Skip to main content
  • Home
  • Library
  • Read
    • Popular
    • Charts
    • Browse
    • Categories
    • Wikis
    • Glossary
  • Request
  • Activity
  • Leaderboard
  • Help
Our Apps
  • DaoSearch
  • Narratorr
Social
  • Discord
  • Patreon
Wizard: I Brought the Wrong System
Chapter 129

Sword Forged

1,294 words 4 min read 12 views 4mo ago Source ​
Skip to the end of the chapter
Prev
Next

When Arro returned to Smelting the iron blocks, he suddenly realized he had done something foolish.

Iron has a higher melting point than silver, and molten iron will melt the Silver Core that was originally outlined!

Should we first make the Steel Blade Body, and then pour in the Silver Liquid?

How to make the hollowed-out part in the middle of Steel Blade Body?

The Hand of Magic Power is constructed with a palm-shaped structure, so it's impossible to create an internal hollow structure!

Unable to come up with a better solution, Arro had no choice but to abandon the one-piece structure and make it into Folding Shape, then carve the hollowed-out shape into it.

However, the hardness of the opening of a longsword made in this way will definitely be affected.

Arro's solution was to make the opening into Alternating Tooth Shape. When closed, the tooth-like structures at the opening would interlock like a zipper, preventing the chopping from creating a direct impact on the notch.

After carving these details, the next step is to complete the third important structure of the Blazing Longsword.

The Heat Dissipation and Steam Release Structure on the sword hilt.

The steel surface of the sword hilt is engraved with concave cylindrical hollows. These hollow structures will move around the gaps in the Rivet Cap to absorb excess heat from the palm.

The key is that the central sword guard needs a small mechanism to release the stored steam, so the carving in these areas needs to be extremely delicate.

Arro carefully carved for a long time, and even if he made a mistake, he could use the Melting Spell to gradually soften it and make corrections.

Having had ample opportunity to experiment and make mistakes, Arro eventually succeeded in refining it.

Thus, the overall structure is complete.

Arro placed the Silver Core into the unfolded steel blade and then activated 'Melting Spell' to forcefully close the steel blade.

Take out some more stones and place them in the fitting positions left for the 'Melting Stone' to completely seal the Silver Core in the middle. Then heat the whole thing up and use an iron hammer to hit it with all your might to fill any gaps in the middle.

Finally, it is heated and quenched.

"Laugh--!"

Sparks flew up with a wisp of smoke, and the pungent, oily odor filled the entire laboratory.

The bright red longsword gradually dimmed into a dark blue-black color. Arro opened the laboratory door and waited until the unpleasant smell had completely dissipated before taking out the pitted and unremarkable longsword from the Quenching Liquid.

First, remove the broken stones, then insert the cut Melting Stone, and then grind them continuously on Grinding Stone to make the surface neat and sharpen the blade.

As these processes unfolded, the sword gradually shone, becoming brighter and brighter.

By now, the Blazing Longsword is almost finished being forged, but the hollow tube in the hilt still needs to be filled with some Water-Retaining Material.

The first thing that came to Arro's mind was the 'Superabsorbent Resin' from his previous life. This is actually an artificial material that is used in many movies and TV shows to create Artificial Snow. It is also used in things like diapers, ashtray additives, and stress-relieving toys.

The molecular structure of 'Superabsorbent Resin' contains a network of molecular chains. When the superabsorbent comes into contact with water, it immediately undergoes electrolysis, dissociating into positively and negatively charged ions. These positively and negatively charged ions have a strong affinity for water, thus giving it extremely strong water absorption and water retention properties. It can quickly absorb hundreds or even thousands of times its own weight in water and swell into Hydrogel after absorbing water.

By filling the sword hilt with this material and using paper as Spacer Material, it can be ensured that Liquid Water will not rush out when the steam release structure is activated.

But... this is Synthetic Material after all, Arro can't make it!

Actually, flour also has good water retention properties, but the hilt of Arro's sword will generate heat afterward. If flour were used, cooked food could be prepared quickly, and the so-called water retention properties would naturally disappear.

Therefore, what Arro chose was a type of Shell Powder from this world.

This Shell Powder is somewhat similar in properties to 'Superabsorbent Resin', which is a common material used to remove moisture and is also highly absorbent.

Carefully pour the Shell Powder into it, then use the ' Water Fetching Spell to add Pure Water. Only then is the Blazing Longsword successfully crafted.

After resting for a while and eating something, Arro began to study the 'Airship Power Core' that Bosco had given him.

And then... I don't understand!

The surface was covered with all sorts of magic runes, which were far beyond the comprehension of a beginner like Arro!

However, these magic runes are divided into some areas. Arro tentatively input magic power, and after several attempts, he finally found the correct location to Magic Power Input.

This is actually easy to understand. Any device that wants to receive external power will naturally have a port to connect to the Outside World, just like the circuit on a toy. What Arro was looking for was this circuit.

After determining the Input Terminal, he carefully input a small amount of magic power. The 'Airship Power Core' hummed, and a notch on the outer end of the Metal Sphere gradually rotated half a circle.

It seems there's not enough magic power, resulting in poor driving performance.

But Arro had achieved his goal; he had identified another component, the position of which was the Power Output Terminal.

Through these experiments, Arro gradually deciphered the structure on the Metal Sphere.

The Metal Sphere was not sealed, and with all sorts of magical patterns appearing on its surface, as more and more structures were confirmed, Arro gradually found the structures he wanted.

Firstly, the Magic Power Absorption Structure.

This is the Fuel Port of the 'Airship Power Core,' which can also be understood as the battery section of this thing.

Secondly, the Kinetic Energy Conversion Structure.

This magic rune, when infused with magic power, will generate Rotating Wind Force.

Thirdly, the Kinetic Energy Control System.

This is easier to understand; it's a system for adjustment and control.

After confirming the three magic rune structures, Arro finally left the house and went to the Life Corner Street to buy some Magic Pattern Ink.

He then immediately returned to his laboratory and began to imitate the magic pattern structure of the 'Airship Power Core'.

The Mechanical Structure of the 'Airship Power Core' is very rudimentary. As long as these magic patterns can be successfully replicated, the 'Speed of Light Measurement' experiment can begin immediately.

And then... it failed again.

The magic runes are not as simple as Arro imagined; it's not as simple as just replicating the external appearance to succeed.

Arro had no choice but to go to the Library again and rent books on magic runes.

As time passed, Arro gradually came to understand the key to knowledge about magic runes.

The original magic runes were actually replicas of the structures of different spells. However, after a long period of development, they gradually grew into a new discipline and took a different development path from the structure of spells.

Magic runes are also a discipline!

However, to master Magic Patternology, we must first return to the issue of spellcasting.

Just like the problems Arro encountered when he first learned Trick, magic runes also require attention to the thickness of the ink, the angle of transition, whether it is done in one stroke or multiple strokes linked together, the type of Magic Pattern Ink, and so on.

End of Chapter
Prev
NovelSummaries
Next

Explore the wiki

Arro
Bosco

Comments

No comments yet.
AboutStatsAPIChangelogStatusContactPrivacyTermsDMCA
© 2026 RandomTranslator·v3.26·RSS