Lin Feng then placed the 'I'-shaped metal block in its designated position without hesitation, and with a prompt from the fake Artificial Intelligence Jarvis, issued the command to begin work.

At the same time, the people at the scene and the millions of netizens in the live broadcast room were not interested in paying attention to the metal block with the word "I" being carved.

Their attention was entirely focused on the thin metal plate that had been carved earlier, since the plate was now complete and ready for testing.

I wonder if the laser engraving precision of this Mechanical Arm can really reach 0.02mm to 0.04mm?

The experts, company representatives, reporters, and even millions of netizens in the live broadcast room all looked on with anticipation and curiosity.

"Let me take the measurements."

Jiang Lan, an expert in the field of intelligent manufacturing, snatched the thin metal block and picked up a digital caliper produced by Japan's Mitutoyo Corporation, which has a measurement resolution of 0.001mm and an actual measurement accuracy of 0.005mm, and began to measure.

Despite their displeasure at being allowed to take the measurements themselves, many experts at the scene did not argue with Jiang Lan but instead let him take the measurements first.

As for the people at the scene or the netizens in the live broadcast room, their expressions varied. Some of them could understand the measurement parameters on the screen, while others could not.

If you don't understand it, wait patiently; if you do understand it, open your eyes wide.

Based on the parameters displayed on the digital caliper and the parameter requirements diagram that the experts had just discussed on the table, they discovered that the laser engraving precision had indeed reached 0.02mm, with a maximum error of no more than 0.025mm!

As you can see, the standard machining accuracy of the Xingtu Z1 Robotic Arm, controlled by the Artificial Intelligence Jarvis, is between 0.02mm and 0.025mm, not 0.04mm.

It is estimated that the temperature will only drop to 0.04 mm under harsh environmental conditions or certain special circumstances!

Upon learning this result, how could those who know how to use digital calipers not show surprise?

However, the measurement is not yet complete; there is still depth testing to be done, based on the requirements agreed upon by the experts.

The depth of each point in this five-pointed star is different. Only when the laser engraving depth is also qualified can the task be considered complete.

After measuring and writing down the diameter of the pentagram at each angle, Jiang Lan then began measuring its depth.

Ultimately, as expected, the precision of the laser engraving depth was between 0.02mm and 0.025mm, maintaining its consistently stable performance!

As Jiang Lan, an expert in the field of intelligent manufacturing, announced his measurement results, the scene and the live broadcast room were immediately in an uproar, followed by enthusiastic applause.

"Clap clap clap clap clap clap clap..."

As applause erupted, the millions of viewers in the live stream became completely excited, praising Lin Feng Lam as an amazing talent.

At this moment, Jiang Lan's voice, filled with deep emotion, also rang out:

"Speaking of which, Mr. Lin Feng has indeed created a miracle."

It's important to know that there are many companies currently developing Mechanical Arm, such as Fanuc, Yaskawa, Epson from Japan; Kuka from Germany; ABB from Switzerland; Mobis from South Korea; Comau from Italy...

Among the many companies around the world that develop Mechanical Arm, although their repeatability is between 0.01mm and 0.02mm, in actual operation, the best they can achieve is only 0.1mm.

At this moment, the Mechanical Arm controlled by the Artificial Intelligence Jarvis achieved a processing accuracy between 0.02mm and 0.04mm, which undoubtedly broke the upper limit of the accuracy of Mechanical Arm and created a miracle.

This miracle is not only a miracle for our Great Xia, but also a miracle for the whole world. After all, we have raised the processing and control precision of Mechanical Arm to a new peak!

"Clap clap clap clap clap clap clap clap clap..."

As Jiang Lan shared her heartfelt words, the audience erupted in applause once again, cheering for Lin Feng and for the Artificial Intelligence Jarvis and Mechanical Arm Lin Feng had developed.

Upon hearing this, Wang Gaoyuan in the live stream felt as if his face had been slapped repeatedly, his expression turning ashen as if he had swallowed a lump of yellow, unidentified substance.

He had previously ridiculed the so-called Artificial Intelligence Jarvis and Mechanical Arm as jokes, but now, has this backlash come too quickly?

Initial price: 438, Average price: 0.5

End of Chapter
Prev
NovelSummaries
Next

Explore the wiki

Lin Feng
Xingtu Technology
Great Xia
Jarvis

Comments

No comments yet.
AboutStatsAPIChangelogStatusContactPrivacyTermsDMCA
© 2026 RandomTranslator·v3.26·RSS