After the first Nuclear Fission was built, Li Qingsong ran it for a period of time, during which he collected a large amount of data.
Furthermore, Li Qingsong was constantly devoting the collective brainpower of thousands of people to carefully observe every process of its operation, and thinking about how to optimize and improve its performance.
In just a few months, Li Qingsong came up with thousands of optimization details and verified them in the laboratory.
Immediately after that, Li Qingsong began construction on the second nuclear power plant.
In the human world, the construction of every nuclear power plant requires strict approval and research, and the construction of every nuclear power plant is a major event.
Environmental impact assessment, safety, economic efficiency, regional impact, overall layout, and so on—which of these factors doesn't require dozens or even hundreds of expert teams to conduct years of investigation and research, generating tens or hundreds of thousands of investigation documents before a final decision can be made?
But for Li Qingsong, apart from building the nuclear power plant itself, there were no other obstacles or concerns. He could build it whenever he wanted, and at an extremely fast pace.
So the second nuclear power plant was immediately put into operation.
Compared to the First Generation Nuclear Power Plant, this second-generation, and second nuclear power plant, has achieved a large number of detailed optimizations, but mainly in two aspects.
The First Generation Nuclear Power Plant used water as a coolant and neutron moderator. The water carried away heat and heated another part of the water to turn into steam to drive the generator.
However, in this nuclear power plant, the process has been shortened from three to two.
Instead of using water as a coolant to remove heat, Li Qingsong directly heats the water in the reactor core through the fission of Uranium Fuel Rod. While dissipating heat, the water is also directly burned into steam to drive the generator.
Simply omitting one step can directly increase efficiency by more than 20%.
Another area for optimization and improvement is the enhancement of material properties brought about by advances in Materials Science.
Materials Science is a crucial fundamental discipline, and Li Qingsong has never relaxed his research on it over the years.
No matter how many clones he has, Li Qingsong can always ensure that at least 5% of them are engaged in Materials Science research.
Currently, my maximum number of consciousness links is around 5.1 million, corresponding to approximately 250,000 clones working in the materials research base.
All kinds of materials, steel, cement, plastic, heat-resistant, cold-resistant, and so on, are included.
Higher-performance materials allow Li Qingsong to perform fission at a higher rate and transfer energy more quickly, while also improving stability and safety.
The remaining adjustments are distributed across aspects such as overall structure, power stability, and safety redundancy.
In summary, compared to the first generation, the second-generation Nuclear Fission is not only more than 30% more efficient, but also more intelligent and safer.
First Generation Nuclear Power Plant lose 600,000 kilowatt-hours of electricity every day they operate, while Second Generation Nuclear Power Plant lose only about 250,000 kilowatt-hours per day, significantly reducing losses.
Li Qingsong vaguely remembered that the Nuclear Fission in the human world seemed to have developed to the sixth or seventh generation. In comparison, he had only developed to the second generation, and the journey ahead was still long.
"But that's okay, we can take it one step at a time."
With this in mind, Li Qingsong quickly built the second nuclear power plant and, repeating the process he had done with the First Generation Nuclear Power Plant, began observing, thinking, and conducting laboratory verification once again.
While Nuclear Fission power generation technology is progressing rapidly and steadily, Li Qingsong has devoted another part of his energy to another matter.
This matter is equally important. In fact, it could be said that whether we can truly open the door to the interstellar world in the future depends on this technology.
Ion Propulsion technology!
From the Lantu Ke People's spaceships and warships, Li Qingsong confirmed his previous guess.
Ion Propulsion technology, and its advanced technologies: High-Speed Ion Propulsion Technology, is indeed the future direction of development, without a doubt.
The biggest challenges in space travel are energy and working fluid.
During long space voyages, it is usually impossible to obtain supplies from the outside world; everything must be done using the spacecraft's own reserves.
Without a sufficiently powerful energy supply, the spaceship cannot operate. Without enough propellant, the spaceship cannot be propelled forward.
Energy can be obtained through Nuclear Fission and Nuclear Fusion, but there is an upper limit to the amount of working fluid that a spacecraft can carry.
Since the upper limit cannot be increased, we can only try to increase the thrust that a unit of working fluid can provide.
Ion Propulsion technology is designed to solve this problem.
By ionizing the working fluid and then using electromagnetic acceleration, the ions are ejected at extremely high speeds. A tiny amount of working fluid can generate thrust equivalent to a large amount of chemical fuel.
Of course, at this stage, Li Qingsong can forget about High-Speed Ion Propulsion Technology.
While the mothership of the Lantu Ke Civilization certainly had high-speed Ion Thruster, and Momo Lansi and others had long been tamed and were willing to do their best to work for Li Qingsong, they were not experts in this field. At this stage, Li Qingsong's technological strength was also quite limited, and he couldn't even reverse engineer it.
That's okay, we can start with the basics.
Let's first develop the rudimentary Ion Thruster that humanity has already mastered, which can only propel a piece of paper.
Thus, another new research base rose up on the vast and desolate land of Luoshen Star.
Ion Propulsion Laboratory!
Ion Propulsion requires a large amount of electricity. Without hesitation, Li Qingsong built another Power Plant specifically to supply the electricity needed for the Ion Propulsion experiments.
Following that was the research and development of electromagnetic accelerators.
The basic electromagnetic accelerators are relatively simple; for example, the electromagnetic accelerator previously built on Adversary Star was an application of this technology.
However, changing it to accelerate ions presents different technical requirements and significantly increases the difficulty.
"The technology used in Ion Thruster, the Electromagnetic Cannon I will be developing in the future, and the Particle Collider used for Basic Physics research are all based on similar underlying logic."
Once I master Ion Thruster technology, Electromagnetic Cannon and Particle Collider can also enter the preliminary research stage.
Li Qingsong thought to himself, and threw himself into the research with passion and enthusiasm.
With the massive investment of clones and resources and energy, ionizers were gradually developed successfully, breakthroughs were achieved in precision electromagnetic acceleration coil technology, and energy stabilization modules were also made...
After a series of breakthroughs, a colossal cylindrical thruster, weighing over 300 tons and measuring over ten meters in length, finally appeared before Li Qingsong.